Acoustics@Home: Laboratories and student-led projects conducted for an undergraduate engineering experimentation course during the COVID-19 pandemic.

Hands-on, project-based learning was difficult to achieve in online classes during the COVID-19 pandemic. The Engineering Experimentation course at Cooper Union teaches third-year mechanical engineering students practical experimental skills to measure physical phenomenon, which typically requires in-person laboratory classes. In response to COVID, a low-cost, at-home laboratory kit was devised to give students tools to conduct experiments. The kit included a microcontroller acting as a data-acquisition device and custom software to facilitate data transfer. A speed of sound laboratory was designed with the kit to teach skills in data collection, signal processing, and error analysis. The students derived the sound speed by placing two microphones a known distance apart and measuring the time for an impulsive signal to travel from one to the other. The students reported sound speeds from 180.7-477.8 m/s in a temperature range from 273.7-315.9 K. While these reported speeds contained a large amount of error, the exercise allowed the students to learn how to account for sources of error within experiments. This paper also presents final projects designed by the students at home, an impedance tube and two Doppler shift experiments, that exhibit successful and effective low-cost solutions to demonstrate and measure acoustic phenomenon.

Automatic upper airway segmentation in static and dynamic MRI via anatomy-guided convolutional neural networks.

PURPOSE: Upper airway segmentation on MR images is a prerequisite step for quantitatively studying the anatomical structure and function of the upper airway and surrounding tissues. However, the complex variability of intensity and shape of anatomical structures and different modes of image acquisition commonly used in this application makes automatic upper airway segmentation challenging. In this paper, we develop and test a comprehensive deep learning-based segmentation system for use on MR images to address this problem. MATERIALS AND METHODS: In our study, both static and dynamic MRI data sets are utilized, including 58 axial static 3D MRI studies, 22 mid-retropalatal dynamic 2D MRI studies, 21 mid-retroglossal dynamic 2D MRI studies, 36 mid-sagittal dynamic 2D MRI studies, and 23 isotropic dynamic 3D MRI studies, involving a total of 160 subjects and over 20 000 MRI slices. Samples of static and 2D dynamic MRI data sets were randomly divided into training, validation, and test sets by an approximate ratio of 5:2:3. Considering that the variability of annotation data among 3D dynamic MRIs was greater than for other MRI data sets, we increased the ratio of training data for these data to improve the robustness of the model. We designed a unified framework consisting of the following procedures. For static MRI, a generalized region-of-interest (GROI) strategy is applied to localize the partitions of nasal cavity and other portions of upper airway in axial data sets as two separate subobjects. Subsequently, the two subobjects are segmented by two separate 2D U-Nets. The two segmentation results are combined as the whole upper airway structure. The GROI strategy is also applied to other MRI modes. To minimize false-positive and false-negative rates in the segmentation results, we employed a novel loss function based explicitly on these rates to train the segmentation networks. An inter-reader study is conducted to test the performance of our system in comparison to human variability in ground truth (GT) segmentation of these challenging structures. RESULTS: The proposed approach yielded mean Dice coefficients of 0.84±0.03, 0.89±0.13, 0.84±0.07, and 0.86±0.05 for static 3D MRI, mid-retropalatal/mid-retroglossal 2D dynamic MRI, mid-sagittal 2D dynamic MRI, and isotropic dynamic 3D MRI, respectively. The quantitative results show excellent agreement with manual delineation results. The inter-reader study results demonstrate that the segmentation performance of our approach is statistically indistinguishable from manual segmentations considering the inter-reader variability in GT. CONCLUSIONS: The proposed method can be utilized for routine upper airway segmentation from static and dynamic MR images with high accuracy and efficiency. The proposed approach has the potential to be employed in other dynamic MRI-related applications, such as lung or heart segmentation.

Upper airway effective compliance during wakefulness and sleep in obese adolescents studied via two-dimensional dynamic MRI and semiautomated image segmentation.

