Ascorbic Acid Changes Growth of Food-Borne Pathogens in the Early Stage of Biofilm Formation.

Since bacterial biofilm may contribute to the secondary contamination of food during the manufacturing/processing stage there is a need for new methods allowing its effective eradication. Application of food additives such as vitamin C already used in food industry as antioxidant food industry antioxidants may be a promising solution. The aim of this research was evaluation of the impact of vitamin C (ascorbic acid), in a range of concentrations 2.50 µg mL-1-25.0 mg mL-1, on biofilms of Staphylococcus aureus, Escherichia coli, and Listeria monocytogenes strains isolated from food. The efficacy of ascorbic acid was assessed based on the reduction of optical density (λ = 595 nm). The greatest elimination of the biofilm was achieved at the concentration of vitamin C of 25.0 mg mL-1. The effect of the vitamin C on biofilm, however, was strain dependent. The concentration of 25.0 mg mL-1 reduced 93.4%, 74.9%, and 40.5% of E. coli, L. monocytogenes, and S. aureus number, respectively. For E. coli and S. aureus lower concentrations were ineffective. In turn, for L. monocytogenes the biofilm inhibition was observed even at the concentration of 0.25 mg mL-1. The addition of vitamin C may be helpful in the elimination of bacterial biofilms. Nonetheless, some concentrations can induce growth of the pathogens, posing risk for the consumers' health.

Characteristics of Listeria monocytogenes Strains Isolated from Milk and Humans and the Possibility of Milk-Borne Strains Transmission.

Listeria monocytogenes is the etiological factor of listeriosis. The main source of these organisms is food, including dairy products. The aim was to determine the multiple correlations between the drug susceptibility, virulence genes (VGs), and biofilm formation on silicone teat cups of milk-borne and human L. monocytogenes strains. The spread of L. monocytogenes via contaminated teat rubbers was assessed. The L. monocytogenes strains recovered from milk (18), human blood (10), and the reference strain ATCC®19111™ were used in the study. Penicillin resistance was the most prevalent resistance in the milk isolates (n=8; 44.4%), whereas among clinical strains erythromycin resistance was predominating - (n=6; 60%). The most frequent VGs among strains isolated from milk were hlyA (100%) and plcB (100%) whereas in strains isolated from blood - hlyA (100%) and prfA (90%). All tested VGs were present in 50% of blood isolates and 11% of milk-borne strains. The strains isolated from milk formed a significantly stronger biofilm. The strains with more numerous virulence genes were resistant to more antibiotics and formed a stronger biofilm. It was shown that contaminated teat cups might contribute to the transmission of L. monocytogenes in the herd. It seems reasonable to monitor the occurrence of L. monocytogenes biofilm in a dairy processing environment.Listeria monocytogenes is the etiological factor of listeriosis. The main source of these organisms is food, including dairy products. The aim was to determine the multiple correlations between the drug susceptibility, virulence genes (VGs), and biofilm formation on silicone teat cups of milk-borne and human L. monocytogenes strains. The spread of L. monocytogenes via contaminated teat rubbers was assessed. The L. monocytogenes strains recovered from milk (18), human blood (10), and the reference strain ATCC®19111™ were used in the study. Penicillin resistance was the most prevalent resistance in the milk isolates (n=8; 44.4%), whereas among clinical strains erythromycin resistance was predominating ­ (n=6; 60%). The most frequent VGs among strains isolated from milk were hlyA (100%) and plcB (100%) whereas in strains isolated from blood ­ hlyA (100%) and prfA (90%). All tested VGs were present in 50% of blood isolates and 11% of milk-borne strains. The strains isolated from milk formed a significantly stronger biofilm. The strains with more numerous virulence genes were resistant to more antibiotics and formed a stronger biofilm. It was shown that contaminated teat cups might contribute to the transmission of L. monocytogenes in the herd. It seems reasonable to monitor the occurrence of L. monocytogenes biofilm in a dairy processing environment.

Disinfectant Susceptibility of Biofilm Formed by Listeria monocytogenes under Selected Environmental Conditions.

Listeria monocytogenes is a one of the most important food-borne pathogens. Its ability to form biofilm contributes to increased resistance to disinfectants and inefficient disinfection, posing a serious threat for the food industry, and in the end the consumer. The aim of this study was the comparison of the biofilm formation ability of L. monocytogenes strains on stainless steel, under different environmental conditions (temperature, pH, NaCl concentration, nutrients availability), and the assessment of biofilm susceptibility to disinfectants. The bactericidal activity of four disinfectants in two concentrations (100% and 50% of working solution) against biofilm was conducted on four clinical strains, four strains isolated from food and one reference strain ATCC 19111. It was found that biofilm susceptibility to disinfectants was influenced by environmental conditions. Biofilm susceptibility correlated with the decrease of temperature, pH, nutrients availability and salinity of the environment. The least sensitive to disinfectants was biofilm produced at pH = 4 (the bacterial number ranged from 0.25 log CFU × cm-2 to 1.72 log CFU × cm-2) whereas the most sensitive was biofilm produced at pH = 9 (5.16 log CFU × cm-2 to 7.84 log CFU × cm-2). Quatosept was the most effective disinfectant, regardless of the conditions. In conclusion, biofilm susceptibility to disinfectants is strain-dependent and is affected by environmental conditions.

