SILAR Growth of ZnO NSs/CdS QDs on the Optical Fiber-Based Opto-Electrode with Guided In Situ Light and Its Application for the "Signal-On" Detection of Inflammatory Cytokine.

In this study, a novel integrated photoelectrochemical (PEC) sensor platform was proposed, utilizing an optical fiber (OF) as the working electrode for guided in situ light. A CdS quantum dots (QDs)/ZnO nanosheets (NSs) n-n heterojunction was quickly and easily constructed on the OF surface by successive ionic layer adsorption and reaction (SILAR). Au nanoparticles (NPs)@dsDNA as a capturing probe were modified on the CdS QDs/ZnO NSs@OF (CZ@OF). Due to the energy transfer between Au NPs@dsDNA and CdS QDs, the resultant opto-electrode has a lower background near zero, enabling the "signal-on" detection of biomarkers (interleukin-6 (IL-6) as a model). The OF-PEC biosensor demonstrated a wide linear range from 1 to 100 pg mL-1 with a regression coefficient (R2) of 0.9958 and an impressive detection limit (LOD) of 0.19 pg mL-1. More significantly, the proposed OF-PEC can be successfully used for the detection of IL-6 in serum samples from patients with pulmonary arterial hypertension, and it showed consistency and is more sensitive to trace concentrations compared to BD FACSCanto II flow cytometry used at the hospital. This holds significance for an early disease diagnosis. Therefore, the proposed OF-PEC not only achieves integration of the light source and sensing interface but also enables sensitive and accurate "signal-on" detection of IL-6. Furthermore, due to the flexibility and remote detection capabilities of OF, the application of OF-PEC is expected to be expanded more widely. This approach opens up possibilities for advances in PEC sensing.

Highly sensitive temperature and refractive index sensor based on no-core fiber cascaded with a balloon-shaped bent single-mode fiber.

A highly sensitive temperature and refractive index (RI) sensor based on no-core fiber (NCF) cascaded with a balloon-shaped bent single-mode fiber (BSBSF) is proposed and demonstrated. The NCF can excite higher-order modes which will be concentrated and transmitted into the BSBSF due to the characteristic of self-imaging effect. The BSBSF has an excellent temperature performance due to the high thermo-optical coefficient and thermal expansion coefficient of the polymer coating. The NCF and BSBSF are both conducive to the excitation of higher-order modes, which induces the sensitivity of the sensor with an efficiency improvement. The experimental results show that the maximum temperature sensitivity is -3.19n m/ ∘ C in the range of 22°C-83°C, which is the highest temperature sensitivity in the cascaded BSBSF structure to our best knowledge. In addition, the maximum RI sensitivity is 232.16 nm/RIU when the RI changes from 1.3234 to 1.3512. Compared with other cascaded BSBSF structures, this sensor has a higher temperature sensitivity and can be applicated in the prospects of food, biology, and environmental monitoring.

Wide-field determination of aqueous mercury(II) based on tail-extensible DNA fluorescent probe with tunable dynamic range.

Mercury (Hg) is one of the most hazardous pollutants, widely distributed in water, atmosphere, and soil, while the Hg contents from different sources are greatly different. Until now, numerous reported methods are only suitable for a kind of sample because they cannot reconcile sensitivity and linear range. In this work, a tail-extensible DNA fluorescent probe for "turn on" detection of Hg2+ with tunable dynamic range and high sensitivity was developed, which was based on segmental hybridization between silver nanoclusters (AgNCs)-covered DNA and different guanine-rich DNAs. By adding adenine-guanine-cytosine (AGC) base repeats as a tail of the guanine-rich DNA, the formation constant of T-Hg2+-T complex was effectively modulated within two orders of magnitude. Based on it, a tunable dynamic range from 0.035 to 0.2 pM to 8.0-120.0 pM was achieved by combining four fluorescent probes with different tail lengths. The Hg2+contents from different sources were successfully measured. This evidenced the proposed sensor's application toward wide-field detection, which is useful for the direct and objective comparison of results from different sources, and therefore providing a way for solving the shortcomings of reported methods for Hg2+ detection. Additionally,this present method is simple, cost-effective and time-saving, ultrasensitive and highly selective, which is favorable for expanding its applications and subsequent mercury pollution control.

High-power tunable mid-infrared fiber gas laser source by acetylene-filled hollow-core fibers.

High-power tunable pulsed and CW mid-infrared fiber gas laser sources in acetylene-filled hollow-core fibers, to the best of our knowledge, are demonstrated for the first time. By precisely tuning the wavelength of the pump source, an amplified tunable 1.5 µm diode laser, to match different absorption lines of acetylene, the laser output is step-tunable in the range of 3.09~3.21 µm with a maximum pulse average power of ~0.3 W (~0.6 µJ pulse energy) and a maximum CW power of ~0.77 W, making this system the first watt-level tunable fiber gas laser operating at mid-infrared range. The output spectral and power characteristics are systemically studied, and the explanations about the change of the ratio of the P over R branch emission lines with the pump power and the gas pressure are given, which is useful for the investigations of mid-infrared fiber gas lasers.

0.83 W, single-pass, 1.54 µm gas Raman source generated in a CH4-filled hollow-core fiber operating at atmospheric pressure.

