The influence of screw omission on construction stiffness and bone surface strain in the application of bone plates to cadaveric bone.

Biological fracture repair is becoming an increasingly popular means of fracture fixation. This technique involves a reduction in the amount of surgical trauma thereby preserving vascular supply and soft-tissue integrity combined with the implantation of less hardware. The aim is the stimulation of callus formation as the means by which fracture union occurs. This paper describes the mechanical effect of the symmetrical omission of screws on construction stiffness and bone surface strain following the application of bone plates to cadaveric bone. The influence of the pattern of screw omission was evaluated in both intact and osteotomized bone specimens. The application of bone plates using certain patterns of screw omission did not significantly effect the stiffness of the final construction whilst inherent bone surface strain was increased. It was concluded that the omission of screws in certain defined patterns for a given plate-bone construction may meet the criteria for 'biological fixation'. There was no apparent deleterious effect on structural stiffness following the omission of 40% of the total screw complement from a plate-bone construction.

Anterior vertebral body screw pullout testing. A comparison of Zeilke, Kaneda, Universal Spine System, and Universal Spine System with pullout-resistant nut.

STUDY DESIGN: A biomechanical study of pullout of anteriorly implanted screws in cadaveric vertebral bodies. OBJECTIVES: To investigate and compare the pullout strength of the Zielke, Kaneda, Universal Spine System (USS) pedicle screw, and USS pedicle screw with a new pullout-resistant nut. SUMMARY OF BACKGROUND DATA: A common problem with anterior purchase regardless of the implant system is screw pullout at the proximal and distal ends of multilevel constructs. There is limited information on a solution to this problem. METHODS: The L1 to L4 vertebral bodies from four cadavers had one each of Zielke and Kaneda pedicle screws (Acromed Corp., Cleveland, OH), USS pedicle screw (Synthes Spine, Paoli, PA), and USS pedicle screw with pullout-resistant nut implanted transversely across the center of the vertebral body with bicortical purchase in a similar fashion as would be used clinically. The screws were extracted using a servohydraulic material testing system. The maximum axial forces were recorded. RESULTS: The Zielke and Kaneda screws had no significant difference in mean pullout strength (P = 0.542). The USS screw alone was less strong (P = 0.009). The USS screw and pullout-resistant nut increased the pullout strength by twofold (P = 0.00006). In the screw pullout tests, the mode of failure was at the screw thread's interface. The USS screw and pullout-resistant nut failed by imploding the body around the nut. With the USS screw and pullout-resistant nut, the pullout strength was determined by the compressive strength of the bone. CONCLUSIONS: The addition of a pullout-resistant nut to an anterior vertebral body screw improves the pullout strength by twofold and changes the mode of failure to rely ultimately on the inherent vertebral body strength rather than the screw's characteristics. The addition of a pullout-resistant nut may be applicable to multilevel implant constructs to prevent screw pullout at the top and bottom.

Stiffness of trabecular bone of the tibial plateau in patients with rheumatoid arthritis of the knee.

Stiffness of subchondral proximal tibial trabecular bone is a factor in the stability of prostheses implanted into that bone. The stiffness of trabecular bone in osteoarthritis (OA) has been documented. Trabecular bone in rheumatoid arthritis (RA) is osteopenic in numerous sites and morphologically abnormal in the proximal tibia. Reliable data on proximal tibial bone in RA are lacking, although 1 study failed to identify abnormalities. The purposes of this study were (1) to document the stiffness of the proximal tibial cancellous bone in patients with RA, (2) to determine the effect of angular deformity on bone stiffness in rheumatoid patients, and (3) to compare RA stiffness values with those in published reports for OA. Fifteen tibial plateau were obtained from patients with RA during surgery. Each plateau was horizontally seated in a mold and covered with cement. The plateau was divided into 6 regions, which were used to facilitate comparison between specimens and the existing literature. Indentation tests were conducted with a 4-mm-diameter cylindrical indentor controlled by an MTS machine. The indentor descended at a rate of 2 mm/min to a maximum depth of 1.0 mm; load and displacement data were digitally recorded. Stiffness was calculated from the slope of the linear region of the curve using best-fit linear regression. Where varus deformity was present, stiffness in the medial plateau was higher overall than for the other compartment; whereas in the case of valgus deformity, stiffness of the lateral side was significantly higher (P < .05 for each observation). In comparison to older normal specimens, both the medial compartment of the varus RA specimens (P < .01) and the posterolateral compartment of the valgus RA specimens (P < .01) had significantly lower stiffness. Comparison with OA specimens showed that in varus RA, the posteromedial region had significantly lower stiffness than in varus OA at the same site (P < .01). In valgus RA, the lateral region had significantly lower stiffness than in valgus OA at the same site (P < .01). The mean stiffness ratio of the valgus RA was significantly (P < .01) altered from normal, and for the varus RA, it was significantly (P < .01) different from normal posteriorly. The stiffness ratios for the varus RA were significantly (P < .01) different from those for varus OA; there was no difference between valgus RA and valgus OA. It is concluded that RA affected bone has significantly lower stiffness than normal and osteoarthritic bone. The loaded plateau is stiffer than the unloaded plateau in angular deformity, but is still less stiff than normal bone and osteoarthritic plateaus with corresponding deformities.