Biocidal Effectiveness of Selected Disinfectants Solutions Based on Water and Ozonated Water against Listeria monocytogenes Strains.

The aim of this study was to compare the biocidal effectiveness of disinfectants solutions prepared with ozonated and non-ozonated water against Listeria monocytogenes. Six L. monocytogenes strains were the research material (four isolates from food: meat (LMO-M), dairy products (LMO-N), vegetables (LMO-W), and fish (LMO-R); one clinical strain (LMO-K) and reference strain ATCC 19111). The evaluation of the biocidal effectiveness of disinfectant solutions (QAC-quaternary ammonium compounds; OA-oxidizing agents; ChC-chlorine compounds; IC-iodine compounds; NANO-nanoparticles) was carried out, marking the MBC values. Based on the obtained results, the effectiveness coefficient (A) were calculated. The smaller the A value, the greater the efficiency of disinfection solutions prepared on the basis of ozonated versus non-ozonated water. Ozonated water showed biocidal efficacy against L. monocytogenes. Among tested disinfectentants, independent on type of water used for preparation, the most effective against L. monocytogenes were: QAC 1 (benzyl-C12-18-alkydimethyl ammonium chlorides) (1.00 × 10-5-1.00 × 10-4 g/mL) in quaternary ammonium compounds, OA 3 (peracetic acid, hydrogen peroxide, bis (sulphate) bis (peroxymonosulfate)) (3.08 × 10-4 -3.70 × 10-3 g/mL) in oxidizing agents, ChC 1 (chlorine dioxide) (5.00 × 10-8 -7.00 × 10-7 g/mL) in chlorine compounds, IC 1 (iodine) (1.05-2.15 g/mL) in iodine compounds, and NANO 1 (nanocopper) (1.08 × 10-4 - 1.47 × 10-4 g/mL) in nanoparticles. The values of the activity coefficient for QAC ranged from 0.10 to 0.40, for OA-0.15-0.84, for ChC-0.25-0.83, for IC-0.45-0.60, and for NANO-0.70-0.84. The preparation of disinfectants solution on the basis of ozonated water, improved the microbicidal efficiency of the tested disinfectant, especially the quaternary ammonium compounds. An innovative element of our work is the use of ozonated water for the preparation of working solutions of the disinfection agents. Use ozonated water can help to reduce the use of disinfectant concentrations and limit the increasing of microbial resistance to disinfectants. This paper provides many new information to optimize hygiene plans in food processing plants and limit the spread of microorganisms such as L. monocytogenes.

Antilisterial Activity of Polypropylene Film Coated with Chitosan with Propolis and/or Bee Pollen in Food Models.

The aim of the study was to evaluate the effect of propylene film coated with solution of chitosan (CH), ethanolic extracts of propolis (EEP), and bee pollen (EEBP) and its combination on L. monocytogenes number in wrapped salmon, salami, and cheese. Sterile fragments of propylene film were coated with solution containing CH, CH+EEP, CH+EEBP, and CH+EEP+EEBP. The coated film was applied directly after preparation (AP) after 10 days of storage from preparation (AS). L. monocytogenes strains isolated from cheese, salmon, and salami were transferred on adequate food type. ATCC 19111 reference strain was placed on all examined slices. Contaminated slices were wrapped in the coated film. The film adhered strictly to the slices surface and was left for 0, 1, 6, 12, and 24 hours. Antilisterial activity of AP film was additionally assessed during 15-day storage of products wrapped in the coated film. In conclusion, the chitosan-coated film exhibited antibacterial activity. Incorporation of EPP and EEBP enhanced this activity. The antilisterial activity depended on the type and concentration of solutions, the types of food, and the origin of strains. This study proved that the time that passed since the use of coated film for packing food was of great importance.

Drug-susceptibility, biofilm-forming ability and biofilm survival on stainless steel of Listeria spp. strains isolated from cheese.

