Implant selection for successful reverse total shoulder arthroplasty.

Reverse total shoulder arthroplasty (RTSA) emerged as a new concept of arthroplasty that does not restore normal anatomy but does restore function. It enables the function of the torn rotator cuff to be performed by the deltoid and shows encouraging clinical outcomes. Since its introduction, various modifications have been designed to improve the outcome of the RTSA. From the original cemented baseplate with peg or keel, a cementless baseplate was designed that could be fixed with central and peripheral screws. In addition, a modular-type glenoid component enabled easier revision options. For the humeral component, the initial design was an inlay type of long stem with cemented fixation. However, loss of bone stock from the cemented stem hindered revision surgery. Therefore, a cementless design was introduced with a firm metaphyseal fixation. Furthermore, to prevent complications such as scapular notching, the concept of lateralization emerged. Lateralization helped to maintain normal shoulder contour and better rotator cuff function for improved external/internal rotation power, but excessive lateralization yielded problems such as subacromial notching. Therefore, for patients with pseudoparalysis or with risk of subacromial notching, a medial eccentric tray option can be used for distalization and reduced lateralization of the center of rotation. In summary, it is important that surgeons understand the characteristics of each implant in the various options for RTSA. Furthermore, through preoperative evaluation of patients, surgeons can choose the implant option that will lead to the best outcomes after RTSA.

Risk factors for hardware-related complications after extra-articular distal humerus fracture fixation using an anatomical locking plate.

PURPOSE: We aimed to identify the incidence and risk factors of hardware-related complications in patients treated with anatomical locking plate fixation for extra-articular distal humerus fractures. METHODS: From 2013 to 2020, patients with extra-articular distal humerus fractures who underwent open reduction and internal fixation with an extra-articular distal humerus locking plate (EADHP) were retrospectively reviewed and categorized according to the presence/absence of hardware-related complications. Hardware-related complications were defined as the occurrence of skin prominence on the plate and discomfort in activities of daily living. Patient demographics, the lateral condylar angle, lateral body length, shaft-condylar angle of the humerus, and plate length were analyzed. RESULTS: Of the 29 patients, 10 (34%) did not develop hardware-related complications (group A), whereas 19 (66%) did (group B). Patient demographics did not differ between the groups. However, the number of patients who underwent hardware removal was significantly greater in group B (16/19) than in group A (4/10; p = 0.032). Radiologic assessment revealed no significant difference in the lateral condylar or shaft-condylar angle. However, the lateral body length was greater in group A than in group B (44.5 ± 4.8 vs. 39.5 ± 3.7, p = 0.007). The plate length significantly differed between the groups. Twelve of 19 (63%) patients in group B received short-hole plates (six holes), while nine of ten (90%) patients in group A received long-hole plates (eight holes). In the multivariable analysis, the lateral body length of the distal humerus (p = 0.047, odds ratio = 0.734, 95% confidence interval: 0.542-0.996) and plate length (p = 0.036, odds ratio = 0.076, 95% confidence interval: 0.542-0.996) were associated with hardware-related complications. CONCLUSIONS: Most patients developed hardware-related complications, particularly with short plates, mainly because of the narrow lateral body length of the distal humerus. Surgeons should be careful to secure EADHP in the appropriate position, especially when short plates are used in patients with narrow lateral body length.

An Increased Lateral Femoral Condyle Ratio Is an Important Risk Factor for a Medial Meniscus Ramp Lesion Including Red-Red Zone Tear.

PURPOSE: This study aimed to determine radiological findings associated with ramp lesions in knees with anterior cruciate ligament (ACL) injury. METHODS: This study included the primary ACL reconstructions from June 2011 to March 2019. The exclusion criteria were combined fractures and multiligament injuries. Patients were categorized based on arthroscopy-confirmed presence of ramp lesions, which was defined as a longitudinal tear around the meniscocapsular junction or red-red zone tear of medial meniscus posterior horn. Binary logistic regression analysis was performed to find the risk factors such as age, sex, body mass index, medial tibial slope, mechanical axis angle, presence of Segond fracture, and lateral femoral condyle (LFC) ratio. Additionally, receiver operating characteristic (ROC) curves and area under the ROC curve (AUC) were evaluated. RESULTS: Ramp lesions were identified in 89 (27.7%) patients among the total 321 included primary ACL reconstructions. The risk of ramp lesion was associated with increased LFC ratio (odds ratio [OR]: 62.929; 95% confidence interval [CI]: 8.473-467.351; P < .001), varus alignment >3° (OR: 5.858; 95% CI: 3.272-10.486; P < .001), and steeper medial tibial slope (OR: 1.183; 95% CI: 1.05-1.333; P = .006). The cutoff values of the LFC ratio and medial tibial slope for ramp lesions were >71% (AUC: 0.696; sensitivity: 43.82%; specificity: 91.38%; P < .001) and >12.1° (AUC: 0.643; sensitivity: 85.39%; specificity: 38.79%; P < .001), respectively. CONCLUSION: Deep posterior LFC, varus alignment, and steep medial tibial slope were associated factors for ramp lesions in knees with ACL injury. In patients with ACL injury who show the above-mentioned radiographic findings, careful assessment and suspicion for ramp lesions should be considered. STUDY DESIGN: Level III, retrospective cross-sectional study.

