Conformations of silica-bound (pentafluorophenyl)propyl groups determined by solid-state NMR spectroscopy and theoretical calculations.

The conformations of (pentafluorophenyl)propyl groups (-CH(2)-CH(2)-CH(2)-C(6)F(5), abbreviated as PFP), covalently bound to the surface of mesoporous silica nanoparticles (MSNs), were determined by solid-state NMR spectroscopy and further refined by theoretical modeling. Two types of PFP groups were described, including molecules in the prone position with the perfluorinated aromatic rings located above the siloxane bridges (PFP-p) and the PFP groups denoted as upright (PFP-u), whose aromatic rings do not interact with the silica surface. Two-dimensional (2D) (13)C-(1)H, (13)C-(19)F and (19)F-(29)Si heteronuclear correlation (HETCOR) spectra were obtained with high sensitivity on natural abundance samples using fast magic angle spinning (MAS), indirect detection of low-gamma nuclei and signal enhancement by Carr-Purcell-Meiboom-Gill (CPMG) spin-echo sequence. 2D double-quantum (DQ) (19)F MAS NMR spectra and spin-echo measurements provided additional information about the structure and mobility of the pentafluorophenyl rings. Optimization of the PFP geometry, as well as calculations of the interaction energies and (19)F chemical shifts, proved very useful in refining the structural features of PFP-p and PFP-u functional groups on the silica surface. The prospects of using the PFP-functionalized surface to modify its properties (e.g., the interaction with solvents, especially water) and design new types of the heterogeneous catalytic system are discussed.

Bis(oxazolinyl)phenylborane: a Lewis acid-containing ligand for methide abstraction-based coordination to aluminum(III).

A compound that contains a Lewis acidic boron center and coordinating oxazoline groups, bis(4,4-dimethyl-2-oxazolinyl)phenylborane (PhB(Ox(Me2))2; 1), has been prepared and spectroscopically characterized. Solvent dependent 15N and 11B NMR spectroscopic properties and solid-state 11B NMR measurements provide support for intermolecular interactions involving Lewis acid and base sites. The bifunctional nature of oxazolinylborane 1 is demonstrated by its reaction with (AlMe3)2, which proceeds via methide abstraction by the boron and oxazoline coordination to aluminum to yield [(kappa(2)-PhMeB(Ox(Me2))2AlMe2] (2). Compound 2 contains a planar six-membered chelate ring, in contrast to related bis(pyrazolyl)boratoaluminum compounds that are puckered. Additionally, compound 2 and related bidentate tris(oxazolinyl)phenylborato dimethylaluminum are inert toward aluminum-methyl bond protonolysis. This robust nature suggested the possibility of using these oxazolinylboratoaluminum compounds in catalytic reactions, as is demonstrated by lactide ring-opening polymerization.

Solid-state NMR investigations of the immobilization of a BF4(-) salt of a palladium(II) complex on silica.

The structure of the silica supported palladium(II) complex [Pd(dppp)(S2C-NEt2)]BF4 (abbreviated as [Pd(dppp)(dtc)]BF4, where dppp is Ph2P(CH2)3PPh2) and interactions between the [Pd(dppp)(dtc)]+ cation, the BF4(-) anion, and the silica surface are studied using solid-state NMR spectroscopy. The unsupported, crystalline form of [Pd(dppp)(dtc)]BF4 is also investigated, both by X-ray diffraction and NMR. The structures of the cation and anion are found to be essentially the same in both unsupported and supported complex. The [Pd(dppp)(dtc)]BF4 loading has been determined by quantitative measurements of 11B, 19F, and 31P intensities, whereas the arrangement of anions and cations on the surface of silica has been established by two-dimensional heteronuclear correlation experiments involving 1H, 11B, 13C, 19F, 29Si, and 31P nuclei. At low coverages, the [Pd(dppp)(dtc)]+ cations are located near the BF4(-) anions, which in turn are immobilized directly on the surface near the Q4 sites. At higher loadings, which in this study corresponded to 0.06-0.15 mmol/g, the complexes stack on top of each other, despite the fact that the directly adsorbed molecules take up less than 10% of the silica surface. The relevance of these findings to heterogeneous catalysis is discussed.

Indirectly detected through-bond chemical shift correlation NMR spectroscopy in solids under fast MAS: studies of organic-inorganic hybrid materials.

Indirectly detected, through-bond NMR correlation spectra between (13)C and (1)H nuclei are reported for the first time in solid state. The capabilities of the new method are demonstrated using naturally abundant organic-inorganic mesoporous hybrid materials. The time performance is significantly better, almost by a factor of 10, than in the corresponding (13)C detected experiment. The proposed scheme represents a new analytical tool for studying other solid-state systems and the basis for the development of more advanced 2D and 3D correlation methods.