Novel biomarkers of upper airway biomechanics may improve diagnosis of obstructive sleep apnea syndrome (OSAS). Upper airway effective compliance (EC), the slope of cross-sectional area versus pressure estimated using computational fluid dynamics (CFD), correlates with apnea-hypopnea index (AHI) and critical closing pressure (Pcrit). The study objectives are to develop a fast, simplified method for estimating EC using dynamic MRI and physiological measurements and to explore the hypothesis that OSAS severity correlates with mechanical compliance during wakefulness and sleep. Five obese children with OSAS and five control subjects with obesity aged 12-17 yr underwent anterior rhinomanometry, polysomnography, and dynamic MRI with synchronized airflow measurement during wakefulness and sleep. Airway cross section in retropalatal and retroglossal section images was segmented using a novel semiautomated method that uses optimized singular value decomposition (SVD) image filtering and k-means clustering combined with morphological operations. Pressure was estimated using rhinomanometry Rohrer's coefficients and flow rate, and EC was calculated from the area-pressure slope during five normal breaths. Correlations between apnea-hypopnea index (AHI), EC, and cross-sectional area (CSA) change were calculated using Spearman's rank correlation. The semiautomated method efficiently segmented the airway with average Dice Coefficient above 89% compared with expert manual segmentation. AHI correlated positively with EC at the retroglossal site during sleep (rs = 0.74, P = 0.014) and with change of EC from wake to sleep at the retroglossal site (rs = 0.77, P = 0.01). CSA change alone did not correlate significantly with AHI. EC, a mechanical biomarker which includes both CSA change and pressure variation, is a potential diagnostic biomarker for studying and managing OSAS.NEW & NOTEWORTHY This study investigated the dynamics of the upper airway at retropalatal and retroglossal sites during wakefulness and sleep by evaluating the effective compliance (EC) of each site and its correlation with apnea-hypopnea index (AHI) using novel semiautomated image processing. AHI correlated significantly with retroglossal EC during sleep and change of retroglossal EC from wake to sleep. The results suggest EC as a promising noninvasive diagnostic marker for estimating the mechanical properties of various upper airway regions in patients with OSAS.

Effect of sleep on upper airway dynamics in obese adolescents with obstructive sleep apnea syndrome.

STUDY OBJECTIVES: The biomechanical basis of obstructive sleep apnea syndrome (OSAS) may influence upper airway dynamics. In this study, we investigate dynamic changes during respiration in wakefulness and sleep in obese adolescents with and without OSAS. METHODS: Respiratory-gated dynamic magnetic resonance imaging (MRI) at the retropalatal and retroglossal regions was performed with simultaneous measurement of SpO2 and nasal-oral mask airflow and pressure. Airway cross-sectional area (CSA) was determined using AMIRA. Percent change in CSA was calculated from five continuous tidal breaths in states of wakefulness and sleep. Mixed effects models were used to evaluate interactions between group (OSAS/control), site (retropalatal/retroglossal), and stage (wake/sleep). RESULTS: We studied 24 children with OSAS (mean age 15.49 ± 2.00 years, mean apnea-hypopnea index [AHI] 16.53 ± 8.72 events/h) and 19 controls (mean age 14.86 ± 1.75 years, mean AHI 2.12 ± 1.69 events/h). Groups were similar in age, sex, height, weight, and BMI Z-score. Participants with OSAS had a 48.17% greater increase in percent change of airway CSA during sleep than controls (p < 0.0001), while there was no difference between groups during wakefulness (p = 0.6589). Additionally, participants with OSAS had a 48.80% increase in percent change of airway CSA during sleep as compared with wakefulness (p < 0.0001), whereas no such relationship was observed in controls (p = 0.5513). CONCLUSIONS: This study demonstrates significant effects of sleep on upper airway dynamics in obese children with OSAS. Dynamic MRI with physiological data can potentially provide further insight into the biomechanical basis of OSAS and assist in more effective management.

Effect of Nasal Valve Shape on Downstream Volume, Airflow, and Pressure Drop: Importance of the Nasal Valve Revisited.