Outcomes of arthroscopic femoroplasty in patients with cam lesions: Minimum 2-year follow-up.

PURPOSE: Successful arthroscopic femoroplasty in patients with cam lesions have been reported in Western countries in the last two decades. However, the outcomes after arthroscopic femoroplasty in Asia have thus far only been reported in patients with borderline dysplasia and in the military population. This retrospective study was designed to evaluate the short-term clinical outcomes and radiologic outcomes after hip arthroscopy in patients with cam-type femoroacetabular impingement (FAI) at a minimum postoperative follow-up of 2 years. METHODS: From January 2013 to December 2016, 204 hip arthroscopy procedures were performed. Of these cases, 62 patients (73 hips) underwent hip arthroscopy for cam-type FAI. RESULTS: Of the 73 hips, 65 (89.0%) achieved gratified reduction or elimination of preoperative pain. The clinical outcomes showed improvement in scores from before surgery to the last follow-up: 67.1 ± 15.0 to 90.2 ± 6.3 for the modified Harris hip score (p < 0.001), 4.7 ± 2.5 to 7.1 ± 1.4 for the University of California Los Angeles score (p < 0.001), and 7.4 ± 1.9 to 1.8 ± 1.5 for the visual analog scale score (p < 0.001). In radiologic assessments, significant improvement was observed in the alpha angle from a mean 60.9° to 49.5° (p < 0.001) and in the head-neck offset from a mean of 3.3 mm to 6.3 mm (p < 0.001). Of the 73 hips, 65 (89.0%) achieved satisfactory reduction or elimination of preoperative pain. In subgroup analysis for the sufficiency of femoroplasty (alpha angle < 55°), the clinical outcomes were not different between the two groups. CONCLUSION: Arthroscopic femoroplasty resulted in an 89% satisfaction at the 2-year follow-up. Therefore, hip arthroscopic femoroplasty might be an excellent alternative to open surgery and offers a greater probability of good to excellent results.

Comparison of clinical outcomes between arthroscopic debridement and conservative treatment of primary adhesive capsulitis of the hip.

PURPOSE: The purpose of this study was to assess the clinical outcomes and change of ROM between patients with adhesive capsulitis of the hip (ACH) who underwent arthroscopic treatment and those who underwent conservative treatment at a minimum follow-up of two years. METHODS: From 2010 to 2017, 35 hips (32 patients, 10 men and 22 women) diagnosed with primary ACH were enrolled and followed up for a minimum of two years. Arthroscopic surgery was performed in 17 patients (20 hips, operation group), and conservative treatment was performed in 15 patients (15 hips, control group). Outcomes were measured with the visual analogue scale (VAS), University of California, Los Angeles (UCLA) activity scale, modified Harris hip score (mHHS), and degree of range of motion (ROM). RESULTS: The patients in the operation group were younger than those in the control group (mean age, 36.6 vs 46.2, p = 0.032). The VAS scores were significantly lower in the operation group than in the control group at two weeks, six weeks, and 24 months of follow-up. Moreover, the operation group showed a trend of better values of UCLA and mHHS, with no statistical differences during the entire follow-up; these patients also achieved greater improvements of external rotation at six weeks' evaluation. CONCLUSION: The patients with ACH in the two groups shows improvement of pain, UCLA scale, mHHS, and ROM at a minimum two year follow-up. Based on this study, we do not routinely recommend surgical treatment. However, patients with intractable pain and severe limitation of ROM are possible candidate of arthroscopic capsular release.

The correlation between shape of the sigmoid notch of the distal radius and the risk of triangular fibrocartilage complex foveal tear.

AIMS: The aim of this study was to analyze the association between the shape of the distal radius sigmoid notch and triangular fibrocartilage complex (TFCC) foveal tear. METHODS: Between 2013 and 2018, patients were retrospectively recruited in two different groups. The patient group comprised individuals who underwent arthroscopic transosseous TFCC foveal repair for foveal tear of the wrist. The control group comprised individuals presenting with various diseases around wrist not affecting the TFCC. The study recruited 176 patients (58 patients, 118 controls). The sigmoid notch shape was classified into four types (flat-face, C-, S-, and ski-slope types) and three radiological parameters related to the sigmoid notch (namely, the radius curvature, depth, and version angle) were measured. The association of radiological parameters and sigmoid notch types with the TFCC foveal tear was investigated in univariate and multivariate analyses. Receiver operating characteristic curves were used to estimate a cut-off for any statistically significant variables. RESULTS: Univariate analysis showed that the flat-face type was more prevalent in the patients than in the control group (43% vs 21%; p = 0.002), while the C-type was lower in the patients than in the control group (3% vs 17%; p = 0.011). The depth and version angle of sigmoid notch showed a negative association with the TFCC foveal tear in the multivariate analysis (depth: odds ratio (OR) 0.380; p = 0.037; version angle: OR 0.896; p = 0.033). Estimated cut-off values were 1.34 mm for the depth (area under the curve (AUC) = 0.725) and 10.45° for the version angle (AUC = 0.726). CONCLUSION: The proportion of flat-face sigmoid notch type was greater in the patient group than in the control group. The depth and version angle of sigmoid notch were negatively associated with TFCC foveal injury. Cite this article: Bone Joint J 2020;102-B(6):749-754.