Easily prepared chiral scorpionates: tris(2-oxazolinyl)boratoiridium(i) compounds and their interactions with MeOTf.

Optically active C 3-symmetric monoanionic ligands are uncommon in organometallic chemistry. Here we describe the synthesis of readily prepared tris(4 S-isopropyl-2-oxazolinyl)phenylborate [To (P)] and fluxional, zwitterionic four- and five-coordinate iridium(I) compounds [Ir(To (P))(eta (4)-C 8H 12)] ( 4) and [Ir(To (P))(CO) 2] ( 5). The highly fluxional nature of 4 and 5 makes structural assignment difficult, and the interaction between the iridium(I) center and the [To (P)] ligand is established by solid-state and solution (15)N NMR methods that permit the direct comparison between solution and solid-state structures. Although iridium cyclooctadiene 4 is a mixture of four- and five-coordinate species, the dicarbonyl 5 is only the five-coordinate isomer. The addition of electrophiles MeOTf and MeI provides the oxazoline N-methylated product rather than the iridium methyl oxidative addition product. N-Methylation was unequivocally proven by through-bond coupling observed in (1)H- (15)N HMBC experiments.

Determination of 27Al-29Si connectivities in zeolites with 2D 27Al-->29Si RAPT-CPMG-HETCOR NMR.

The recently introduced concept of the combined use of rotor assisted population transfer (RAPT) and Carr-Purcell-Meiboom-Gill (CPMG) techniques to boost the sensitivity of cross polarization (CP) based NMR experiments is applied to a synthetic zeolite (ZSM-4). The sensitivity was increased by a factor of approximately 4, which enabled acquisition of a high quality two-dimensional 27Al-29Si HETCOR (heteronuclear correlation) spectrum. By separating the resonances in two dimensions, through-space connectivities between spins were revealed and the effective resolution was improved in both dimensions, which allowed determination of the existing ambiguities in spectral assignments in this material. The spectra provided clear indication of random distribution of aluminum and silicon within the ZSM-4 network. Additionally, unexpected correlations were observed between different components of inhomogeneously broadened 29Si and 27Al lines, which are most likely due to differences in the second coordination sphere environments.

Characterization of covalent linkages in organically functionalized MCM-41 mesoporous materials by solid-state NMR and theoretical calculations.

The covalent linkages formed during functionalization of MCM-41 mesoporous molecular sieves with five chloroalkylsilanes ((EtO)3Si(CH2Cl), (MeO)3Si(CH2CH2CH2Cl), Cl3Si(CH2CH2CH3), Cl2Si(CH3)(CH2Cl) and Cl2Si(CH3)2) have been investigated using high-resolution solid-state NMR spectroscopy and DFT calculations. Structural information was obtained from 1H-13C and 1H-29Si heteronuclear (HETCOR) NMR spectra, in which high resolution in the 1H dimension was obtained by using fast MAS. The 1H-13C HETCOR results provided the assignments of 1H and 13C resonances associated with the surface functional groups. Sensitivity-enhanced 1H-29Si HETCOR spectra, acquired using Carr-Purcell-Meiboom-Gill refocusing during data acquisition, revealed the identity of 29Si sites (Qn, Tn, and Dn) and the location of functional groups relative to these sites. Optimal geometries of local environments representing the Qn, Tn and Dn resonances were calculated using molecular mechanics and ab initio methods. Subsequently, DFT calculations of 29Si, 13C, and 1H chemical shifts were performed using Gaussian 03 at the B3LYP/6-311++G(2d,2p) level. The theoretical calculations are in excellent accord with the experimental chemical shifts. This work illustrates that state-of-the-art spectroscopic and theoretical tools can be used jointly to refine the complex structures of inorganic-organic hybrid materials.

SPAM-MQ-HETCOR: an improved method for heteronuclear correlation spectroscopy between quadrupolar and spin-1/2 nuclei in solid-state NMR.