OBJECTIVES: The relative importance of the nasal valve relative to the remainder of the nasal airway remains unknown. The goal of this article was to objectively measure the shape of the nasal inlet and its effect on downstream airflow and nasal cavity volume using a physical model and a physiologic flow model. METHODS: A patient who had isolated nasal valve surgery and had pre- and postoperative computed tomography scans available for analysis was studied. Nasal inlet shape measurements, computational fluid dynamics, and nasal volume analysis were performed using the computed tomography data. In addition, a physical model was used to determine the effect of nasal obstruction on downstream soft tissue. RESULTS: The postoperative shape of the nasal inlet was improved in terms of length and degree of tortuosity. Whereas the operated-on region at the nasal inlet showed an only 25% increase in cross-sectional area postoperatively, downstream nonoperated sites in the nasal cavity revealed increases in area ranging from 33% to 51%. Computational fluid dynamics analysis showed that airway resistance decreased by 42%, and pressure drop was reduced by 43%. Intraluminal mucosal expansion was found with nasal obstruction in the physical model. CONCLUSION: By decreasing the degree of bending and length at the nasal valve, inspiratory downstream nonoperated sites of the nasal cavity showed improvement in volume and airflow, suggesting that the nasal valve could play an oversized role in modulating the aerodynamics of the airway. This was confirmed with the physical model of nasal obstruction on downstream mucosa.

Biomechanics of the soft-palate in sleep apnea patients with polycystic ovarian syndrome.

Highly compliant tissue supporting the pharynx and low muscle tone enhance the possibility of upper airway occlusion in children with obstructive sleep apnea (OSA). The present study describes subject-specific computational modeling of flow-induced velopharyngeal narrowing in a female child with polycystic ovarian syndrome (PCOS) with OSA and a non-OSA control. Anatomically accurate three-dimensional geometries of the upper airway and soft-palate were reconstructed for both subjects using magnetic resonance (MR) images. A fluid-structure interaction (FSI) shape registration analysis was performed using subject-specific values of flow rate to iteratively compute the biomechanical properties of the soft-palate. The optimized shear modulus for the control was 38 percent higher than the corresponding value for the OSA patient. The proposed computational FSI model was then employed for planning surgical treatment for the apneic subject. A virtual surgery comprising of a combined adenoidectomy, palatoplasty and genioglossus advancement was performed to estimate the resulting post-operative patterns of airflow and tissue displacement. Maximum flow velocity and velopharyngeal resistance decreased by 80 percent and 66 percent respectively following surgery. Post-operative flow-induced forces on the anterior and posterior faces of the soft-palate were equilibrated and the resulting magnitude of tissue displacement was 63 percent lower compared to the pre-operative case. Results from this pilot study indicate that FSI computational modeling can be employed to characterize the mechanical properties of pharyngeal tissue and evaluate the effectiveness of various upper airway surgeries prior to their application.

Computational fluid dynamics upper airway effective compliance, critical closing pressure, and obstructive sleep apnea severity in obese adolescent girls.

Obstructive sleep apnea syndrome (OSAS) is associated with anatomical abnormalities restricting upper airway size and functional factors decreasing pharyngeal dilator activity in sleep. In this study we hypothesized that OSAS is also associated with altered pharyngeal mechanical compliance during wakefulness. Five OSAS and six control obese girls between 14 and 18 years of age were studied. All underwent polysomnography, critical closing pressure (Pcrit) studies, and dynamic MRI of the upper airway during awake tidal breathing. Effective airway compliance was defined as the slope of cross-sectional area vs. average pressure between maximum inspiration and maximum expiration along the pharyngeal airway. Pharyngeal pressure fields were calculated by using image-based computational fluid dynamics and nasal resistance. Spearman correlations were calculated to test associations between apnea-hypopnea index (AHI), Pcrit, and airway compliance. Effective compliances in the nasopharynx (CNP) and velopharynx (CVP) were lower and negative in OSAS compared with controls: -4.4 vs. 1.9 (mm2/cmH2O, P = 0.012) and -2.1 vs. 3.9 (mm2/cmH2O, P = 0.021), respectively, suggesting a strong phasic pharyngeal dilator activity during inspiration in OSAS compared with controls. For all subjects, CNP and AHI correlated negatively (rS = -0.69, P = 0.02), and passive Pcrit correlated with CNP (rS = -0.76, P = 0.006) and with AHI (rS = 0.86, P = 0.0006). Pharyngeal mechanics obtained during wakefulness could be used to characterize subjects with OSAS. Moreover, negative effective compliance during wakefulness and its correlation to AHI and Pcrit suggest that phasic dilator activity of the upper pharynx compensates for negative pressure loads in these subjects.

Design and validation of a dynamic cell-culture system for bone biology research and exogenous tissue-engineering applications.

