Solar-Driven Evaporators with Thin-Film-Composite Architecture Inspired by Plant Roots for Treating Concentrated Nano-/Submicrometer Emulsions.

Oil/water separation by porous materials has received growing interest over the past years since the ever-increasing oily wastewater discharges seriously threaten our living environment. Purification of nano-sized and concentrated emulsions remains a big challenge because of the sharp flux decline by blocking the pores and fouling the surfaces of those porous materials. Herein, we propose a solar-driven evaporator possessing thin-film-composite architecture to deal with these two bottlenecks. Inspired by plant roots, our evaporator composes of a large-pore sponge wrapped by a thin hydrogel film, which is constructed by the contra-diffusion and cross-linking of alginate and calcium ions at the sponge surface. The dense superoleophobic hydrogel layer serves as a selective barrier that prevents oil emulsions but allows water permeation, while the inner sponge with large pores facilitates water transport within the evaporator, ensuring sufficient water supply for evaporation. By splitting the single evaporator into an array, the evaporator performs a high evaporation rate of ∼3.10 kg·m-2·h-1 and oil removal efficiency above 99.9% for a variety of oil emulsions. Moreover, it displays a negligible decline in the evaporation rate when treating concentrated emulsions for 8 h.

Suspended Membrane Evaporators Integrating Environmental and Solar Evaporation for Oily Wastewater Purification.

Solar-driven evaporation is promising in oily wastewater treatment, in particular for emulsions, but conventional evaporators suffer from pore blocking by residual oil or contamination by volatile oil compounds in the condensed water. In the current research, we develop a suspended membrane evaporator integrating solar evaporation with oil-in-water emulsion separation. The heating and evaporating interface is separated from the rejecting interface to avoid oil escape and improve heat management. A temperature gradient forms on the membrane surface that can promote evaporation performance by combining both solar and environmental evaporation. Such an evaporator achieves a maximum evaporation rate of 1.645 kg/(m2·h) as well as an apparent evaporation efficiency of 111.9%. Moreover, the superhydrophilic and superoleophobic membrane shows excellent oil repellence and emulsion rejection, which can achieve an oil removal efficiency above 98.8% in oil-in-water emulsion separation, and high evaporation rate recovery in cycling tests. A scaled-up membrane evaporator array produces ∼8 kg/(m2·d) of clean water from oily wastewater in outdoor experiments, further demonstrating the strong purification performance of this evaporator in oily wastewater treatment.

Brushable Lubricant-Infused Porous Coating with Enhanced Stability by One-Step Phase Separation.

Slippery lubricant-infused porous surface (SLIPS) is a promising solution to undesired adhesion. Unfortunately, the complicated fabrication process and limited coating area block its practical applications. Herein, we report a one-step strategy to fabricate polypropylene-based SLIPS coatings through thermally induced phase separation, in which the lubricant is in situ infiltrated within a polymer network formed during cooling. The solid-liquid-phase separation process was monitored by an in situ hot-stage microscope. Such coating performs outstanding self-cleaning, anti-corrosion, and anti-bacterial performance, as well as enhanced stability of the lubricant layer because the lubricant is well adapted in the structure.