Acoustic radiation of subsonic jets in the vicinity of an inclined flat plate.

Acoustic measurements of turbulent jets in the vicinity of a flat plate, mimicking a neighbouring wing, were compared to results from two wavepacket-based source models previously studied in the literature: the Tailored Green's Function method, which considers the radiation of the turbulent structure in the vicinity of a semi-infinite flat plate, and the Boundary Element Method, which can represent the full geometry of the plate used in the experiments. Particular interest is given to analysing how the angle of attack of the plate (α) affects the sound radiated by an installed jet with trailing edge 6 diameters away from the nozzle and 1 diameter away from the centerline for 0° ≤ α ≤ 45°. The results herein confirm the behaviour identified by the models: the scattered acoustic field follows the rotation of the plate, shifting a silence region with negligible scattered sound, and creating regions with lower noise levels in positions that correspond to the ground for an aircraft with engines under its wings. This is further explored by means of a Mach number analysis for M = 0.5, 0.7, and 0.9, showing that this trend is present whenever trailing-edge scattering of jet disturbances is dominant in the acoustic field.

Acoustic scattering by finite composite plates.

Trailing edge scattering is a significant source of sound, and elasticity is known to decrease the radiated sound by a process involving coupled acoustic and bending waves. Most of the analysis available in the literature to deal with this problem is limited to structures of isotropic material. A numerical method is extended, based on the solution of a boundary element method with boundary conditions given by the structural problem, to account for anisotropic composite plates, restricted to symmetric laminates. These conditions are recast in terms of the vibration modes of a rectangular plate. To obtain these modes, the hierarchical finite element method is used to model an elastic flat plate. Expressions for bending waves propagating in such plates are derived, and how the solution of the problem is modified to account for these effects is shown. Results show modifications in the scattered sound as a function of ply orientation and stacking sequence. Composite materials are shown to be advantageous, since laminates lead to lower acoustic scattering when compared to structurally equivalent metallic plates. This is due to a lower specific mass, leading to higher coupling between fluid and solid, and thus to more significant elasticity effects, decreasing substantially the radiated sound.

Scattering of turbulent-jet wavepackets by a swept trailing edge.

Installed jet noise is studied by means of a simplified configuration comprising a flat plate in the vicinity of a round jet. The effects of Mach number, jet-plate radial distance, and trailing-edge sweep angle are explored. Acoustic measurements are performed using a traversable 18-microphone azimuthal array, providing pressure data at 360 points on a cylindrical surface surrounding the jet-plate system. Key observations include a decrease, with increasing Mach number, of the relative level of the scattered field in comparison to the uninstalled jet; an exponential dependence of the scattered sound pressure level on the radial jet-plate separation; and considerable sideline noise reductions with increasing sweep angle, with which there is an overall reduction in acoustic efficiency. The measurements are compared with results obtained using a kinematic wavepacket source model, whose radiation is computed in two ways. A TGF for a semi-infinite flat plate is used to provide a low-order approximation of the scattering effect. Use of a more computationally intensive boundary element method provides additional precision. Good agreement between model predictions and experiment, encouraging from the perspective of low-cost prediction strategies, demonstrates that the models comprise the essential sound generation mechanisms.