Bone lacunocanalicular fluid flow ensures chemotransportation and provides a mechanical stimulus to cells. Traditional static cell-culture methods are ill-suited to study the intricacies of bone biology because they ignore the three-dimensionality of meaningful cellular networks and the lacunocanalicular system; furthermore, reliance on diffusion alone for nutrient supply and waste product removal effectively limits scaffolds to 2-3 mm thickness. In this project, a flow-perfusion system was custom-designed to overcome these limitations: eight adaptable chambers housed cylindrical cell-seeded scaffolds measuring 12 or 24 mm in diameter and 1-10 mm in thickness. The porous scaffolds were manufactured using a three-dimensional (3D) periodic microprinting process and were composed of hydroxyapatite/tricalcium phosphate with variable thicknesses, strut sizes, pore sizes and structural configurations. A multi-channel peristaltic pump drew medium from parallel reservoirs and perfused it through each scaffold at a programmable rate. Hermetically sealed valves permitted sampling or replacement of medium. A gas-permeable membrane allowed for gas exchange. Tubing was selected to withstand continuous perfusion for > 2 months without leakage. Computational modelling was performed to assess the adequacy of oxygen supply and the range of fluid shear stress in the bioreactor-scaffold system, using 12 × 6 mm scaffolds, and these models suggested scaffold design modifications that improved oxygen delivery while enhancing physiological shear stress. This system may prove useful in studying complex 3D bone biology and in developing strategies for engineering thick 3D bone constructs. Copyright © 2013 John Wiley & Sons, Ltd.

Computational fluid dynamics endpoints for assessment of adenotonsillectomy outcome in obese children with obstructive sleep apnea syndrome.

BACKGROUND: Improvements in obstructive sleep apnea syndrome (OSAS) severity may be associated with improved pharyngeal fluid mechanics following adenotonsillectomy (AT). The study objective is to use image-based computational fluid dynamics (CFD) to model changes in pharyngeal pressures after AT, in obese children with OSAS and adenotonsillar hypertrophy. METHODS: Three-dimensional models of the upper airway from nares to trachea, before and after AT, were derived from magnetic resonance images obtained during wakefulness, in a cohort of 10 obese children with OSAS. Velocity, pressure, and turbulence fields during peak tidal inspiratory flow were computed using commercial software. CFD endpoints were correlated with polysomnography endpoints before and after AT using Spearman׳s rank correlation (rs). RESULTS: Apnea hypopnea index (AHI) decreases after AT was strongly correlated with reduction in maximum pressure drop (dPTAmax) in the region where tonsils and adenoid constrict the pharynx (rs=0.78, P=0.011), and with decrease of the ratio of dPTAmax to flow rate (rs=0.82, P=0.006). Correlations of AHI decrease to anatomy, negative pressure in the overlap region (including nasal flow resistance), or pressure drop through the entire pharynx, were not significant. In a subgroup of subjects with more than 10% improvement in AHI, correlations between flow variables and AHI decrease were stronger than in all subjects. CONCLUSIONS: The correlation between change in dPTAmax and improved AHI suggests that dPTAmax may be a useful index for internal airway loading due to anatomical narrowing, and may be better correlated with AHI than direct airway anatomic measurements.

Anterior nasal resistance in obese children with obstructive sleep apnea syndrome.

OBJECTIVES/HYPOTHESIS: To evaluate nasal resistance in obese children with and without obstructive sleep apnea syndrome (OSAS), study the correlation between nasal resistance and severity of OSAS using the apnea-hypopnea index (AHI), and examine the association of gender and body mass index (BMI) with this measurement. STUDY DESIGN: Retrospective analysis. METHODS: Active anterior rhinomanometry was used to determine anterior nasal resistance (aNR) during wakefulness in the supine position during tidal breathing. Thirty obese children with OSAS (aged 13.8 ± 2.6 years, BMI z score 2.6 ± 0.4) and 32 matched obese controls (aged 13.6 ± 2.3 years, BMI z score 2.4 ± 0.4), were studied. Unpaired t tests and Spearman correlation were performed. RESULTS: The OSAS group had significantly higher aNR than the non-OSAS group during inspiration (P = .012) and expiration (P = .003). A significant correlation between inspiratory aNR and AHI was found for the OSAS group (r = 0.39, P = .04). The aNR did not correlate with BMI z score or with either gender. CONCLUSIONS: We noted a higher aNR in obese children with OSAS as compared to obese controls, and the aNR on inspiration correlated significantly with AHI. These findings suggest that a causal or augmentative effect of high inspiratory aNR may exist for obese children who exhibit OSAS. LEVEL OF EVIDENCE: 3b.

