Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Nano Lett ; 23(24): 11395-11401, 2023 Dec 27.
Artigo em Inglês | MEDLINE | ID: mdl-38079217

RESUMO

Thermoelectric materials with high electrical conductivity and low thermal conductivity (e.g., Bi2Te3) can efficiently convert waste heat into electricity; however, in spite of favorable theoretical predictions, individual Bi2Te3 nanostructures tend to perform less efficiently than bulk Bi2Te3. We report a greater-than-order-of-magnitude enhancement in the thermoelectric properties of suspended Bi2Te3 nanoribbons, coated in situ to form a Bi2Te3/F4-TCNQ core-shell nanoribbon without oxidizing the core-shell interface. The shell serves as an oxidation barrier but also directly functions as a strong electron acceptor and p-type carrier donor, switching the majority carriers from a dominant n-type carrier concentration (∼1021 cm-3) to a dominant p-type carrier concentration (∼1020 cm-3). Compared to uncoated Bi2Te3 nanoribbons, our Bi2Te3/F4-TCNQ core-shell nanoribbon demonstrates an effective chemical potential dramatically shifted toward the valence band (by 300-640 meV), robustly increased Seebeck coefficient (∼6× at 250 K), and improved thermoelectric performance (10-20× at 250 K).

2.
Rev Sci Instrum ; 87(9): 094901, 2016 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-27782596

RESUMO

The suspended micro-thermometry measurement technique is one of the most prominent methods for probing the in-plane thermal conductance of low dimensional materials, where a suspended microdevice containing two built-in platinum resistors that serve as both heater and thermometer is used to measure the temperature and heat flow across a sample. The presence of temperature fluctuations in the sample chamber and background thermal conductance through the device, residual gases, and radiation are dominant sources of error when the sample thermal conductance is comparable to or smaller than the background thermal conductance, on the order of 300 pW/K at room temperature. In this work, we present a high resolution thermal conductance measurement scheme in which a bipolar direct current reversal technique is adopted to replace the lock-in technique. We have demonstrated temperature resolution of 1.0-2.6 mK and thermal conductance resolution of 1.7-26 pW/K over a temperature range of 30-375 K. The background thermal conductance of the suspended microdevice is determined accurately by our method and allows for straightforward isolation of this parasitic signal. This simple and high-throughput measurement technique yields an order of magnitude improvement in resolution over similarly configured lock-in amplifier techniques, allowing for more accurate investigation of fundamental phonon transport mechanisms in individual nanomaterials.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...