Thermally Induced Orderly Alignment of Porphyrin Photoactive Motifs in Metal-Organic Frameworks for Boosting Photocatalytic CO2 Reduction.

Efficient transfer of charge carriers through a fast transport pathway is crucial to excellent photocatalytic reduction performance in solar-driven CO2 reduction, but it is still challenging to effectively modulate the electronic transport pathway between photoactive motifs by feasible chemical means. In this work, we propose a thermally induced strategy to precisely modulate the fast electron transport pathway formed between the photoactive motifs of a porphyrin metal-organic framework using thorium ion with large ionic radius and high coordination number as the coordination-labile metal node. As a result, the stacking pattern of porphyrin molecules in the framework before and after the crystal transformations has changed dramatically, which leads to significant differences in the separation efficiency of photogenerated carriers in MOFs. The rate of photocatalytic reduction of CO2 to CO by IHEP-22(Co) reaches 350.9 µmol·h-1·g-1, which is 3.60 times that of IHEP-21(Co) and 1.46 times that of IHEP-23(Co). Photoelectrochemical characterizations and theoretical calculations suggest that the electron transport channels formed between porphyrin molecules inhibit the recombination of photogenerated carriers, resulting in high performance for photocatalytic CO2 reduction. The interaction mechanism of CO2 with IHEP-22(Co) was clarified by using in-situ electron paramagnetic resonance, in-situ diffuse reflectance infrared Fourier transform spectroscopy, in-situ extended X-ray absorption fine structure spectroscopy, and theoretical calculations. These results provide a new method to regulate the efficient separation and migration of charge carriers in CO2 reduction photocatalysts and will be helpful to guide the design and synthesis of photocatalysts with superior performance for the production of solar fuels.

Theoretical Insights on the Complexation of Americium(III) and Europium(III) with Diglycolamide- and Dimethylacetamide-Functionalized Calix[4]arenes.

Separation of minor actinides from lanthanides is one of the biggest challenges in spent fuel reprocessing due to the similar physicochemical properties of trivalent lanthanides (Ln(III)) and actinides (An(III)). Therefore, developing ligands with excellent extraction and separation performance is essential at present. As an excellent pre-organization platform, calixarene has received more attention on Ln(III)/An(III) separation. In this work, we systematically explored the complexation behaviors of the diglycolamide (DGA)/dimethylacetamide (DMA)-functionalized calix[4]arene extractants for Eu(III) and Am(III) using relativistic density functional theory (DFT). These calix[4]arene-derived ligands were obtained by functionalization with two or four binding units at the narrow edge of the calix[4]arene platform. All bonding nature analyses suggested that the Eu-L complexes possess stronger interaction compared to Am-L analogues, resulting in the higher extraction capacity of the these calix[4]arene ligands toward Eu(III). Thermodynamic analysis demonstrates that these pre-organized ligands on the calix[4]arene platform with four binding units yield better extraction abilities than the single ligands. Although DMA-functionalized ligands show stronger complexation stability for metal ions, in acidic solutions, the calix[4]arene ligands with DGA binding units have better extraction performance for Eu(III) and Am(III) due to the basicity of the DMA ligand. This work enabled us to gain a deeper understanding of the bonding properties between supramolecular ligands and lanthanides/actinides and afford useful insights into designing efficient supramolecular ligands for separating Ln(III)/An(III).

Theoretical Probing of Size-Selective Crown Ether Macrocycle Ligands for Transplutonium Element Separation.

Effective separation and recovery of chemically similar transplutonium elements from adjacent actinides is extremely challenging in spent fuel reprocessing. Deep comprehension of the complexation of transplutonium elements and ligands is significant for the design and development of ligands for the in-group separation of transplutonium elements. Because of experimental difficulties of transplutonium elements, theoretical calculation has become an effective means of exploring transplutonium complexes. In this work, we systematically investigated the coordination mechanism between transplutonium elements (An = Am, Cm, Bk, Cf) and two crown ether macrocyclic ligands [N,N'- bis[(6-carboxy-2-pyridyl)methyl]-1,10-diaza-18-crown-6 (H2bp18c6) and N,N'-bis[(6-methylphosphinic-2-pyridyl)methyl]-1,10-diaza-18-crown-6 (H2bpp18c6)] through quasi-relativistic density functional theory. The extraction complexes of [Anbp18c6]+ and [Anbpp18c6]+ possess similar geometrical structures with actinide atoms located in the cavity of the ligands. Bonding nature analysis indicates that the coordination ability of the coordinating atoms in pendent arms is stronger than that in the crown ether macrocycle because of the limitation of the macrocycle. Most of the coordination atoms of the H2bp18c6 ligand have a stronger ability to coordinate with metal ions than those of the H2bpp18c6 ligand. In addition, the bonding strength between the metal ions and ligands gradually weakens from Am to Cf, which is mainly attributed to the size selectivity of the ligands. Thermodynamic analysis shows that the H2bp18c6 ligand has a stronger extraction capacity than the H2bpp18c6 ligand, while the H2bpp18c6 ligand is superior in terms of the in-group separation ability. The extraction capacity of the two ligands for metal ions gradually decreases across the actinide series, indicating that these crown ether macrocycle ligands have size selectivity for these actinide cations as a result of steric constraint of the crown ether ring. We hope that these results offer theoretical clues for the development of macrocycle ligands for in-group transplutonium separation.