Mechanical study of polycaprolactone-hydroxyapatite porous scaffolds created by porogen-based solid freeform fabrication method.

MATERIALS AND METHODS: Polycaprolactone (PCL) and polycaprolactone-hydroxyapatite (PCL-HA) scaffolds with 600-µm pore size were fabricated by drop-on-demand printing (DDP) structured porogen method followed with injection molding. Specimens with special dimensions of 4.2×4.2×5.4 mm3 and 6.6×6.6×13.8 mm3 were designed and fabricated for compression and tensile tests, respectively. The mechanical study was performed on both solid and porous PCL and PCL-HA samples. The effect on mechanical properties of the HA content ratio in PCL-HA composites was investigated. RESULTS: Porous scaffold made of 80/20 PCL-HA composite had an ultimate compressive strength of 3.7±0.2 MPa and compression modulus of 61.4±3.4 MPa, which is in the range of reported trabecular bone's compressive strength. Increasing the concentration of HA in the composites raised compressive properties and stiffness significantly (P<0.05), which demonstrates that PCL-HA composites have the potential for application in bone regeneration. Tensile test of solid PCL and PCL-HA composites showed that the ultimate tensile strength and tensile modulus increased with increases of the concentration of HA in the composites. The tensile test was also conducted on PCL porous scaffold; the result indicated that the scaffold was slightly softer and weaker in tension compared with compression. CONCLUSIONS: Combining compression and tensile test results, our study may guide the possible application of these biomaterials in bone tissue engineering and support further development of microstructure-based models of scaffold mechanical properties.

Computational fluid dynamics endpoints to characterize obstructive sleep apnea syndrome in children.

Computational fluid dynamics (CFD) analysis may quantify the severity of anatomical airway restriction in obstructive sleep apnea syndrome (OSAS) better than anatomical measurements alone. However, optimal CFD model endpoints to characterize or assess OSAS have not been determined. To model upper airway fluid dynamics using CFD and investigate the strength of correlation between various CFD endpoints, anatomical endpoints, and OSAS severity, in obese children with OSAS and controls. CFD models derived from magnetic resonance images were solved at subject-specific peak tidal inspiratory flow; pressure at the choanae was set by nasal resistance. Model endpoints included airway wall minimum pressure (Pmin), flow resistance in the pharynx (Rpharynx), and pressure drop from choanae to a minimum cross section where tonsils and adenoids constrict the pharynx (dPTAmax). Significance of endpoints was analyzed using paired comparisons (t-test or Wilcoxon signed rank test) and Spearman correlation. Fifteen subject pairs were analyzed. Rpharynx and dPTAmax were higher in OSAS than control and most significantly correlated to obstructive apnea-hypopnea index (oAHI), r = 0.48 and r = 0.49, respectively (P < 0.01). Airway minimum cross-sectional correlation to oAHI was weaker (r = -0.39); Pmin was not significantly correlated. CFD model endpoints based on pressure drops in the pharynx were more closely associated with the presence and severity of OSAS than pressures including nasal resistance, or anatomical endpoints. This study supports the usefulness of CFD to characterize anatomical restriction of the pharynx and as an additional tool to evaluate subjects with OSAS.

Biomimetic design and fabrication of porous chitosan­gelatin liver scaffolds with hierarchical channel network.

The presence of a hierarchical channel network in tissue engineering scaffold is essential to construct metabolically demanding liver tissue with thick and complex structures. In this research, chitosan­gelatin (C/G) scaffolds with fine three-dimensional channels were fabricated using indirect solid freeform fabrication and freeze-drying techniques. Fabrication processes were studied to create predesigned hierarchical channel network inside C/G scaffolds and achieve desired porous structure. Static in-vitro cell culture test showed that HepG2 cells attached on both micro-pores and micro-channels in C/G scaffolds successfully. HepG2 proliferated at much higher rates on C/G scaffolds with channel network, compared with those without channels. This approach demonstrated a promising way to engineer liver scaffolds with hierarchical channel network, and may lead to the development of thick and complex liver tissue equivalent in the future.

Identifying the bad guy in a lineup using confidence judgments under deadline pressure.

