A Dual-Band Polarization-Insensitive Frequency Selective Surface for Electromagnetic Shielding Applications.

This paper presents a novel polarization-insensitive dual-band frequency-selective surface (FSS)-based electromagnetic shield. The miniaturized FSS unit cell consists of a modified Jerusalem crossed loop and a corner-modified square loop. These FSS elements are arranged in a co-planner configuration over a single-layer Rogers 5880 substrate and simultaneously offer effective shielding in the X- and Ku-bands. Moreover, the FSS manifests polarization-independent and angularly stable band-reject filter characteristics over various oblique angles of incidence for both the TE and TM polarizations with virtuous attenuation at both resonances. In addition, the FSS structure is modelled into an equivalent lumped circuit to better analyze the phenomenon of EM wave suppression. A finite prototype of FSS is fabricated and tested. The simulated and measured results are in good agreement, thus making it a potential candidate for RF shielding/isolation applications.

A Deployable and Cost-Effective Kirigami Antenna for Sub-6 GHz MIMO Applications.

In this work, a low-cost, deployable, integratable, and easy-to-fabricate multiple-input multiple-output (MIMO) Kirigami antenna is proposed for sub-6 GHz applications. The proposed MIMO antenna is inspired by Kirigami art, which consists of four radiating and parasitic elements. The radiating and parasitic elements are composed of a rectangular stub. These elements are placed in such a way that they can provide polarization diversity. The proposed MIMO antenna is designed and fabricated using a soft printed board material called flexible copper-clad laminate (FCCL). It is observed from the results that the proposed MIMO antenna resonates in the 2.5 GHz frequency band, with a 10 dB reflection coefficient bandwidth of 860 MHz ranging from 2.19 to 3.05 GHz. It is worthwhile to mention that the isolation between adjacent radiating elements is higher than 15 dB. In addition, the peak realized gain of the MIMO antenna is around 11 dBi, and the total efficiency is more than 90% within the band of interest. Moreover, the envelope correlation coefficient (ECC) is noted to be less than 0.003, and the channel capacity is ≥17 bps/Hz. To verify the simulated results, a prototype was fabricated, and excellent agreement between the measured and computed results was observed. By observing the performance attributes of the proposed design, it can be said that there are many applications in which this antenna can be adopted. Because of its low profile, it can be used in 5G small-cell mobile MIMO base stations, autonomous light mobility vehicles, and other applications.

Rotational Doppler effect by space-time-coding metasurfaces for nonreciprocal electromagnetic isolation.

Metasurfaces are artificial structures that can arbitrarily manipulate electromagnetic (EM) wavefronts. We propose a nonreciprocal EM isolating surface based on space-time-coding metasurfaces that generates orbital angular momentum (OAM)-carrying beams with electronic rotational Doppler effect. The region between two parallel 1-bit programmable space-time-coding OAM metasurfaces, one each for frequency and OAM order up-conversion and down-conversion, induce rotational Doppler shifts from opposing incident directions. An intermediate frequency-selective surface with highpass characteristics transmits the up-conversion signals and blocks the down-conversion signals. Hence, the EM waves are sensitive to illumination direction, exhibiting EM isolation responses, and the incident waves are only transmitted unidirectionally.

Experimental demonstration of a time-domain digital-coding metasurface for a Doppler cloak.

By generating an artificial Doppler shift, a Doppler cloak can compensate for the Doppler shift from a moving object. An object covered by a Doppler cloak will be detected as a static object, even if it is actually moving. Herein, we experimentally demonstrate the Doppler cloak in a radar system using a time-domain digital-coding metasurface. We theoretically illustrate an active metasurface with a modulated reflection phase that can imitate the motion of moving, thereby generating an artificial Doppler shift for a Doppler cloak. Moreover, a reflective metasurface composed of voltage-controlled varactor diodes with a 3-bit reflection phase was designed and fabricated. Finally, we experimentally demonstrate that an artificial Doppler shift for a Doppler cloak is obtained from the proposed metasurface using a discrete time-varying bias voltage. Simulation and measurement results show that the proposed time-domain digital-coding metasurface can cancel the Doppler shift and serve as a Doppler cloak. The proposed metasurface may have potential applications in a Doppler radar illusion, Doppler cancellation in vehicle-to-vehicle communications, and wireless communications.

Design and experimental demonstration of Doppler cloak from spatiotemporally modulated metamaterials based on rotational Doppler effect.

Recently, spatiotemporally modulated metamaterial has been theoretically demonstrated for the design of Doppler cloak, a technique used to cloak the motion of moving objects from the observer by compensating for the Doppler shift. Linear Doppler effect has an angular counterpart, i.e., the rotational Doppler effect, which can be observed by the orbital angular momentum (OAM) of light scattered from a spinning object. In this work, we predict that the spatiotemporally modulated metamaterial has its angular equivalent phenomenon. We therefore propose a technique to observe the rotational Doppler effect by cylindrical spatiotemporally modulated metamaterial. Conversely, such a metamaterial is able to cloak the Doppler shift associated with linear motion by generating an opposite rotational Doppler shift. This novel concept is theoretically analyzed, and a conceptual design by spatiotemporally modulating the permittivity of a voltage-controlled OAM ferroelectric reflector is demonstrated by theoretical calculation and numerical simulation. Finally, a Doppler cloak is experimentally demonstrated by a spinning OAM metasurface in radar system, which the spatiotemporal reflection phase are mechanically modulated. Our work presented in this paper may pave the way for new directions of OAM carrying beams and science of cloaking, and also explore the potential applications of tunable materials and metasurfaces.

Spoof Surface Plasmon Polaritons Power Divider with large Isolation.

Periodic corrugated metal structure is designed to support and propagate spoof surface plasmon polaritons (SSPPs) wave in the microwave frequencies. In this paper, firstly a plasmonic waveguide consisting of oval-ring shaped cells is proposed with the performance of high transmission efficiency in a wide frequency range. The coplanar waveguides (CPWs) with 50 Ω impedance are adopted to feed the energies or extract signals at both ends of the plasmonic waveguide. Then a well-isolated power divider is constructed based on the SSPPs waveguides aiming to equally split the energy of the SSPPs wave into two equal parts. The stepped-impedances are co-designed with the three input/output ports of the power divider to achieve the impedance-matching between the SSPPs waveguides and the coplanar waveguides. Besides, a single resistor is placed in the middle of two symmetrical half oval-rings to realize the isolation between the two output ports over the spectrum of 4.5-7.5 GHz. Finally, both plasmonic waveguide and the power divider are fabricated and tested to verify the predicted characteristics.