The Influence of nc-AlCrTiN/α-BN Coatings on Increasing the Durability of WC/Co Cutting Inserts in the Inconel Alloy Machining Process.

Anti-wear coatings obtained through PVD methods may significantly increase the durability of cutting tools by impacting their wear mechanisms. This study presents and discusses the results of studies on the impact of the thermal conductivity of PVD coatings on the intensity of the built-up edge (BUE) and built-up layer (BUL) formation in Inconel 600 alloy machining processes. The authors determine the microstructure, phase structure, mechanical properties (hardness, Young's modulus, and adhesion), and thermal conductivity of different PVD coatings selected for the purpose of the study and varying in terms of conductivity-i.e., AlCrTiN and AlCrTiN/BN. Machining processes were carried out under controlled conditions using VBGT160404-M3 cutting inserts with AlCrTiN and AlCrTiN/BN coatings deposited on their surface. The authors prove that the adjustment of the thermal conductivity of PVD coatings to the thermal conductivity of the tool and machined materials can help change the direction of heat flow to cool the cutting zone more effectively. The study results presented in this article show that the deposition of the AlCrTiN/BN coating reduces the friction wear on the tool flank by over 70% and lowers the intensity of BUE and BUL formation processes on the face by 10%, compared to the AlCrTiN coating.

Microfiltration Membranes Modified with Zinc by Plasma Treatment.

Polymer membranes play an important role in various filtration processes. The modification of a polyamide membrane surface by one-component Zn and ZnO coatings and two-component Zn/ZnO coatings is presented in this work. The technological parameters of the Magnetron Sputtering-Physical Vapor Deposition method (MS-PVD) for the coatings deposition process show an impact on the influence on the membrane's surface structure, chemical composition, and functional properties. The characterization of surface structure and morphology were analyzed by scanning electron microscopy. In addition, surface roughness and wettability measurements were also made. For checking the antibacterial activity, the two representative strains of bacteria Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) were used. The filtration tests showed that polyamide membranes covered with three types of coatings, one-component Zn coatings, ZnO coatings, and two-component Zn/ZnO coatings, presented similar properties. The obtained results show that using the MS-PVD method for modification of the membrane's surface is a very promising perspective in the prevention of biofouling.

Effects of Sterilization and Hydrolytic Degradation on the Structure, Morphology and Compressive Strength of Polylactide-Hydroxyapatite Composites.

Composites based on polylactide (PLA) and hydroxyapatite (HA) were prepared using a thermally induced phase separation method. In the experimental design, the PLA with low weight-average molar mass (Mw) and high Mw were tested with the inclusion of HA synthesized as whiskers or hexagonal rods. In addition, the structure of HA whiskers was doped with Zn, whereas hexagonal rods were mixed with Sr salt. The composites were sterilized and then incubated in phosphate-buffered saline for 12 weeks at 37 °C, followed by characterization of pore size distribution, molecular properties, density and mechanical strength. Results showed a substantial reduction of PLA Mw for both polymers due to the preparation of composites, their sterilization and incubation. The distribution of pore size effectively increased after the degradation process, whereas the sterilization, furthermore, had an impact on pore size distribution depending on HA added. The inclusion of HA reduced to some extent the degradation of PLA quantitatively in the weight loss in vitro compared to the control without HA. All produced materials showed no cytotoxicity when validated against L929 mouse skin fibroblasts and hFOB 1.19 human osteoblasts. The lack of cytotoxicity was accompanied by the immunocompatibility with human monocytic cells that were able to detect pyrogenic contaminants.

Influence of Deposition Parameters of TiO2 + CuO Coating on the Membranes Surface Used in the Filtration Process of Dairy Wastewater on Their Functional Properties.

A novel approach of the deposition of two-component coating consisting of TiO2 and CuO on polymer membranes by MS-PVD method was presented in this work. This confirmed the possibility of using thin functional coatings for the modification of polymer membranes. The influence of technological parameters of the coating deposition on the membrane's structure, chemical composition and functional properties (hydrophilic, photocatalytic and bactericidal properties) were analyzed using SEM. Model microorganism such as Escherichia coli and Bacillus subtilis have been used to check the antibacterial properties. The results indicated that doping with CuO highlights the potential of bactericidal efficiency. The surface properties of the membranes were evaluated with the surface free energy. For evaluating photocatalytic properties, the UV and visible light were used. The filtration tests showed that polymer membranes treated with two-component TiO2 + CuO coatings have a permeate flux similar to the reference material (non-coated membrane). The obtained results constitute a very promising perspective of the potential application of magnetron sputtering for deposition of TiO2 + CuO coatings in the prevention of biofouling resulted from the membrane filtration of dairy wastewater.