Encapsulation of Polymetallic Oxygen Clusters in a Mesoporous/Microporous Thorium-Based Porphyrin Metal-Organic Framework for Enhanced Photocatalytic CO2 Reduction.

Solar-initiated CO2 reduction is significant for green energy development. Herein, we have prepared a new mesoporous/microporous porphyrin metal-organic framework (MOF), IHEP-20, loaded with polymetallic oxygen clusters (POMs) to form a composite material POMs@IHEP-20 for visible-light-driven photocatalytic CO2 reduction. The as-made composite material exhibits good stability in water from pH 0 to 11. After POMs were introduced to IHEP-20, they showed superior activity toward photocatalytic CO2 reduction with a CO production rate of 970 µmol·g-1·h-1, which is 3.27 times higher than that of pristine IHEP-20. This study opens a new door for the design and synthesis of high-performance catalysts for the photocatalytic reduction of CO2.

Potassium Ions Induced Framework Interpenetration for Enhancing the Stability of Uranium-Based Porphyrin MOF with Visible-Light-Driven Photocatalytic Activity.

The stability of many MOFs is not satisfactory, which severely limits the exploration of their potential applications. Given this, we have proposed a strategy to improve the stability of MOFs by introducing alkali metal K+ capable of coordinating with metal nodes, which finally induces the interpenetrating uranyl-porphyrin framework to connect as a whole (IHEP-9). The stability experiments reveal that the IHEP-9 has good thermal stability up to 400 °C and can maintain its crystalline state in the aqueous solution with pH ranging from 2 to 11. The catalytic activity of IHEP-9 as a heterogeneous photocatalyst for CO2 cycloaddition under the driving of visible light at room temperature is also demonstrated. This induced interpenetration and fixation method may be promising for the fabrication of more functional MOFs with improved structural stability.

Adsorption of Eu(III) and Th(IV) on three-dimensional graphene-based macrostructure studied by spectroscopic investigation.

One of the most important reasons for the controversy over the development of nuclear energy is the proper disposal of spent fuel. Separation of actinide and lanthanide ions is an important part of safe long-term storage of radioactive waste. Herein, a three-dimensional (3D) graphene-based macrostructure (GOCS) was utilized to remove actinide thorium and lanthanide europium ions from aqueous solutions. The adsorption of Eu(III) and Th(IV) on the GOCS was evaluated as a function of adsorption time, solution pH, initial ion concentrations, and ionic strength. The experimentally determined maximum adsorption capacities of this GOCS for Eu(III) (pH 6.0) and Th(IV) (pH 3.0) are as high as 150 and 220 mg/g, respectively. By using Fourier transformation infrared (FT-IR), X-ray photoelectron (XPS), and extended X-ray absorption fine structure (EXAFS) spectroscopy, we concluded that the Eu(III) and Th(IV) adsorption was predominantly attributed to the inner-sphere coordination with various oxygen- and nitrogen-containing functional groups on GOCS surfaces. Our selective adsorption results demonstrate that the actinide and lanthanide ions can be effectively separated from transition metal ions. This study provides new clues to the overall recycling of actinide and lanthanide ions in radioactive environmental pollution treatments.

Removal of uranium(VI) from aqueous solution using iminodiacetic acid derivative functionalized SBA-15 as adsorbents.

Three different functional SBA-15 were prepared by a post-grafting method using three iminodiacetic acid derivatives of ethylenediaminetriacetic acid (ED3A), diethylenetriaminetetraacetic acid (DT4A), and 1,2-cyclohexylenedinitrilotriacetic acid (CyD3A), which were used as adsorbents for removal of uranium(vi) from aqueous solution. These materials were characterized by FT-IR, NMR, TEM, nitrogen adsorption/desorption experiments, and elemental analysis. The effect of pH, ionic strength, contact time, solid-liquid ratio, initial metal ion concentration, temperature, and coexisting ions on uranium(vi) sorption behaviors of the functionalized SBA-15 was studied. Typical sorption isotherms (Langmuir and Freundlich) were determined for the sorption process, and the maximum sorption capacity was calculated. The influence of functional groups on uranium(vi) sorption was also discussed. As a result, compared with other current U(vi) sorbents (granite, kaolin, attapulgite), SBA-15-1,2-cyclohexylenedinitrilotriacetic acid (SBA-15-CyD3A) possessed good selective sorption properties, which had potential application in separation of uranium(vi).

Preparation and application of attapulgite/iron oxide magnetic composites for the removal of U(VI) from aqueous solution.

