Time-varying microplastic contributions of a large urban and industrial area to river sediments.

The quantification of microplastic (MP) pollution in rivers is often constrained by a lack of historical data on a multi-decadal scale, which hinders the evaluation of public policies. In this study, MP contents and trends were analyzed in dated sediment cores sampled upstream and downstream of a large metropolis, in environmental deposits that exhibited consistent sedimentation patterns from the 1980s to 2021. After a thorough sedimentological analysis, MPs were quantified in samples by micro Fourier Transform InfraRed spectroscopy (µFTIR imaging) and a density separation and organic matter digestion procedure. Microplastics recorded in the upstream core are relatively ubiquitous all along the dated sequence. The results also confirmed a sever increase of microplastics levels in the downstream core, by one order of magnitude, and an increase of polymer types. Polypropylene, polyethylene, and polystyrene represent ubiquitous contamination and were predominant at the two stations, whereas polyvinyl chloride and polytetrafluoroethylene were suspected to be abundant at the downstream station, but were not detected at the upstream station. Their presence could be linked to local contamination from specific industrial sources that manufactured and utilized these polymers. Surprisingly, in the downstream station sediment has recorded a relative improvement in polymers associated with industrial sources since the 2000s and, to a lesser extent, for ubiquitous ones since the 2010s. This trend of mitigation diverges from that of global assessments, that assume uncontrolled MP pollution, and suggest that European Union wastewater policy and regulation on industrial discharges have positively influenced water quality, and certainly also on MPs. However, the accumulation of microplastics remains high in recent deposits and raises the emerging concern of the long-term management of these reservoirs.

Trajectories of technogenic tritium in the Rhône River (France).

Tritium is a radioisotope of hydrogen with a half-life of 12.32 years and was used for its luminescent properties by the watchmaking industry from 1962 to the 2008. Tritiated luminescent salts were integrated in the paints applied on the index and dial of watches and clocks. French and Swiss watchmaking workshops used more than 28 000 TBq of tritium over this period of time and produced almost 350 million watches. Despite the end of tritiated salts use in watchmaking workshops in 1992 in France and 2008 in Switzerland, high level of organically bound tritium (OBT) are still observed in sediments of the Rhône River downstream the Lake Geneva. Contamination of the Rhône River by tritiated hot particles since 1962 up to nowadays remains poorly documented. In order to assess the long term behavior and fate of technogenic tritium in this river and its trajectories in the river system, two sediment cores were collected at the upstream (UC) and downstream (DC) part of the Rhône River in France and OBT contents were determined. For both sedimentary cores, maximum OBT contents were registered over the 1980s when tritium was intensively used by watchmaking industries. These residual OBT contents are 1 000 to 10 000 fold higher than current natural background levels in riverine sediments. The OBT contents progressively decreased since 1989 with close effective half-life in upstream and downstream area (5 ± 2 years). The OBT contents were lower in DC than in UC due to the dilution by uncontaminated sediments delivered by tributaries not affected by the watchmaking industries. Trajectories analysis indicates that the resiliency of the Rhône River system in regards to this contamination would be reached in 14-70 years and in 14-28 years respectively for the upstream and downstream part of the river.

Ecotoxicological characterisation of sediments from stormwater retention basins.

Retention-detention basins are important structures for managing stormwater. However, their long-term operation raises the problem of managing the sediments they accumulate. Potential uses for such sediments have been envisaged, but each sediment must be characterised beforehand to verify its harmlessness. In this paper we address this issue through the development of a battery of bioassays specifically adapted to such sediments. We tested the method on samples taken from four retention basins in the region of Lyon (France). This battery focuses on the toxic effects linked to both the solid phase (ostracod and Microtox(®) solid-phase tests) and the liquid-phase (interstitial water) of sediments (rotifer and Microtox(®) liquid-phase tests). The results obtained permit the sorting of sediments presenting little toxicity, and which could therefore be potentially exploitable, from those from more polluted areas presenting higher toxicity that limits their use.

Influences on the establishment and dominance of vegetation in stormwater infiltration basins.

Infiltration basins are widely used in urban environments as a technique for managing and reducing the volume of stormwater. These basins can be spontaneously colonized by wild plants, which can be used as bioindicators of edaphic characteristics. As the basins are anthropogenic environments, the description of plant biodiversity allows the determination of which species colonize such environments and identification of the relationships between plants, basin type and operation. Nineteen infiltration basins were selected according to their catchment types (industrial, urban, agricultural). The dominant species were identified and sampled. Rumex sp., Taraxacum sp. and Artemisia sp. are the three types most represented (88, 61 and 55% respectively of the basins studied). Their families and their respective orders are those most commonly found (Caryophyllales, Asterales and Polygonaceae, Asteraceae). Poaceae is the family grouping with the largest number of different species (11). Although each species occupies only 1 or 2 basins, plants of this family occupy 61% of the basins. Although the catchment characteristics of the 19 basins do not play a direct role in the diversity of plant families, they can influence the presence or absence of certain species. Thus, these plants can be used as bio-indicators of basin soil and operating characteristics, such as sediment depths, inundation frequency and duration.

Temporal evolution of urban wet weather pollution: analysis of PCB and PAH in sediment cores from Lake Bourget, France.