Microfiltration Membranes Modified with Silver Oxide by Plasma Treatment.

Microfiltration (MF) membranes have been widely used for the separation and concentration of various components in food processing, biotechnology and wastewater treatment. The deposition of components from the feed solution and accumulation of bacteria on the surface and in the membrane matrix greatly reduce the effectiveness of MF. This is due to a decrease in the separation efficiency of the membrane, which contributes to a significant increase in operating costs and the cost of exploitative parts. In recent years, significant interest has arisen in the field of membrane modifications to make their surfaces resistant to the deposition of components from the feed solution and the accumulation of bacteria. The aim of this work was to develop appropriate process parameters for the plasma surface deposition of silver oxide (AgO) on MF polyamide membranes, which enables the fabrication of filtration materials with high permeability and antibacterial properties.

Microfiltration Membranes Modified with Composition of Titanium Oxide and Silver Oxide by Magnetron Sputtering.

In this work, the authors present the possibility of modification of polymer membranes by TiO2 + AgO coating created by the magnetron sputtering method. The two-component TiO2 + AgO coating can improve and shape new functional properties such as bactericidal and photocatalytic properties. The influence of magnetron power changes on the structure of the membrane was investigated as well. The structure and elemental composition of TiO2 + AgO coatings were analyzed using SEM and EDS technique. All deposited coatings caused a total inhibition of the growth of two investigated colonies of Escherichia coli and Bacillus subtilis on the surface. The photocatalytic properties for membranes covered with oxide coatings were tested under UV irradiation and visible light. The filtration result show that polymer membranes covered with two-component TiO2 + AgO coatings have a permeate flux similar to the non-coated membranes.

Ionic Porous Organic Polymers Based on Functionalized Tetraarylborates.

Lithium tetrakis(4-boronatoaryl)borates were subjected to polycondensation reactions with selected polyhydroxyl monomers such as 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 2,3,6,7-tetrahydroxy-9,10-dimethylanthracene (THDMA). Obtained boronate-type ionic porous polymers TAB1-4 were characterized by PXRD, 6Li and 11B magic-angle spinning nuclear magnetic resonance (MAS NMR), FT-IR, SEM, and TGA. They exhibit relatively good sorption of H2 (up to 75 cm3/g STP), whereas N2 uptake at 77 K for lower pressure range is relatively poor (up to 50 cm3/g STP below P/P0 = 0.8). In addition, the effect of elongation of aryl arms in the tetraarylborate core on the materials' properties was studied. Thus, it was found that replacement of the 4-boronatophenyl with 4-boronatobiphenylyl group has a negative impact on the sorption characteristics.

Hybrid Triazine-Boron Two-Dimensional Covalent Organic Frameworks: Synthesis, Characterization, and DFT Approach to Layer Interaction Energies.

The conversion of 2,4,6-tris(4'-bromophenyl)-1,3,5-triazine to the respective triboronic acid was successfully accomplished by a simple triple Br/Li exchange followed by boronation. Further dehydrative condensation reactions with 2,3,6,7,10,11-hexahydroxytriphenylene or 2,3,6,7-tetrahydroxy-9,10-dilalkylanthracenes (R = Me, Et) resulted in materials featuring good porosity and sorption properties with the nitrogen uptake exceeding 500 cm3/g (STP) and SBET up to 1267 m2/g (T = 77.2 K). In addition, simple dehydration of this compound was employed for the preparation of a hybrid 2D COF composed of triazine, boroxine, and benzene rings. The formation of materials was confirmed by the IR analysis and NMR studies on water-decomposed samples. All obtained COFs exhibit high thermal stability with decomposition temperatures in the range of 400-600 °C. They also show quite different morphology ranging from regular 0.5-4 µm spherical and ellipsoidal clusters to 5-12 µm bent rodlike particles. The PXRD studies supported by periodic DFT modeling in Crystal09 package revealed the formation of crystalline 2D honeycomb-type lattices with eclipsed stacking models. In addition, the differences between boroxine-triazine material and related COF-1 and CTF-1 structures were investigated by comparing layer interaction energies, work function values as well as atomic charges and electrostatic potential maps plotted on the electron density surfaces. It demonstrates that the interactions between layers are enhanced by the stacking of triazine and boroxine rings. Finally, we have investigated the upper limit to space accessible volume using a procrystal electron density approach.

Biocorrosion of 316LV steel used in oral cavity due to Desulfotomaculum nigrificans bacteria.

Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X-Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration - 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100-200 µm2 . © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222-229, 2017.