The Impact of Abiotic and Biotic Conditions for Degradation Behaviors of Common Biodegradable Products in Stabilized Composts.

This work examines the influence of the degradation behaviors of biotic and abiotic conditions on three types of biodegradable products: cups from PLA and from cellulose, and plates from sugarcane. The main objective of this study was to evaluate if biodegradable products can be degraded in composts that were stabilized by backyard composting. Furthermore, the impact of crucial abiotic parameters (temperature and pH) for the degradation behaviors process was investigated. The changes in the biopolymers were analyzed by FTIR spectroscopy. This work confirmed that abiotic and biotic conditions are important for an effective disintegration of the investigated biodegradable products. Under abiotic conditions, the degradation behaviors of PLA were observable under both tested temperature (38 and 59 °C) conditions, but only at the higher temperature was complete disintegration observed after 6 weeks of incubation in mature compost. Moreover, our research shows that some biodegradable products made from cellulose also need additional attention, especially with respect to incorporated additives, as composting could be altered and optimal conditions in composting may not be achieved. This study shows that the disintegration of biodegradable products is a comprehensive process and requires detailed evaluation during composting. The results also showed that biodegradable products can also be degraded post composting and that microplastic pollution from biodegradable polymers in soil may be removed by simple physical treatments.

The Study of Humic Substances' Impact on Anion Exchangers.

Humic substances (HSs) present in water and wastewater cause fouling of anion exchange resins (AERs), which mainly results in reducing the ion exchange capacity (IEC). In this paper, an attempt was made to investigate fouling of two polystyrene and one polyacrylic AER using water from the Oder River, treated wastewater after the ultrafiltration process (UFTW) and digester reject water from sludge dewatering at the Janówek Wastewater Treatment Plant (WWTP) in Wroclaw. HSs contained in digester reject water were characterised by the lowest aromaticity and molecular weights (MWs), the highest proportion of hydrophilic fraction and the highest amount of oxygenated functional groups. The Fourier-transform infrared (FTIR) analyses made it possible to identify chemical bonds characteristic of HSs and determine the mechanism of their retention on the surface of AER beads. The conducted experiments brought unexpected results, as the IEC increased with the amount of organic matter in the feed. Presumably, the humic substances accumulated on the beads and in the porosity of the anion exchangers themselves participated in the ion exchange process.