The recently introduced concept of soft pulse added mixing (SPAM) is used in two-dimensional heteronuclear correlation (HETCOR) NMR experiments between half-integer quadrupolar and spin-1/2 nuclei. The experiments employ multiple quantum magic angle spinning (MQMAS) to remove the second order quadrupolar broadening and cross polarization (CP) or refocused INEPT for magnetization transfer. By using previously unexploited coherence pathways, the efficiency of SPAM-MQ-HETCOR NMR is increased by a factor of almost two without additional optimization. The sensitivity gain is demonstrated on a test sample, AlPO(4)-14, using CP and INEPT to correlate (27)Al and (31)P nuclei. SPAM-3Q-HETCOR is then applied to generate (27)Al-(31)P spectra of the devitrified 41Na(2)O-20.5Al(2)O(3)-38.5P(2)O(5) glass and the silicoaluminophosphate ECR-40. Finally, the method allowed the acquisition of the first high resolution solid-state correlation spectra between (27)Al and (29)Si.

Dialkylaminopyridine-functionalized mesoporous silica nanosphere as an efficient and highly stable heterogeneous nucleophilic catalyst.

A new nucleophilic catalytic system comprised of dialkylaminopyridine-functionalized mesoporous silica nanosphere (DMAP-MSN) has been synthesized and characterized. We have demonstrated that this material is an efficient heterogeneous catalyst for Baylis-Hillman, acylation, and silylation reactions with good reactivity, product selectivity, and recyclability. We envision that this DMAP-functionalized mesoporous silica material can also serve as an effective heterogeneous catalyst for many other catalytic nucleophilic reactions.

Studies of organically functionalized mesoporous silicas using heteronuclear solid-state correlation NMR spectroscopy under fast magic angle spinning.

Highly resolved solid-state HETCOR NMR spectra between protons and low gamma nuclei ((13)C and (29)Si) can be suitably obtained on surfaces using a "brute force" (1)H-(1)H decoupling by MAS at rates > or =40 kHz. Despite a small rotor volume (<10 microL), a (1)H-(13)C HETCOR spectrum of allyl groups (AL, -CH(2)-CH=CH(2)) covalently anchored to the surface of MCM-41 silica was acquired without using isotope enrichment. The advantages of using fast MAS in such studies include easy setup, robustness, and the opportunity of using low RF power for decoupling. In the case of the (1)H-(29)Si HETCOR experiment, the sensitivity can be dramatically increased, in some samples by more than 1 order of magnitude, through implementing into the pulse sequence a Carr-Purcell-Meiboom-Gill train of pi pulses at the (29)Si spin frequency. The use of low-power heteronuclear decoupling is essential in the (1)H-(29)Si CPMG-HETCOR experiment, due to unusually long acquisition periods. These methods provided detailed structural characterization of the surface of AL-MCM mesoporous silica.

Solid-state NMR study of MCM-41-type mesoporous silica nanoparticles.

A systematic study of the surface of MCM-41-type mesoporous silica nanoparticles prepared under low surfactant concentration was carried out using high-resolution solid-state nuclear magnetic resonance spectroscopy. The structures and concentrations of various species present during dehydration and rehydration of mesoporous silicas between -25 and 500 degrees C were detailed by employing one-dimensional and two-dimensional (1)H, (13)C, and (29)Si NMR, including (1)H signal intensity measurements, (1)H-(1)H homonuclear correlation experiments (double quantum, exchange, and RFDR), and (1)H-(29)Si heteronuclear correlation NMR. These experiments employed high MAS rates of up to 45 kHz. The study shows that the surfactant (CTAB) was almost completely removed by acid extraction. The residual molecules assumed prone positions along the pores, with the tailgroup being most mobile. The weakly adsorbed water was hydrogen bonded to the silanol groups, all of which were involved in such bonds under ambient humidity. Specific structures involving water and silanol groups were proposed for various stages of thermal treatment, which included dehydration, dehydroxylation, and subsequent rehydration.

Gatekeeping layer effect: a poly(lactic acid)-coated mesoporous silica nanosphere-based fluorescence probe for detection of amino-containing neurotransmitters.

We have synthesized a poly(lactic acid) coated MCM-41-type mesoporous silica nanosphere (PLA-MSN) material can serve as a fluorescence sensor system for detection of amino-containing neurotransmitters in neutral aqueous buffer. Utilizing the PLA layer as a gatekeeper, we investigated the molecular recognition events between several structurally simple neurotransmitters, i.e., dopamine, tyrosine, and glutamic acid and a pore surface-anchored o-phthalic hemithioacetal (OPTA) group, which functions as a fluorescence-sensing group that can react with the neurotransmitters with primary amine groups and form the corresponding fluorescent isoindole products. The poly(lactic acid) layer of the PLA-MSN sensor showed a unique "sieving" effect that regulates the rates of diffusion of the amino acid-based neurotransmitters into the sensor mesopores of the material.

Controlling the selectivity of competitive nitroaldol condensation by using a bifunctionalized mesoporous silica nanosphere-based catalytic system.