Eyewitness-identification tests often culminate in witnesses not picking the culprit or identifying innocent suspects. We tested a radical alternative to the traditional lineup procedure used in such tests. Rather than making a positive identification, witnesses made confidence judgments under a short deadline about whether each lineup member was the culprit. We compared this deadline procedure with the traditional sequential-lineup procedure in three experiments with retention intervals ranging from 5 min to 1 week. A classification algorithm that identified confidence criteria that optimally discriminated accurate from inaccurate decisions revealed that decision accuracy was 24% to 66% higher under the deadline procedure than under the traditional procedure. Confidence profiles across lineup stimuli were more informative than were identification decisions about the likelihood that an individual witness recognized the culprit or correctly recognized that the culprit was not present. Large differences between the maximum and the next-highest confidence value signaled very high accuracy. Future support for this procedure across varied conditions would highlight a viable alternative to the problematic lineup procedures that have traditionally been used by law enforcement.

Biocompatibility and biodegradation studies of PCL/ß-TCP bone tissue scaffold fabricated by structural porogen method.

Three-dimensional printer (3DP) (Z-Corp) is a solid freeform fabrication system capable of generating sub-millimeter physical features required for tissue engineering scaffolds. By using plaster composite materials, 3DP can fabricate a universal porogen which can be injected with a wide range of high melting temperature biomaterials. Here we report results toward the manufacture of either pure polycaprolactone (PCL) or homogeneous composites of 90/10 or 80/20 (w/w) PCL/beta-tricalcium phosphate (ß-TCP) by injection molding into plaster composite porogens fabricated by 3DP. The resolution of printed plaster porogens and produced scaffolds was studied by scanning electron microscopy. Cytotoxicity test on scaffold extracts and biocompatibility test on the scaffolds as a matrix supporting murine osteoblast (7F2) and endothelial hybridoma (EAhy 926) cells growth for up to 4 days showed that the porogens removal process had only negligible effects on cell proliferation. The biodegradation tests of pure PCL and PCL/ß-TCP composites were performed in DMEM with 10 % (v/v) FBS for up to 6 weeks. The PCL/ß-TCP composites show faster degradation rate than that of pure PCL due to the addition of ß-TCP, and the strength of 80/20 PCL/ß-TCP composite is still suitable for human cancellous bone healing support after 6 weeks degradation. Combining precisely controlled porogen fabrication structure, good biocompatibility, and suitable mechanical properties after biodegradation, PCL/ß-TCP scaffolds fabricated by 3DP porogen method provide essential capability for bone tissue engineering.

Predicting dropout in the first 3 months of 12-step residential drug and alcohol treatment in an Australian sample.

OBJECTIVE: Premature termination from treatment is a major factor associated with poorer drug and alcohol treatment outcomes. The present study investigated client-related baseline predictors of dropout at 3 months from a faith-based 12-step residential drug treatment program. METHOD: Data were collected over a period of 14 months from eight residential drug and alcohol treatment programs run by The Australian Salvation Army. The final sample consisted of 618 participants, including 524 men (84.8%) and 94 women (15.2%). Predictor variables of interest were age, gender, primary drug of concern, criminal involvement, psychological distress, drug cravings, self-efficacy to abstain, spirituality, forgiveness of self and others, and life purpose. At 3 months, 264 participants (42.7%) remained in the treatment program, and 354 participants (57.3%) had dropped out. RESULTS: Binary logistic regression revealed that individuals were more likely to drop out by the 3-month time frame if at intake their primary drug of concern was a drug other than alcohol or they reported greater forgiveness of self. CONCLUSIONS: To the authors' knowledge, this is the first study to examine forgiveness as a predictor of dropout from a drug treatment program. Assessing patient's primary drug of concern and levels of forgiveness may be useful for residential drug treatment providers in constructing programs that provide differential treatment based on the results of these assessments.

Noninvasive estimation of pharyngeal airway resistance and compliance in children based on volume-gated dynamic MRI and computational fluid dynamics.

