NADPH:protochlorophyllide oxidoreductase from Synechocystis: overexpression, purification and preliminary characterisation.

NADPH:protochlorophyllide oxidoreductase (POR) catalyses the light-dependent reduction of protochlorophyllide to chlorophyllide, a key regulatory reaction in the chlorophyll biosynthetic pathway. POR from the cyanobacterium Synechocystis has been overproduced in Escherichia coli with a hexahistidine tag at the N-terminus. This enzyme (His(6)-POR) has been purified to homogeneity and a preliminary characterisation of its kinetic and substrate binding properties is presented. Chemical modification experiments have been used to demonstrate inhibition of POR activity by the thiol-specific reagent N-ethyl maleimide. Substrate protection experiments reveal that the modified Cys residues are involved in either substrate binding or catalysis.

The role of protein surface charge in catalytic activity and chloroplast membrane association of the pea NADPH: protochlorophyllide oxidoreductase (POR) as revealed by alanine scanning mutagenesis.

NADPH:protochlorophyllide oxidoreductase (POR) catalyzes the light-dependent reduction of protochlorophyllide (pchlide) to chlorophyllide (chlide) in the biosynthesis of chlorophyll. POR is a peripheral membrane protein that accumulates to high levels in the prolamellar bodies of vascular plant etioplasts and is present at low levels in the thylakoid membranes of developing and mature plastids. Clustered charged-to-alanine scanning mutagenesis of the pea (Pisum sativum L.) POR was carried out and the resulting mutant enzymes analyzed for their ability to catalyze pchlide photoconversion in vivo and to associate properly with thylakoid membrane preparations in vitro. Of 37 mutant enzymes examined, 5 retained wild-type levels of activity, 14 were catalytically inactive, and the remaining 18 exhibited altered levels of function. Several of the mutant enzymes showed temperature-dependent enzymatic activity, being inactive at 32 degrees C, but partially active at 24 degrees C. Mutations in predicted alpha-helical regions of the protein showed the least effect on enzyme activity, whereas mutations in predicted beta-sheet regions of the protein showed a consistent adverse affect on enzyme function. In the absence of added NADPH, neither wild-type POR nor any of the mutant PORs resisted proteolysis by thermolysin following assembly onto the thylakoid membranes. In contrast, when NADPH was present in the assay mixture, 13 of the 37 mutant PORs examined were found to be resistant to thermolysin upon treatment, suggesting that the mutations did not affect their ability to be properly attached to the thylakoid membrane. In general, the replacement of charged amino acids by alanine in the most N- and C-terminal regions of the mature protein did not significantly affect POR assembly, whereas mutations within the central core of the protein (between residues 86 and 342) were incapable of proper attachment to the thylakoid. Failure to properly associate with the thylakoid membrane in a protease resistant manner was only weakly correlated to loss of catalytic function. These studies are a first step towards defining structural determinants crucial to POR function and intraorganellar localization.

Purification and kinetic analysis of pea (Pisum sativum L.) NADPH:protochlorophyllide oxidoreductase expressed as a fusion with maltose-binding protein in Escherichia coli.

NADPH:protochlorophyllide oxidoreductase (POR) catalyses the light-dependent reduction of protochlorophyllide to chlorophyllide, a key reaction in the chlorophyll biosynthetic pathway. To facilitate structure-function studies, POR from pea (Pisum sativum L.) has been overexpressed in Escherichia coli as a fusion with maltose-binding protein (MBP) at 5-10% of the total soluble cell protein. The fusion protein (MBP-POR) has been purified to greater than 90% homogeneity by a two-step affinity-purification procedure. This represents the first successful overexpression and purification of a plant POR. MBP-POR was found to be active, and the kinetic properties were determined using a continuous assay in which the rate of chlorophyllide formation was measured. The Vmax was 20.6+/-0.9 nmol.min-1.mg-1 and the Km values for NADPH and protochlorophyllide were 8.7+/-1.9 microM and 0.27+/-0.04 microM respectively. These results represent the first determination of the kinetic properties of a pure POR and the first report on the kinetics of POR from a dicotyledenous plant. The experiments described here demonstrate that the enzyme is not a 'suicide' enzyme, and the only components required for catalysis are NADPH, protochlorophyllide and light. Size-exclusion chromatography on a Superose 6 HR column indicated that MBP-POR has a molecular mass of 155 kDa (compared with the molecular mass of 80 kDa estimated by SDS/PAGE), indicating that it behaves as a dimer in solution. This is the first direct determination of the oligomerization state of POR.

A light-dependent complementation system for analysis of NADPH:protochlorophyllide oxidoreductase: identification and mutagenesis of two conserved residues that are essential for enzyme activity.