A series of bifunctionalized mesoporous silica nanosphere-based (MSN) heterogeneous catalysts for the nitroaldol (Henry) reaction have been synthesized. A common 3-[2-(2-aminoethylamino)ethylamino]propyl (AEP) primary group and three different secondary groups, ureidopropyl (UDP), mercaptopropyl (MP), and allyl (AL) functionalities, were incorporated to these mesoporous silica materials by introducing equal amounts of AEP-trimethoxysilane with UDP-, MP-, or AL-trialkoxysilane precursors to our previously reported co-condensation reaction. Structures and relative concentrations of the functional groups were detailed by solid-state NMR and other spectroscopic techniques. The AEP group served as a catalyst, and the other secondary groups provided different noncovalent interactions to reactants and thereby controlled the reaction selectivity. By varying the secondary group in these bifunctionalized MSN catalysts, we investigated the selectivity of a nitroaldol reaction of two competing benzaldehydes reacting with nitromethane by measuring the molar ratio of the nitroalkene products. The selectivity of the bifunctionalized MSN catalysts could be systematically tuned simply by varying the physicochemical properties of the pore surface-bound secondary groups, i.e., polarity and hydrophobicity.

Tuning of particle morphology and pore properties in mesoporous silicas with multiple organic functional groups.

A synthetic method has been developed that can control both multifunctionalization and morphology of the mesoporous organic-inorganic hybrid materials by introducing different molar ratios of organoalkoxysilane precursors to a base-catalyzed co-condensation of silicate.

Solvent-free mechanochemical synthesis of two Pt complexes: cis-(Ph3P)2PtCl2 and cis-(Ph3P)2PtCO3.

Cis-(Ph3P)2PtCl2 and cis-(Ph3P)2PtCO3 were prepared mechanochemically from solid reactants in the absence of a solvent; cis-(Ph3P)2PtCl2 was obtained in 98% yield after ball-milling of polycrystalline PtCl2 and Ph3P; the mechanically induced solid-state reaction of cis-(Ph3P)2PtCl2 with an excess of anhydrous K2CO3 produced cis-(Ph3P)2PtCO3 in 70% yield; the formation of transition metal complexes as a result of mechanochemical solvent-free reactions has been confirmed by means of solid-state 31P MAS NMR spectroscopy, X-ray powder diffraction and differential thermal analysis.

Solvent-free mechanochemical synthesis of phosphonium salts.

Phosphonium salts have been prepared during high-energy ball-milling of triphenylphosphine with solid organic bromides; the reactions occur at ambient conditions without a solvent; in the case of 2-bromo-2-phenylacetophenone the reaction in a solution usually produces a mixture containing both the C-phosphorylated and O-phosphorylated compounds, while the solvent-free mechanically induced transformation results in the thermodynamically favorable C-phosphorylated product; the occurrence of the observed transformations during mechanical processing of solid reactants is confirmed by the solid-state 31P NMR spectroscopy and X-ray powder diffraction.

17O MAS and 3QMAS NMR investigation of crystalline V(2)O(5) and layered V(2)O(5).nH(2)O gels.

The environments for oxygen sites in crystalline V(2)O(5) and in layered vanadia gels produced via sol-gel synthesis have been investigated using (17)O MAS and 3QMAS NMR. For crystalline V(2)O(5), three structural oxygen sites were observed: V=O (vanadyl), V(2)O (doubly coordinated), and V(3)O (triply coordinated). Line-shape parameters for these sites were determined from numerical simulations of the MAS spectra. For the vanadia gels at various stages of dehydration, assignments have been proposed for numerous vanadyl, doubly coordinated, and triply coordinated oxygen sites. In addition, by correlating the (17)O MAS and 3QMAS NMR, (51)V MAS NMR, and thermogravimetric analysis data, the coordination of water sites has been established. On the basis of these results, the gel structure and its evolution at various stages of hydration have been detailed. Upon rehydration of the layered gel, we observed a preferred site for initial water readsorption. The oxygen atoms of these readsorbed water molecules readily exchanged into all types of oxygen sites even at room temperature.

Mechanically induced solid-state generation of phosphorus ylides and the solvent-free Wittig reaction.

We describe the nearly quantitative preparation of phosphorus ylides and the Wittig reaction occurring in the solid sate during high-energy mechanochemical processing. Initial insights into the details of the discovered chemical transformations indicate that high-energy mechanical processing supports the interaction of reacting centers by breaking crystallinity of the reactants and by providing mass transfer without a solvent.