RESUMO
Image-sensor technology is the foundation of many emerging applications, where the photodetector is designed to interact with incoming photons that have specific colors or wavelengths. A color filter is therefore crucial to enable the selective spectral response of the photodetector and to eliminate the crosstalk interference resulting from ambient lights. Unfortunately, a reduced detection sensitivity of the photodetector is inevitable due to an imperfect light filtering, which greatly limits the practical applications of selective-response photodetectors. Herein, we demonstrate a bulk-heterojunction (BHJ) organic composite featuring a self-filtering light responsive characteristic. Through a careful optimization of the BHJ film, the organic photodetector (OPD) demonstrates a high-selective spectral response to the infrared (IR) radiation without the need of applying a color filter. As a result, the self-filtering top-illuminated OPD exhibits a narrowband external quantum efficiency (EQE) of 53% with a narrow full width at half-maximum (fwhm) of 56 nm centering at 1080 nm. A high responsivity of 0.46 A W-1 is also achieved at 1080 nm wavelength due to the self-filtering characteristic.
RESUMO
Three two-dimensional donor-acceptor conjugated copolymers consisting of a benzo[1,2-b:4,5-b']dithiophene derivative and thieno[3,2-b]thiophene with a conjugated side chain were designed and synthesized for use in bulk heterojunction (BHJ) or nonfullerene polymer solar cells (PSCs). Through attaching various acceptor end groups to the conjugated side chain on the thieno[3,2-b]thiophene moiety, the electronic, photophysical, and morphological properties of these copolymers were significantly affected. It was found that the intermolecular charge transfer interactions were enhanced with the increase in the acceptor strength on the thieno[3,2-b]thiophene moiety. Moreover, a better microphase separation was obtained in the copolymer: PC71BM or ITIC blend films when a strong acceptor end group on the thieno[3,2-b]thiophene moiety was used. As a result, BHJ PSCs based on copolymer:PC71BM blend films as active layers exhibited power conversion efficiencies from 2.82% to 4.41%, while those of nonfullerene copolymer:ITIC-based inverted PSCs ranged from 6.09% to 7.25%. These results indicate the side-chain engineering on the end groups of thieno[3,2-b]thiophene unit through a vinyl bridge linkage is an effective way to adjust the photophysical properties of polymers and morphology of blend films, and also have a significant influence on devices performance.
RESUMO
We demonstrate high-efficiency small-molecule-based white phosphorescent organic light emitting diodes (PHOLEDs) by single-active-layer solution-based processes with the current efficiency of 17.3 cdA(-1) and maximum luminous efficiency of 8.86 lmW(-1) at a current density of 1 mA cm(-2). The small-molecule based emitting layers are codoped with blue and orange phosphorescent dyes. We show that the presence of CsF/Al at cathodes not only improves electron transport in oxadiazole-containing electron transport layers (ETLs), but also facilitates electron injection through the reacted oxadiazole moiety to reduce interface resistance, which results in the enhancement of current efficiency. By selecting oxadiazole-based materials as ETLs with proper electron injection layer (EIL)/cathode structures, the brightness and efficiency of white PHOLEDs are significantly improved.
RESUMO
A newly synthesized benzo(1,2-b:4,5-b')dithiophene-based low band-gap copolymer pBCN is amenable to solvent annealing in the fabrication of organic photovoltaics, of which power conversion efficiency is greatly improved to 4.2% with PC(61)BM or 4.9% with PC(71)BM.