Recently, magnetic sorbents have received considerable attention because of their excellent segregative features and sorption capacities. Herein, attapulgite/iron oxide magnetic (ATP/IOM) composites were prepared and characterized. The sorption results indicated that ATP/IOM composites were superior to ATP and iron oxides individually for the removal of U(VI) from aqueous solution. Based on X-ray photoelectron spectroscopy (XPS) analysis and surface complexation model, the main sorption species of U(VI) on ATP were==X(2)UO(2)(0) below pH 4.0 and==S(s)OUO(2)(+), ==S(w)OUO(2)CO(3)(-), and==S(w)OUO(2)(CO(3))(2)(3-) above pH 5.0. However the prevalent species on ATP/IOM composites were==S(s)OUO(2)(+) and==S(w)OUO(2)(CO(3))(2)(3-) over the observed pH range. ATP/IOM composites are a promising candidate for pre-concentration and immobilization of radionuclides from large volumes of aqueous solutions, as required for remediation purposes.

Triterpenes and neolignans from the roots of Nannoglottis carpesioides.

Seven oleanane-type triterpenes and two 8-O-4'-neolignans, along with five known compounds (three 28-noroleanane-type triterpenes, one sarratane triterpene, and one neolignan), were isolated from roots of Nannoglottis carpesioides. Their structures were elucidated by spectroscopic methods, including 1D and 2D NMR, HRMS, and CD. The absolute configurations of two triterpenes were determined by experimental and calculated circular dichroism (CD) and optical rotation values. Ten compounds were evaluated for their cytotoxicity against human promyelocytic leukaemia (HL-60) and human hepatoma (Hep-G2) cells using the MTT assay. The antioxidant activities of these compounds were assessed by ABTS radical-scavenging assays. Among the tested compounds, three compounds exhibited moderate radical-scavenging activity against ABTS·âº, with IC50 values of 22.4, 17.4, and 23.2 µM, respectively.

Terpenoids from the aerial parts of Parasenecio deltophylla.

Five new modified eremophilane-type sesquiterpenes (1-5), including three norsesquiterpenes (1-3), and one new monoterpene (6) were isolated from the aerial parts of Parasenecio deltophylla. Their structures were established on the basis of HRMS and NMR methods. The cytotoxicity of compounds 1-4 and 6 against selected cancer cell lines, including human promyelocytic leukemia (HL-60) and human hepatoma (Hep-G2), was evaluated. Antioxidant activities of these compounds were assessed by ABTS and DPPH methods.

Sesquiterpene lactones from Scorzonera austriaca.

Six new sesquiterpene lactones, scorzoaustriacoside (1), scorzoaustriacin (2), scorzoaustriacin 3-O-beta-d-glucoside (3), 4-epi-dihydroestafiatol (4), 14-isovaleroxyscorzoaustricin (5), and 14-isovaleroxyscorzoaustricin sulfate (6), along with five known guaianolides, were isolated from an acetone extract of the roots of Scorzonera austriaca. The structures of the new compounds were elucidated mainly by interpretation of their 1D and 2D NMR and HRMS data. Several isolates obtained in this investigation were evaluated against a small panel of cancer cell lines.

Effects of cadmium on absorption, excretion, and distribution of nickel in rats.

The effects of cadmium (Cd (II)) on absorption, excretion, and distribution of nickel (Ni (II)) were studied in rats using (63)Ni-NiCl(2) as radiotracer in the presence and absence of CdCl(2), through intraperitoneal injection (i.p.). The time-concentration curves in the blood were fitted with a two-compartment model. The peak time (t ((peak))) is 0.31 h in the absence of Cd (II), and it is 5.5 h in the presence of Cd (II). The levels of nickels were higher at 3 h and lower (close to zero) at 24 h in all organs of interest, except kidneys, in the absence of Cd (II). There still residue Ni (II) at 72 h post-injection in the presence of Cd (II). The Cd (II) did effect the total Ni (II) excretion 24 h post-injection. Our study showed that cadmium has a competitive effect on the absorption of nickel and an inhibitory effect on the elimination of it, so cadmium may induce the bioaccumulation of nickel in the body.

[Pharmacokinetic parameter and residua of 63Ni-NiCl2 in rat].

Absorption distribution and excretion of 63Ni-NiCl2, administered orally to rats were studied by using liquid scintillation counting method. It was observed that the concentration-time curves in blood fitted the two compartment model of pharmacokinetics, Ka=6.18 h(-1), T(1/2)alpha =0.79 h, T(1/2)beta=40.68 h, CL =0.42 mL kg(-1) h(-1), Tmax =0.53 h, Cmax=24,987.75 min(-1) mL(-1), and Vd=0.016 L kg(-1). After rats were treated by 63Ni-NiCl2 for 15 days, in 22 tissues tested, the contents of 63Ni-NiCl2 in hair, hypothalamus, hypophysis, pancreas, small and large intestines were higher, and the residua of 63Ni-NiCl2 was not discovered in liver, kidney and heart. Radioactivity eliminated was 83.27% by urine and feces, 54.86% by urine, 28.41% by feces.