Spectrum collapse in a 7-core Yb-doped fiber laser with an array of fs-inscribed fiber Bragg gratings.

Femtosecond inscription of fiber Bragg gratings (FBGs) in each core of a cladding-pumped seven-core Yb-doped fiber enables efficient (≈70%) 1064-nm lasing in a robust all-fiber scheme with ≈33 W power, nearly the same for uncoupled and coupled cores. However, the output spectrum is quite different: without coupling, seven individual lines corresponding to the in-core FBG reflection spectra sum up into a broad (0.22 nm) total spectrum, whereas the multiline spectrum collapses into a single narrow line at strong coupling. The developed model shows that the coupled-core laser generates coherent superposition of supermodes at the wavelength corresponding to the geometric mean of the individual FBG spectra, whereas the generated laser line broadens, with a power (0.04-0.12 nm) like the single-core mode of a seven-times larger effective area.

Bending induced output power concentration in a core of a 4-core Yb-doped fiber laser.

An all-fiber 4-core Yb-doped laser with a cavity formed by fiber Bragg gratings directly inscribed in each core with femtosecond laser pulses and 4% Fresnel reflection from the output fiber end face is demonstrated. It has been shown that the diameter of the active fiber winding significantly affects the power distribution between the cores, since it affects both the pump power distribution and the cross-coupling between the cores. In particular, with an active fiber winding diameter of 21 cm, the cores behave independently, and the power is distributed almost evenly over all cores. With a winding diameter of 6.5 cm, the lasing is achieved almost exclusively from one core, and a mechanism of that radiation concentration based on bending induced stress in an active multicore fiber is proposed which explains the experimental data. By analyzing the optical and radio-frequency spectra of the output laser radiation, additional details of the 4-core fiber lasing are revealed. In particular, a narrowband (several longitudinal modes) lasing with periodic linear sweeping of central wavelength in time is observed and characterized in the multicore fiber laser, for the first time to our knowledge. It is shown that crosstalk of longitudinal modes arising from different cores is greatly enhanced in the case of a strongly bent fiber.

Spatio-spectral beam control in multimode diode-pumped Raman fibre lasers via intracavity filtering and Kerr cleaning.

Multimode fibres provide a promising platform for boosting the capacity of fibre links and the output power of fibre lasers. The complex spatiotemporal dynamics of multimode beams may be controlled in spatial and temporal domains via the interplay of nonlinear, dispersive and dissipative effects. Raman nonlinearity induces beam cleanup in long graded-index fibres within a laser cavity, even for CW Stokes beams pumped by highly-multimode laser diodes (LDs). This leads to a breakthrough approach for wavelength-agile high-power lasers. However, current understanding of Raman beam cleanup is restricted to a small-signal gain regime, being not applicable to describing realistic laser operation. We solved this challenge by experimentally and theoretically studying pump-to-Stokes beam conversion in a graded-index fibre cavity. We show that random mode coupling, intracavity filtering and Kerr self-cleaning all play a decisive role for the spatio-spectral control of CW Stokes beams. Whereas the depleted LD pump radiation remains insensitive to them.

Over 400 W graded-index fiber Raman laser with brightness enhancement.

The power scaling on all-fiberized Raman fiber oscillator with brightness enhancement (BE) based on multimode graded-index (GRIN) fiber is demonstrated. Thanks to beam cleanup of GRIN fiber itself and single-mode selection properties of the fiber Bragg gratings inscribed in the center of GRIN fiber, the efficient BE is realized. For the laser cavity with single OC FBG, continuous-wave power of 334 W with an M2 value of 2.8 and BE value of 5.6 were obtained at a wavelength of 1120 nm with an optical-to-optical efficiency of 49.6%. Furthermore, the cavity reflectivity is increased by employing two OC FBGs to scale the output power up to 443 W, while the corresponding M2 is 3.5 with BE of 4.2. To our best knowledge, it is the highest power in Raman oscillator based on GRIN fiber.

Advanced distributed feedback lasers based on composite fiber heavily doped with erbium ions.