Insertional torque and pull-out strengths of conical and cylindrical pedicle screws in cadaveric bone.

STUDY DESIGN: Insertion torque and pull-out strengths of conical and cylindrical pedicle screws were compared in human cadaveric vertebral bodies. OBJECTIVES: To compare the performance of the conical design with the cylindrical design, and to determine whether insertional torque correlates with pull-out strength. SUMMARY OF BACKGROUND DATA: A tapered pedicle screw design may lessen the likelihood of implant failure. Its effect on thread purchase is not known. Previous studies of cylindrical designs on the relation between insertion torque and pull-out strength have been conducted in bovine and synthetic bone. METHODS: Seventy-eight pedicles were assigned randomly to one of the following pedicle screw: Texas Scottish Rite Hospital (Sofamor-Danek, Memphis, TN), Steffee VSP (Acromed, Cleveland, OH), Diapason (Dimso, Paris, France), AO Schanz (Synthes, Paoli, PA), or Synthes USS (Synthes, Paoli, PA). Pedicle screws were inserted with a torque screwdriver. Each screw was extracted axially from the pedicle at a rate of 1.0 mm/sec until failure using an MTS machine (Bionix 858, Minneapolis, MN). Force data were recorded. RESULTS: The conical design had the highest insertion torque. There were no significant differences in pull-out between any of the screw types. Correlation between insertional torque and pull-out strength was statistically significant only with the Texas Scottish Rite Hospital and Steffee VSP in L4 and AO Schanz in L5. CONCLUSIONS: A conical screw profile increases insertion torque, although insertional torque is not a reliable predictor of pull-out strength in cadaveric bone. Screw profile (with similar dimensions) has little effect on straight axial pull-out strengths in cadaveric bone.

The strength of iliosacral lag screws and transiliac bars in the fixation of vertically unstable pelvic injuries with sacral fractures.

This study compares the relative strengths of iliosacral lag screws and transiliac bars in the fixation of vertically unstable pelvic injuries with sacral fractures. A vertical sacral fracture was artificially induced by vertical loading in eight pelvises from cadavers, which were then fixed with two 6.5 mm iliosacral lag screws or two 6.4 mm transiliac bars. The pelvises were then loaded again to failure. The mean strength of iliosacral lag screw fixation was 819 newtons and for transiliac bars it was 1066 newtons, but the study was too small for the difference to be judged as statistically significant. Various advantages and disadvantages of each method of fixation are discussed.

Biomechanical analysis of hemipelvic deformation after corticospongious bone graft harvest from the posterior iliac crest.

STUDY DESIGN: The stiffness of the hemipelvis during simulated physiologic loading and the bone deformation in the remaining posterior ilium after the harvest of increasing sizes of corticospongious bone graft were compared with values in intact bone. OBJECTIVES: To quantify the biomechanical effects of the removal of bone grafts from the posterior ilium and to relate the size of graft removed to the stiffness of the hemipelvis and deformation of the remaining bone. SUMMARY OF BACKGROUND DATA: Bone fractures and pelvic instability have been reported to complicate graft harvest from the posterior iliac crest. There is no quantitative data relating graft size to the mechanical properties of the remaining ilium. METHODS: Seven cadaveric hemipelves were loaded with a materials testing machine through the superior sacrum while supported at the acetabulum and stabilized with a cable fixed to the ilium. Force and displacement histories and deformation in the greater sciatic notch were recorded for the intact bone and after removal of corticospongious bone graft in 1.5-cm increments from the posterior iliac crest. RESULTS: If the length of the removed corticospongious bone graft exceeded 3.0 cm, the stiffness of the posterior pelvic ring decreased, and deformation in the remaining bone increased substantially. CONCLUSIONS: Removal or bone graft in excess of 3 cm from the posterior ilium increases the risk of iatrogenic fatigue fracture.

Health insurance: impact on hospitalization rates for asthma.

Recent studies have shown that hospitalization rates for asthma have increased. Data from the 1991 National Health Interview Survey were analyzed to show the relationship between insured and uninsured persons who self-identify as having asthma. Having health insurance was found to decrease the number of hospitalizations associated with asthma, particularly at low and high income levels. A collateral finding demonstrated an inverse relationship between doctor visits and hospitalizations. This suggests that having health insurance will result in patients' seeking physician contact for preventive care; this leads to better control, infrequent hospitalizations, and, ultimately, decreased health care costs.