The aim of the study was to analyze the contamination of mold cheese (Brie, Camembert, Gorgonzola, Munster and Roquefort) with Listeria spp. and assessment of culturable cells number recovered from the biofilm formed on the surface of stainless steel by obtained strains. Identified isolates (MALDI TOF MS technique) were subjected to susceptibility testing (disk-diffusion method) and their genetic similarity (PFGE method), ability to form biofilm (quantitative method), biofilm dry weight, and biofilm survival on stainless steel were evaluated. Out of 250 samples of cheese 26 (10.4%) were Listeria spp. positive, including 15 isolates (6.0% of samples) of L. monocytogenes, 7 isolates of L. innocua (2.8% of samples) and 4 isolates of L. welshimeri species (1.6% of samples). Of the 26 isolates tested, 22 strains were genetically different. It was shown that L. innocua and L. welshimeri strains were sensitive to all antibiotics tested, while two (16.7%) L. monocytogenes strains were resistant to penicillin and one (8.3%) to erythromycin. L. monocytogenes formed biofilm most intensively on stainless steel, while L. welshimeri the least effectively. The median of bacteria number recovered from the biofilm for L. monocytogenes was 6.81 log CFU × cm-2, for L. innocua - 5.63 log CFU × cm-2, and for L. welshimeri - 4.93 log CFU × cm-2. The survival in the biofilm of Listeria spp. strains decreased along with the increase in a storage temperature of steel coupons. The longest survival time was reported at 4 °C, i.e. 47.58-124.41 days, with an elimination rate of 0.06-0.13 log CFU × day-1. Collectively, L. monocytogenes is the most prevalent species of Listeria genus in the mold cheese. The ability of L. monocytogenes strains to form biofilm on stainless steel and survive in the food processing environment increases chance of the secondary contamination of food posing risk to the consumer health.

Effect of Selected Environmental Factors on the Microbicidal Effectiveness of Radiant Catalytic Ionization.

The aim of this study was the assessment of the effect of time exposure, temperature, distance, and organic contaminants on radiant catalytic ionization (RCI) microbicidal effectiveness. The number of all examined bacteria decreased together with time exposure of RCI. The lowest recovery was obtained, both from the rubber surface (6.36 log CFU × cm-2) and steel (6.04 log CFU × cm-2) in the case of Escherichia coli O157:H7. On the other hand, Staphylococcus aureus was isolated in the largest number (rubber: 7.88 log CFU × cm-2, steel: 7.79 log CFU × cm-2). Among the tested environmental conditions, the greatest bacterial population was re-isolated at 4°C (distance: 0.5 m, time: 24 h), whereas the lowest population was found at a distance of 0.5 m (temperature: 20°C, time: 24 h) and on surfaces without contamination. In the samples treated with RCI, the bacterial population was the lowest on non-contaminated surfaces, ranging from 3.76 log CFU × cm-2 (E. coli O157:H7) to 5.58 log CFU × cm-2 (S. aureus) for the rubber, and from 3.26 log CFU × cm-2 (E. coli O157:H7) to 5.20 log CFU × cm-2 (S. aureus) for the stainless steel. The highest bacteria number was isolated from surfaces contaminated with meat and fish pulp. The lowest bacterial reduction caused by RCI was found in the case of rubber contaminated with meat-fish pulp (24 h, 0.5 m, 20°C). The reduction rate was equal to 0.89 log CFU × cm-2 for S. aureus, 1.17 log CFU × cm-2 for Listeria monocytogenes, 1.43 log CFU × cm-2 for Salmonella Enteritidis and 1.61 log CFU × cm-2 for E. coli O157:H7. In turn, the greatest bacterial reduction was found in the case of non-contaminated steel (24 h, 0.5 m, 37°C). The reduction rate was equal to 4.52 log CFU × cm-2 for L. monocytogenes, 3.61 log CFU × cm-2 for S. Enteritidis, 2.98 log CFU × cm-2 for E. coli O157:H7 and 2.77 log CFU × cm-2 for S. aureus. RCI allows the inactivation of pathogens from stainless steel and rubber surfaces. Its efficacy is species-dependent and affected by environmental factors.

Comparison of selected disinfectants efficiency against Listeria monocytogenes biofilm formed on various surfaces.

Listeria monocytogenes is a main etiological factor of listeriosis, spread mainly by food products. In recent years, an increasing number of patients with listeriosis and an augmentation in L. monocytogenes antibiotic resistance, e.g. to penicillin and ampicillin, has been reported. The aim of the study was to characterise the L. monocytogenes strains isolated from fish-processed food products. Species identification, based on the multiplex-PCR reaction, was performed, and the genetic similarity of the isolates was analysed with the RAPD technique. The strains, in the form of planktonic cells and a biofilm, were subjected to drug-susceptibility analysis, and the effect of disinfectants on the bacillus cells was evaluated. All of the analysed strains were of the Listeria monocytogenes species. Three genetically distant strains were detected, i.e. Lm I, Lm II and Lm III. Approximately 66.6% penicillin-resistant and 66.6% cotrimoxazole-resistant strains were found. No erythromycin-resistant strain was detected. The Lm II strain was simultaneously resistant to four antibiotics, i.e. penicillin, ampicillin, meropenem and cotrimoxazole. The strongest biofilm was formed on aluminium foil and the weakest on rubber. The tested disinfectant antibiofilm effectiveness was related to the type of surface. The most effective agent was paracetic acid and hydrogen peroxide (elimination rate 5.10-6.62 log CFU × cm-2 and 5.70-7.39 log CFU × cm-2 after 1- and 5-min exposure, respectively) and the least-sodium hydroxide (elimination rate 0.52-1.20 log CFU × cm-2 and 0.98-1.81 log CFU × cm-2 after 1- and 5-min exposure, respectively). Further studies on a greater number of L. monocytogenes strains are recommended.