Computational fluid dynamics (CFD) analysis was used to model the effect of collapsing airway geometry on internal pressure and velocity in the pharyngeal airway of three sedated children with obstructive sleep apnea syndrome (OSAS) and three control subjects. Model geometry was reconstructed from volume-gated magnetic resonance images during normal tidal breathing at 10 increments of tidal volume through the respiratory cycle. Each geometry was meshed with an unstructured grid and solved using a low-Reynolds number k-ω turbulence model driven by flow data averaged over 12 consecutive breathing cycles. Combining gated imaging with CFD modeling created a dynamic three-dimensional view of airway anatomy and mechanics, including the evolution of airway collapse and flow resistance and estimates of the local effective compliance. The upper airways of subjects with OSAS were generally much more compliant during tidal breathing. Compliance curves (pressure vs. cross-section area), derived for different locations along the airway, quantified local differences along the pharynx and between OSAS subjects. In one subject, the distal oropharynx was more compliant than the nasopharynx (1.028 vs. 0.450 mm(2)/Pa) and had a lower theoretical limiting flow rate, confirming the distal oropharynx as the flow-limiting segment of the airway in this subject. Another subject had a more compliant nasopharynx (0.053 mm(2)/Pa) during inspiration and apparent stiffening of the distal oropharynx (C = 0.0058 mm(2)/Pa), and the theoretical limiting flow rate indicated the nasopharynx as the flow-limiting segment. This new method may help to differentiate anatomical and functional factors in airway collapse.

Upper airway structure and body fat composition in obese children with obstructive sleep apnea syndrome.

RATIONALE: Mechanisms leading to obstructive sleep apnea syndrome (OSAS) in obese children are not well understood. OBJECTIVES: The aim of the study was to determine anatomical risk factors associated with OSAS in obese children as compared with obese control subjects without OSAS. METHODS: Magnetic resonance imaging was used to determine the size of upper airway structure, and body fat composition. Paired analysis was used to compare between groups. Mixed effects regression models and conditional multiple logistic regression models were used to determine whether body mass index (BMI) Z-score was an effect modifier of each anatomic characteristic as it relates to OSAS. MEASUREMENTS AND MAIN RESULTS: We studied 22 obese subjects with OSAS (12.5 ± 2.8 yr; BMI Z-score, 2.4 ± 0.4) and 22 obese control subjects (12.3 ± 2.9 yr; BMI Z-score, 2.3 ± 0.3). As compared with control subjects, subjects with OSAS had a smaller oropharynx (P < 0.05) and larger adenoid (P < 0.01), tonsils (P < 0.05), and retropharyngeal nodes (P < 0.05). The size of lymphoid tissues correlated with severity of OSAS whereas BMI Z-score did not have a modifier effect on these tissues. Subjects with OSAS demonstrated increased size of parapharyngeal fat pads (P < 0.05) and abdominal visceral fat (P < 0.05). The size of these tissues did not correlate with severity of OSAS and BMI Z-score did not have a modifier effect on these tissues. CONCLUSIONS: Upper airway lymphoid hypertrophy is significant in obese children with OSAS. The lack of correlation of lymphoid tissue size with obesity suggests that this hypertrophy is caused by other mechanisms. Although the parapharyngeal fat pads and abdominal visceral fat are larger in obese children with OSAS we could not find a direct association with severity of OSAS or with obesity.

Rhino-sinus involvement in children with obstructive sleep apnea syndrome.

OBJECTIVE: Obstructive sleep apnea syndrome (OSAS) is commonly associated with adenotonsillar hypertrophy. We hypothesized that respiratory perturbations extend to other regions of the upper respiratory tract in such children, particularly to rhino-sinus regions. STUDY DESIGN: A prospective case control study using Magnetic Resonance Imaging (MRI) of the upper airway and surrounding tissues of OSAS and controls. Magnetic resonance imaging was used to evaluate radiographic changes within the: paranasal sinuses, middle ear and mastoid air cells, and the nasal passages. RESULTS: We studied 54 OSAS (age 5.7 ± 3.0 years) and 54 controls (age 6.2 ± 2.0 years, P = NS). Children with OSAS had significantly more opacification of: maxillary sinuses (P < 0.05), sphenoid sinuses (P < 0.01), and mastoid air cells (P < 0.01). They also had significantly more: middle ear effusions, (P < 0.001), prominence of inferior nasal turbinate(s) (P < 0.05), and deviation of the nasal septum (P < 0.05). CONCLUSIONS: Childhood OSAS is associated with a wide range of upper respiratory tract perturbations and is not limited to adenoid and tonsillar hypertrophy.