We report here the first watt-level efficient single-pass 1.54 µm fiber gas Raman source by methane-filled hollow-core fiber operating at atmospheric pressure. Pumped with a high-power MOPA (master oscillator power amplifier) structure Q-switched 1.06 µm pulsed solid-state laser, efficient 1.54 µm Stokes wave is generated in a single-pass configuration by vibrational stimulated Raman scattering of methane molecules. With an experimentally optimized fiber length of 3.2 m, we get a 1543.9 nm Stokes wave operating at atmospheric pressure with a record average power of ~0.83 W, which is about 12 times higher than the similar experiment previously reported, and the corresponding power conversion efficiency is about 45%. Operating at atmospheric pressure makes it more convenient in future applications.

Realization of large energy proportion in the central lobe by coherent beam combination based on conformal projection system.

In this paper, we experimentally validate a tiled-aperture conformal projection system with the largest array filling factor and element beam truncation factor to the best of our knowledge. The conformal projection system, which is made up of a hexagonal adaptive fiber-optics collimator (AFOC) array with the proximate ideal intensity distributions, is fabricated and the performance of output beam is tested and evaluated properly and carefully. Both of the active phase-locking control and precise tip-tilt control are implemented successfully in the CBC of the hexagonal seven-beam-array. Experimental results show a large energy proportion (47%, which increases by over 10% comparing with the previously demonstrated largest value) in the central lobe is achieved and the residual phase error is lower than λ/27. When the AFOC array performs, the precise tilt control makes the combining beams overlap well and the average normalized metric value is improved from 0.336 without control to 0.947 with both of active piston and tip-tilt phase controls while the fringe contrast increases from 19% to more than 91% correspondingly. This work presents a promising structure for the achievement of large energy proportion in the central lobe in high power fiber laser CBC systems.

A new hybrid coding for protein secondary structure prediction based on primary structure similarity.

The coding pattern of protein can greatly affect the prediction accuracy of protein secondary structure. In this paper, a novel hybrid coding method based on the physicochemical properties of amino acids and tendency factors is proposed for the prediction of protein secondary structure. The principal component analysis (PCA) is first applied to the physicochemical properties of amino acids to construct a 3-bit-code, and then the 3 tendency factors of amino acids are calculated to generate another 3-bit-code. Two 3-bit-codes are fused to form a novel hybrid 6-bit-code. Furthermore, we make a geometry-based similarity comparison of the protein primary structure between the reference set and the test set before the secondary structure prediction. We finally use the support vector machine (SVM) to predict those amino acids which are not detected by the primary structure similarity comparison. Experimental results show that our method achieves a satisfactory improvement in accuracy in the prediction of protein secondary structure.

High-Performance Ratiometric Electrochemical Method Based on the Combination of Signal Probe and Inner Reference Probe in One Hairpin-Structured DNA.

In this work, the dual signal-tagged hairpin structured DNA (dhDNA)-based ratiometric probe was developed by the combination of ferrocene-labeled signal probe (Fc-sP) and methylene blue-modified inner reference probe (MB-rP) in one hairpin-structured DNA. On the basis of this, a high-performance ratiometric electrochemical method was proposed for biomarker detection. In contrast to the conventional ratiometric electrochemical probe, this dhDNA ratiometric probe integrated sP and rP into one structure, which ensured the completely same modification condition and the interdependence of sP and rP on one sensing interface. As a result, the dhDNA ratiometric probe possesses a stronger ability to eliminate the disturbance of environmental change, which was proven by the fact that the changes of the surface roughness and pH value had no significant effects on the reproducibility and stability of the sensor. Moreover, in the proposed strategy, the initial ratio responses of Fc-sP to MB-rP ((IFc-sP/IMB-rP)0) are controllable and can be kept constant at 1:1, which is favorable for the increase in signal-to-noise ratio and sensitivity. When the sequence of Fc-sP is designed as the aptamer of mucin 1 (MUC1), the dhDNA ratiometric sensor with signal amplification of Au nanoparticles becomes feasible for the sensitive detection of MUC1 by one-step incubation procedure. Compared with the conventional ratiometric sensor, the proposed dhDNA sensor has higher reproducibility, accuracy, stability, sensitivity, and simplicity, which are significant for the development of the sensor in various fields for practical applications.

Beam shaping for uplink transmission of a relay mirror system.

We establish the model of a two-Cassegrain-telescope system that is commonly used in a relay mirror system. With this model, uplink transmission of the relay mirror system is theoretically analyzed. We determined that uplink transmission with turbulence completely corrected is not an optimal mode. We improve power coupling efficiency of the two-Cassegrain-telescope system by optimizing the optical phase at the launching telescope by use of the stochastic parallel gradient descent algorithm. For a 10 km vertical uplink transmission, power coupling efficiencies of the system are 63.10%, 87.82%, and 97.80% corresponding to an open-loop mode, a closed-loop mode, and a closed-loop with optimization mode, respectively. For a 30 km vertical uplink transmission, power coupling efficiencies of the system are 22.35%, 82.66%, and 91.91%, corresponding to an open-loop mode, a closed-loop mode, and a closed-loop with optimization mode, respectively. The results show that power coupling efficiency of the two-Cassegrain-telescope system is significantly improved.