Specially designed composite heavily Er3+-doped fiber in combination with unique point-by-point inscription technology by femtosecond pulses at 1,026 nm enables formation of distributed-feedback (DFB) laser with ultra-short cavity length of 5.3 mm whose parameters are comparable and even better than those for conventional Er3+-doped fiber DFB lasers having much longer cavity. The composite fiber was fabricated by melting rare-earth doped phosphate glass in silica tube. The ultra-short DFB laser generates single-polarization single-frequency radiation at 1,550 nm with narrow linewidth (3.5 kHz) and 0.5 mW output power at 600 mW 980-nm pumping. The same fiber with conventional CW UV (244 nm) inscription technology using phase mask enables fabrication of 40-mm long DFB laser with > 18 mW output power at 3.3% pump conversion, which is a record efficiency for Er3+-doped fiber DFB lasers. The developed technologies form an advanced platform for Er3+-doped fiber DFB lasers operating around 1.55 µm with excellent output characteristics and unique practical features, in particular, the ultra-short DFB lasers are attractive for sensing applications.

2nd-order random lasing in a multimode diode-pumped graded-index fiber.

Raman lasing in a graded-index fiber (GIF) attracts now great deal of attention due to the opportunity to convert high-power multimode laser diode radiation into the Stokes wave with beam quality improvement based on the Raman clean-up effect. Here we report on the cascaded Raman generation of the 2nd Stokes order in the 1.1-km long GIF with 100-µm core directly pumped by 915-nm diodes. In the studied all-fiber scheme, the 1st Stokes order is generated at 950-954 nm in a linear cavity formed at GIF ends by two fiber Bragg gratings (FBGs) securing beam quality improvement from M2 ≈ 30 to M2 ≈ 2.3 due to special transverse structure of FBGs. The 2nd Stokes wave is generated either in linear (two FBGs) or half-open (one FBG) cavity with random distributed feedback via Rayleigh backscattering. Their comparison shows that the random lasing provides better beam quality and higher slope efficiency. Nearly diffraction limited beam (M2 ≈ 1.6) with power up to 27 W at maximum gain (996 nm), and 17 W at the detuned wavelength of 978 nm has been obtained, thus demonstrating that the 2nd-order random lasing in diode-pumped GIF with FBGs provides high-efficiency high-quality beam generation in a broad wavelength range within the Raman gain spectral profile.

Highly efficient all-fiber continuous-wave Raman graded-index fiber laser pumped by a fiber laser.

We report for the first time, to the best of our knowledge, an all-fiber Raman graded-index (GRIN) fiber laser pumped by a fiber laser. This configuration points to potential future power and brightness increases. Continuous-wave power of 135 W with an M2 value of 2.5 was obtained at a wavelength of 1081 nm with an optical-to-optical efficiency of 68%. A commercial GRIN core fiber acts as the Raman fiber in a power oscillator configuration that includes fiber Bragg gratings (FBGs) written onto the GRIN fiber. The efficiency and brightness demonstrated here are, to the best of our knowledge, the highest reported in any Raman GRIN fiber laser. A brightness enhancement of the pump beam by a factor of 5.6 is attained due to the transverse profiles of Raman gain and FBG reflection in the GRIN fiber.

Generating high-quality beam in a multimode LD-pumped all-fiber Raman laser.

We report on the first demonstration of an all-fiber CW Raman laser based on a multimode graded-index fiber directly pumped by multimode fiber-coupled laser diodes. A joint action of Raman clean-up effect and mode-selection properties of special fiber Bragg gratings inscribed in the central part of the graded-index fiber core, results in high-efficiency conversion of a multimode (M2~26) pump at 915 nm into a high-quality (M2~2.6) output beam at 954 nm. About 50 W output power has been obtained with slope efficiency of 67%. The proposed development and integration of key multimode fiber technologies opens the door to new type of LD-pumped high-power high-beam-quality fiber lasers that may operate at almost any wavelength defined by available LDs.