Entropy-Assisted Anion-Reinforced Solvation Structure for Fast-Charging Sodium-Ion Full Batteries.

Anion-reinforced solvation structure favors the formation of inorganic-rich robust electrode-electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast-charging performance. Herein, a trade-off in tuning anion-reinforced solvation structure and high ionic conductivity is realized by the entropy-assisted hybrid ester-ether electrolyte. Anion-reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester-based electrolyte, which merits the accelerated desolvation energy and gradient inorganic-rich electrode-electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry-level 18650 cylindrical cells.

Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries.

The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is of great importance for advancing large-scale energy storage but is plagued by the lack of suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability and ultralong cycling stability over 10,000 cycles via structural optimization with electrochemically inert Ni atoms. Their thermal stability, all-climate properties, and potential in full cells are investigated in detail. Multiple in situ characterizations reveal that the outstanding performances benefit from their highly reversible three-phase transformations and trimetal (Mn-Ni-Fe) synergistic effects. In addition, a high sodium diffusion coefficient and a low volume distortion of 2.3% are observed through in situ transmission electron microscopy and first-principles calculations. Our results provide insights into the structural engineering of Prussian blue analogues for advanced sodium-ion batteries in large-scale energy storage applications.

P-doped spherical hard carbon with high initial coulombic efficiency and enhanced capacity for sodium ion batteries.

Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs) due to its cost-effectiveness and low-voltage plateau capacity. Heteroatom doping is considered as an effective strategy to improve the sodium storage capacity of HC. However, most of the previous heteroatom doping strategies are performed at a relatively low temperature, which could not be utilized to raise the low-voltage plateau capacity. Moreover, extra doping of heteroatoms could create new defects, leading to a low initial coulombic efficiency (ICE). Herein, we propose a repair strategy based on doping a trace amount of P to achieve a high capacity along with a high ICE. By employing the cross-linked interaction between glucose and phytic acid to achieve the in situ P doped spherical hard carbon, the obtained PHC-0.2 possesses a large interlayer space that facilitates Na+ storage and transportation. In addition, doping a suitable amount of P could repair some defects in carbon layers. When used as an anode material for SIBs, the PHC-0.2 exhibits an enhanced reversible capacity of 343 mA h g-1 at 20 mA g-1 with a high ICE of 92%. Full cells consisting of a PHC-0.2 anode and a Na2Fe0.5Mn0.5[Fe(CN)6] cathode exhibited an average potential of 3.1 V with an initial discharge capacity of 255 mA h g-1 and an ICE of 85%. The full cell displays excellent cycling stability with a capacity retention of 80.3% after 170 cycles. This method is simple and low-cost, which can be extended to other energy storage materials.

Industrial-Scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage.

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical battery with excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

Hard carbon for sodium-ion batteries: progress, strategies and future perspective.

Because of its abundant resources, low cost and high reversible specific capacity, hard carbon (HC) is considered as the most likely commercial anode material for sodium-ion batteries (SIBs). Therefore, reasonable design and effective strategies to regulate the structure of HCs play a crucial role in promoting the development of SIBs. Herein, the progress in the preparation approaches for HC anode materials is systematically overviewed, with a special focus on the comparison between traditional fabrication methods and advanced strategies emerged in recent years in terms of their influence on performance, including preparation efficiency, initial coulombic efficiency (ICE), specific capacity and rate capability. Furthermore, the advanced strategies are categorized into two groups: those exhibiting potential for large-scale production to replace traditional methods and those presenting guidelines for achieving high-performance HC anodes from top-level design. Finally, challenges and future development prospects to achieve high-performance HC anodes are also proposed. We believe that this review will provide beneficial guidance to actualize the truly rational design of advanced HC anodes, facilitating the industrialization of SIBs and assisting in formulating design rules for developing high-end advanced electrode materials for energy storage devices.

Nonflammable Succinonitrile-Based Deep Eutectic Electrolyte for Intrinsically Safe High-Voltage Sodium-Ion Batteries.

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na+ sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25 °C) and 86.3% after 100 cycles (60 °C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance.

A conductive and sodiophilic Ag coating layer regulating Na deposition behaviors for highly reversible sodium metal batteries.