Protochlorophyllide reductase (NADPH:protochlorophyllide oxidoreductase; EC 1.6.99.1) catalyzes the light-dependent reduction of protochlorophyllide to chlorophyllide, a key regulatory step in the chlorophyll biosynthetic pathway. We have developed an expression system in which the protochlorophyllide reductase from pea (Pisum sativum L.) is used to complement protochlorophyllide reduction mutants in the photosynthetic bacterium Rhodobacter capsulatus, allowing analysis of wild-type and mutant forms of the enzyme. By protein sequence comparisons, we have identified the plant protochlorophyllide reductases as belonging to the family of short-chain alcohol dehydrogenases. Based on our protein sequence alignments, we have identified and mutated two conserved residues (Tyr-275 and Lys-279) within the proposed active site of the enzyme and shown that they are critical for activity. A model of the enzyme reaction mechanism for light-dependent protochlorophyllide reduction is proposed.

Design of a specific phenyllactate dehydrogenase by peptide loop exchange on the Bacillus stearothermophilus lactate dehydrogenase framework.

Restriction sites were introduced into the gene for Bacillus stearothermophilus lactate dehydrogenase which enabled a region of the gene to be excised which coded for a mobile surface loop of polypeptide (residues 98-110) which normally seals the active site vacuole from bulk solvent and is a major determinant of substrate specificity. Oligonucleotide-overlap extension (using the polymerase chain reaction) was used to obtain double-stranded DNA regions which coded for different length and sequence loops and which also contained the same restriction sites. The variable length and sequence loops were inserted into the cut gene and used to synthesize hydroxyacid dehydrogenases with altered substrate specificities. Loops which were longer and shorter than the original were made. The substrate specificities of enzymes with these new loops were considerably altered. For many poor enzyme-substrate pairs, the effect of fructose 1,6-bisphosphate on the steady-state kinetic parameters suggested that the substrate was mainly bound in a nonproductive mode. With one longer loop construction (BL1), activity with pyruvate was reduced one-million-fold but activity with phenylpyruvate was largely unaltered. A switch in specificity (kcat/KM) of 390,000-fold was achieved. The 1700:1 selectivity of enzyme BL1 for phenylpyruvate over pyruvate is that required in a phenyllactate dehydrogenase to be used in monitoring phenylpyruvate in the urine of patients with phenylketonuria consuming an apparently phenylalanine-free diet.

Construction of a stable dimer of Bacillus stearothermophilus lactate dehydrogenase.

A molecular graphics analysis of the features which prevent cytosolic malate dehydrogenase dimers from forming tetramers was evaluated by its success in predicting the synthesis of a version of the LDH framework which is a stable dimer. Surface residues responsible for malate dehydrogenases being dimers were revealed by superimposing the structures of two dimers of pig cytosolic malate dehydrogenase on one homologous tetramer of L-lactate dehydrogenase from Bacillus stearothermophilus. Four regions were identified as composing the P-axis dimer-dimer interface. Two regions of the dimer were surface loops that collided when built as a tetramer: a large loop (residues 203-207, KNOBI) and a small loop (residues 264-269, KNOBII), and these were candidates to explain the dimeric character of malate dehydrogenase. The analysis was tested by constructing a synthetic B. stearothermophilus lactate dehydrogenase (KNOBI) containing the large malate dehydrogenase loop (residues 203-207 being AYIKLQAKE, and extra four amino acids). The new construct was thermotolerant (90 degrees C) and enzymically active with kcat and KM (pyruvate) values similar to those of the wild-type enzyme. However, whereas the allosteric activator fructose 1,6-bisphosphate decreased KM 100 times for wild type, it had no influence on KNOBI. The molecular volumes of 1-120 microM concentrations of the construct were measured by time-resolved decay of tryptophan fluorescence anisotropy and by gel filtration. Both methods showed the molecular weight of wild type increased from dimer to tetramer with Kd about 20 microM dimer. KNOBI remained a dimer under these conditions.(ABSTRACT TRUNCATED AT 250 WORDS)

Alteration of enzyme specificity and catalysis by protein engineering.

New substrate specificities can be introduced into existing enzymes for the purpose of making them more suitable for the chemoenzymic synthesis of single compound drugs and other chiral compounds. The most productive route used in the past year has involved the utilization of the catalytic and substrate-binding properties from homologous enzymes found in nature, one example being the broadening of the substrate specificity of yeast alcohol dehydrogenase. Other highlights include the creation of thermostable dehydrogenases that will interconvert NADPH and NADH, and the design of mutant enzymes with improved catalytic rates compared with their wild-type counterparts.

Design and synthesis of new enzymes based on the lactate dehydrogenase framework.

Analysis of the mechanism and structure of lactate dehydrogenases is summarized in a map of the catalytic pathway. Chemical probes, single tryptophan residues inserted at specific sites and a crystal structure reveal slow movements of the protein framework that discriminate between closely related small substrates. Only small and correctly charged substrates allow the protein to engulf the substrate in an internal vacuole that is isolated from solvent protons, in which water is frozen and hydride transfer is rapid. The closed vacuole is very sensitive to the size and charge of the substrate and provides discrimination between small substrates that otherwise have too few functional groups to be distinguished at a solvated protein surface. This model was tested against its ability to successfully predict the design and synthesis of new enzymes such as L-hydroxyisocaproate dehydrogenase and fully active malate dehydrogenase. Solvent friction limits the rate of forming the vacuole and thus the maximum rate of catalysis.