In order to evaluate the historical impact of urban stormwater runoff on a lacustrine environment, eight sediment cores were collected in October 2006 in Lake Bourget (Savoie, France). Sediment samples were analysed for polycyclic aromatic hydrocarbons (PAH) and polychlorobyphenyls (PCB) in order to correlate the vertical profiles of contamination and the evolution of the urbanisation on the watershed for the last 100 years. Overall, we observe that vertical profiles of PCB and PAH concentrations in Lake Bourget are showing a downward trend, probably resulting from the pollution control measures. Concentrations of PCB and PAH measured in surface sediments are approximately 5-10 fold less than maximal concentrations found in the cores. Maximal PAH concentrations were found at the bottom of the cores ( approximately 40 cm) which approximately correspond to the beginning of the 20th century. Maximal PCB concentrations measured in cores L5 and L6 are respectively 850 and 790 microg/g dw (dryweight). The peak of PCB corresponds to the maximum of PCB production and consumption in the 1970s. In surface sediments total PCB concentrations range between 47 and 79 microg/kg dw. Those concentrations are particularly high compared to other values measured in lake sediments and highlight the problem of a local source of PCB contamination in the watershed. General trends were observed, yet the part of urban stormwater runoff in the total contamination could not be determined.

Can geotextiles modify the transfer of heavy metals transported by stormwater in infiltration basins?

Geotextiles are fibrous materials increasingly employed for the design of infiltration basins. However, their influence on the transfer of contaminants carried by stormwater has not been fully investigated. This study, based on column leaching experiments, aims at showing the effect of geotextiles on the transfer of three heavy metals (Zn, Pb and Cd) in a reactive soil (simulating an infiltration basin at laboratory scale). This effect depends on several factors, such as type of geotextile, hydric conditions (geotextile water content), hydraulic conditions (flow-rates) and the number of geotextiles installed. In all cases, geotextiles influence heavy metal retention by modifying flow and thus regulating contact between these metals and the reactive soil.

Retention of three heavy metals (Zn, Pb, and Cd) in a calcareous soil controlled by the modification of flow with geotextiles.

Although geotextiles are increasingly employed in stormwater infiltration basins, their influence on the flow and transfer of contaminants, such as heavy metals, has not been fully investigated. Leaching column experiments were conducted to characterize the flow and transfer of three heavy metals (zinc, lead, and cadmium) in a calcareous soil with and without geotextiles under steady-state flow and close to saturation forthe soil. The influence of geotextiles was characterized for two types of geotextiles (needlepunched and thermosealed) and for two different initial saturation degrees for the needlepunched geotextile. The main results showed that, when placed wet, the needlepunched geotextile had no influence. When placed dry, it homogenized the flow in its surroundings and thus allowed better contact between heavy metals and the reactive soil, resulting in an increase of their retention. The thermosealed geotextile, placed dry, homogenized the flow and increased retention over a larger area, resulting in optimal global retention. In conclusion, geotextiles could be used in infiltration basins, provided that their effect on both flow and heavy metal retention is optimized by appropriate design--choice of geotextiles--and appropriate monitoring--control of hydric conditions.

A 300 year history of lead contamination in northern French Alps reconstructed from distant lake sediment records.

Lead concentrations and isotopic ratios were measured along two well-dated sediment cores from two distant lakes: Anterne (2100 m a.s.l.) and Le Bourget (270 m a.s.l.), submitted to low and high direct human impact and covering the last 250 and 600 years, respectively. The measurement of lead in old sediment samples (>3000 BP) permits, in using mixing-models, the determination of lead concentration, flux and isotopic composition of purely anthropogenic origin. We thus show that since ca. 1800 AD the regional increase in lead contamination was mostly driven by coal consumption ((206)Pb/(207)Pb approximately 1.17-1.19; (206)Pb/(204)Pb approximately 18.3-18.6), which peaks around 1915 AD. The increasing usage of leaded gasoline, introduced in the 1920s, was recorded in both lakes by increasing Pb concentrations and decreasing Pb isotope ratios. A peak around 1970 ((206)Pb/(207)Pb approximately 1.13-1.16; (206)Pb/(204)Pb approximately 17.6-18.0) corresponds to the worldwide recorded leaded gasoline maximum of consumption. The 1973 oil crisis is characterised by a drastic drop of lead fluxes in both lakes (from approximately 35 to <20 mg cm(-2) yr(-1)). In the late 1980s, environmental policies made the Lake Anterne flux drop to pre-1900 values (<10 mg cm(-2) yr(-1)) while Lake Le Bourget is always submitted to an important flux (approximately 25 mg cm(-2) yr(-1)). The good match of our distant records, together and with a previously established series in an ice core from Mont Blanc, provides confidence in the use of sediments as archives of lead contamination. The integration of the Mont Blanc ice core results from Rosman et al. with our data highlights, from 1990 onward, a decoupling in lead sources between the high elevation sites (Lake Anterne and Mont Blanc ice core), submitted to a mixture of long-distance and regional contamination and the low elevation site (Lake Le Bourget), where regional contamination is predominant.

Implementation of a monitoring system to measure impact of stormwater runoff infiltration.

Stormwater infiltration is a drainage mode, which is more and more used in urban areas in France. Given the characteristics of urban surfaces, and especially the loads of various pollutants contained in stormwater, it is important to assess the impact of stormwater infiltration systems on soil and groundwater by carrying out field experiments. The main difficulty is due to the complexity of the system observed and the need of multidisciplinary approaches. Another difficulty is that measurements are carried out in situ, in an uncontrolled environment submitted to quantitatively and qualitatively highly variable interferences. Very long term monitoring is needed to get representative results. In order to contribute to solve these problems, the OTHU project has recently been launched in Lyon (France). One of its key action concerns a long-term (10 years) experiment on an infiltration basin specifically rehabilitated for measurements and operational drainage issues. This paper presents the experimental site, the objectives of the project and the way the monitoring process has been built according to the various disciplines involved (biology, ecology, hydrology, chemistry and soil sciences) and to the will of assessing all the uncertainties in the measurement process.