Frequency stabilization of a terahertz quantum-cascade laser to the Lamb dip of a molecular absorption line.

We demonstrate the frequency stabilization of a terahertz quantum-cascade laser (QCL) to the Lamb dip of the absorption line of a D2O rotational transition at 3.3809309 THz. To assess the quality of the frequency stabilization, a Schottky diode harmonic mixer is used to generate a downconverted QCL signal by mixing the laser emission with a multiplied microwave reference signal. This downconverted signal is directly measured by a spectrum analyzer showing a full width at half maximum of 350 kHz, which is eventually limited by high-frequency noise beyond the bandwidth of the stabilization loop.

Frequency and power stabilization of a terahertz quantum-cascade laser using near-infrared optical excitation.

We demonstrate a technique to simultaneously stabilize the frequency and output power of a terahertz quantum-cascade laser (QCL). This technique exploits frequency and power variations upon near-infrared illumination of the QCL with a diode laser. It does not require an external terahertz optical modulator. By locking the frequency to a molecular absorption line, we obtain a long-term (one-hour) linewidth of 260 kHz (full width at half maximum) and a root-mean-square power stability below 0.03%. With respect to the free-running case, this stabilization scheme improves the frequency stability by nearly two orders of magnitude and the power stability by a factor of three.

Wideband, high-resolution terahertz spectroscopy by light-induced frequency tuning of quantum-cascade lasers.

Near-infrared optical excitation enables wideband frequency tuning of terahertz quantum-cascade lasers. In this work, we demonstrate the feasibility of the approach for molecular laser absorption spectroscopy. We present a physical model which explains the observed frequency tuning characteristics by the optical excitation of an electron-hole plasma. Due to an improved excitation configuration as compared to previous work, we observe a single-mode continuous-wave frequency coverage of as much as 40 GHz for a laser at 3.1 THz. This represents, for the same device, a ten-fold improvement over the usually employed tuning by current. The method can be readily applied to a large class of devices.

Doppler-free spectroscopy with a terahertz quantum-cascade laser.

We report on the Doppler-free saturation spectroscopy of a molecular transition at 3.3 THz based on a quantum-cascade laser and an absorption cell in a collinear pump-probe configuration. A Lamb dip with a sub-Doppler linewidth of 170 kHz is observed for a rotational transition of HDO. We found that a certain level of external optical feedback is tolerable as long as the free spectral range of the external cavity is large compared to the width of the absorption line.

High-temperature, continuous-wave operation of terahertz quantum-cascade lasers with metal-metal waveguides and third-order distributed feedback.

Currently, different competing waveguide and resonator concepts exist for terahertz quantum-cascade lasers (THz QCLs). We examine the continuous-wave (cw) performance of THz QCLs with single-plasmon (SP) and metal-metal (MM) waveguides fabricated from the same wafer. While SP QCLs are superior in terms of output power, the maximum operating temperature for MM QCLs is typically much higher. For SP QCLs, we observed cw operation up to 73 K as compared to 129 K for narrow (≤ 15 µm) MM QCLs. In the latter case, single-mode operation and a narrow beam profile were achieved by applying third-order distributed-feedback gratings and contact pads which are optically insulated from the intended resonators. We present a quantitative analytic model for the beam profile, which is based on experimentally accessible parameters.

Evidence for frequency comb emission from a Fabry-Pérot terahertz quantum-cascade laser.

We report on a broad-band terahertz quantum-cascade laser (QCL) with a long Fabry-Pérot ridge cavity, for which the tuning range of the individual laser modes exceeds the mode spacing. While a spectral range of approximately 60 GHz (2 cm(-1)) is continuously covered by current and temperature tuning, the total emission range spans more than 270 GHz (9 cm(-1)). Within certain operating ranges, we found evidence for stable frequency comb operation of the QCL. An experimental technique is presented to characterize frequency comb operation, which is based on the self-mixing effect.

Frequency modulation spectroscopy with a THz quantum-cascade laser.

We report on a terahertz spectrometer for high-resolution molecular spectroscopy based on a quantum-cascade laser. High-frequency modulation (up to 50 MHz) of the laser driving current produces a simultaneous modulation of the frequency and amplitude of the laser output. The modulation generates sidebands, which are symmetrically positioned with respect to the laser carrier frequency. The molecular transition is probed by scanning the sidebands across it. In this way, the absorption and the dispersion caused by the molecular transition are measured. The signals are modeled by taking into account the simultaneous modulation of the frequency and amplitude of the laser emission. This allows for the determination of the strength of the frequency as well as amplitude modulation of the laser and of molecular parameters such as pressure broadening.

Lateral distributed-feedback gratings for single-mode, high-power terahertz quantum-cascade lasers.

We report on terahertz quantum-cascade lasers (THz QCLs) based on first-order lateral distributed-feedback (lDFB) gratings, which exhibit continuous-wave operation, high output powers (>8 mW), and single-mode emission at 3.3-3.4 THz. A general method is presented to determine the coupling coefficients of lateral gratings in terms of the coupled-mode theory, which demonstrates that large coupling strengths are obtained in the presence of corrugated metal layers. The experimental spectra are in agreement with simulations of the lDFB cavities, which take into account the reflective end facets.

A compact, continuous-wave terahertz source based on a quantum-cascade laser and a miniature cryocooler.

We report on the development of a compact, easy-to-use terahertz radiation source, which combines a quantum-cascade laser (QCL) operating at 3.1 THz with a compact, low-input-power Stirling cooler. The QCL, which is based on a two-miniband design, has been developed for high output and low electrical pump power. The amount of generated heat complies with the nominal cooling capacity of the Stirling cooler of 7 W at 65 K with 240 W of electrical input power. Special care has been taken to achieve a good thermal coupling between the QCL and the cold finger of the cooler. The whole system weighs less than 15 kg including the cooler and power supplies. The maximum output power is 8 mW at 3.1 THz. With an appropriate optical beam shaping, the emission profile of the laser is fundamental Gaussian. The applicability of the system is demonstrated by imaging and molecular-spectroscopy experiments.