Designs for a broad substrate specificity keto acid dehydrogenase.

Variations have been made to the structure of the nicotinamide adenine dinucleotide (NAD) dependent L-lactate dehydrogenase from Bacillus stearothermophilus at regions of the enzyme that we believe determine specificity toward different alpha-hydroxy acids (RCHOHCOO-, R = CH3, C2H5, etc.). Two regions of LDH that border the active site (but are not involved in the catalytic reaction) were altered in order to accommodate substrates with hydrophobic side chains larger than that of the naturally preferred substrate, pyruvate (R = CH3). The mutations 102-105GlnLysPro----MetValSer and 236-237AlaAla----GlyGly were made to increase the tolerance for large hydrophobic substrate side chains. The triple and double mutants alone gave little improvement for branched-chain-substituted pyruvates. The five changes together produced a broader substrate specificity alpha-hydroxy acid dehydrogenase, with a 55-fold improved kcat for alpha-ketoisocaproate to a value about 1/14 that of the native enzyme for pyruvate. Rational protein engineering enabled coupled changes in enzyme structure to be obtained with greater probability of success than random mutagenesis.

On the effect on specificity of Thr246----Gly mutation in L-lactate dehydrogenase of Bacillus sterothermophilus.

The function of the amino acid Thr246 in L-lactate dehydrogenase from Bacillus stearothermophilus has been investigated by site-directed replacement with glycine. Kinetic experiments with a number of 2-oxo acids showed strongly reduced activity for the mutated enzyme. However, the mutant enzyme shows a relative preference for the large hydrophobic sidechains of alpha-keto acids and an even higher specific activity than the wild-type lactate dehydrogenase for the polar oxaloacetate substrate. Graphic analyses indicate that the loss of one hydrogen bond, or intrusion of water into the active site, might be responsible for the reduced activity. The kinetic results suggest that the binding modes of bulky hydrophobic or polar substrates compensate to some degree for the partially disrupted active site.

A specific, highly active malate dehydrogenase by redesign of a lactate dehydrogenase framework.

Three variations to the structure of the nicotinamide adenine dinucleotide (NAD)-dependent L-lactate dehydrogenase from Bacillus stearothermophilus were made to try to change the substrate specificity from lactate to malate: Asp197----Asn, Thr246----Gly, and Gln102----Arg). Each modification shifts the specificity from lactate to malate, although only the last (Gln102----Arg) provides an effective and highly specific catalyst for the new substrate. This synthetic enzyme has a ratio of catalytic rate (kcat) to Michaelis constant (Km) for oxaloacetate of 4.2 x 10(6)M-1 s-1, equal to that of native lactate dehydrogenase for its natural substrate, pyruvate, and a maximum velocity (250 s-1), which is double that reported for a natural malate dehydrogenase from B. stearothermophilus.

An investigation of the contribution made by the carboxylate group of an active site histidine-aspartate couple to binding and catalysis in lactate dehydrogenase.

The influence of aspartate-168 on the proton-donating and -accepting properties of histidine-195 (the active site acid/base catalyst in lactate dehydrogenase) was evaluated by use of site-directed mutagenesis to change the residue to asparagine and to alanine. Despite the fact that asparagine could form a hydrogen bond to histidine while alanine could not, the two mutant enzymes have closely similar catalytic and ligand-binding properties. Both bind pyruvate and its analogue (oxamate) 200 times more weakly than the wild-type enzyme but show little disruption in their binding of lactate and its unreactive analogue, trifluorolactate. Neither mutation alters the binding of coenzymes (NADH and NAD+) or the pK of the histidine-195 residue in the enzyme-coenzyme complex. We conclude that a strong histidine-aspartate interaction is only formed when both coenzyme and substrate are bound. Deletion of the negative charge of aspartate shifts the equilibrium between enzyme-NADH-pyruvate (protonated histidine) and enzyme-NAD+-lactate (unprotonated histidine) toward the latter. In contrast to the wild-type enzyme, the rate of catalysis in both directions in the mutants is limited by a slow hydride ion transfer step.

Rational construction of a 2-hydroxyacid dehydrogenase with new substrate specificity.

Using site-directed mutagenesis on the lactate dehydrogenase gene from Bacillus stearothermophilus, three amino acid substitutions have been made at sites in the enzyme which we suggest in part determine specificity toward different hydroxyacids (R-CHOH-COOH). To change the preferred substrates from the pyruvate/lactate pair (R = -CH3) to the oxaloacetate/malate pair (R = -CH2-COO-), the volume of the active site was increased (thr 246----gly), an acid was neutralized (asp-197----asn) and a base was introduced (gln-102 - greater than arg). The wild type enzyme has a catalytic specificity for pyruvate over oxaloacetate of 1000 whereas the triple mutant has a specificity for oxaloacetate over pyruvate of 500. Despite the severity and extent of these active site alterations, the malate dehydrogenase so produced retains a reasonably fast catalytic rate constant (20 s-1 for oxaloacetate reduction) and is still allosterically controlled by fructose-1,6-bisphosphate.