Sodium metal batteries have attracted increasing interest recently, but suffer from severe dendrite growth caused by uneven Na plating/stripping behavior, which may result in the piercing of the membrane, with short circuiting and even cause explosions. Herein, a conductive and sodiophilic Ag coating layer is introduced to regulate Na deposition behaviors for highly reversible sodium metal batteries. Ag coated Zn foil with enhanced sodiophilicity, rapid Na+ transfer kinetics and superior electronic conductivity guarantee the homogenized Na+ ion and electric field distribution. This enables remarkably low overpotentials and uniform Na plating/stripping behavior with ultrahigh Coulombic efficiency of 99.9% during 500 cycles. As expected, the enhanced electrochemical performance of the anode-less battery and anode-free battery coupled with Prussian blue is achieved with the help of Ag coating. This work emphasizes the role of the conductive and sodiophilic coating layer in regulating the Na deposition behaviors for highly reversible sodium metal batteries.

Optimizing Interplanar Spacing, Oxygen Vacancies and Micromorphology via Lithium-Ion Pre-Insertion into Ammonium Vanadate Nanosheets for Advanced Cathodes in Aqueous Zinc-Ion Batteries.

Ammonium vanadates, featuring an N─H···O hydrogen bond network structure between NH4 + and V─O layers, have become popular cathode materials for aqueous zinc-ion batteries (AZIBs). Their appeal lies in their multi-electron transfer, high specific capacity, and facile synthesis. However, a major drawback arises as Zn2+ ions tend to form bonds with electronegative oxygen atoms between V─O layers during cycling, leading to irreversible structural collapse. Herein, Li+ pre-insertion into the intermediate layer of NH4V4O10 is proposed to enhance the electrochemical activity of ammonium vanadate cathodes for AZIBs, which extends the interlayer distance of NH4V4O10 to 9.8 Å and offers large interlaminar channels for Zn2+ (de)intercalation. Moreover, Li+ intercalation weakens the crystallinity, transforms the micromorphology from non-nanostructured strips to ultrathin nanosheets, and increases the level of oxygen defects, thus exposing more active sites for ion and electron transport, facilitating electrolyte penetration, and improving electrochemical kinetics of electrode. In addition, the introduction of Li+ significantly reduces the bandgap by 0.18 eV, enhancing electron transfer in redox reactions. Leveraging these unique advantages, the Li+ pre-intercalated NH4V4O10 cathode exhibits a high reversible capacity of 486.1 mAh g-1 at 0.5 A g-1 and an impressive capacity retention rate of 72% after 5,000 cycles at 5 A g-1.

A universal synthesis strategy of Pd-based trimetallic nanowires for efficient alcohol electrooxidation.

Trimetallic nanowires (NWs) have drawn much attention in efficient alcohol oxidation reaction (AOR) due to their unique features, including high atomic utilization efficiency and fast electron transfer ability. However, a universal strategy to synthesize Pd-based trimetallic NWs with high catalytic performance is still lacking. Herein, we develop a universal method for facile synthesis of PdBiM (M = Pt, Ru, Ir, Co, Cu) NWs with excellent AOR activities. By taking PdBiPt NWs as an example, the formation mechanism was investigated, and it is found that introduction of bismuth (Bi) plays an important role in facilitating the formation of the NW structure. Moreover, the PdBiPt NWs deliver an outstanding performance toward both the ethanol oxidation reaction (EOR) and the methanol oxidation reaction (MOR). Density functional theory (DFT) calculations together with experimental results disclose that the moderate electronic structure of trimetallic PdBiPt NWs can optimize the adsorption of OHads and weaken the adsorption of COads, thereby leading to the substantially enhanced AOR performance. We believe that this work can inspire the design of multimetallic NWs as high-performance catalysts.

Pre-Oxidation Strategy Transforming Waste Foam to Hard Carbon Anodes for Boosting Sodium Storage Performance.

Large reserves, high capacity, and low cost are the core competitiveness of disordered carbon materials as excellent anode materials for sodium-ion batteries (SIBs). And the existence and improper treatment of a large number of organic solid wastes will aggravate the burden on the environment, therefore, it is significant to transform wastes into carbon-based materials for sustainable energy utilization. Herein, a kind of hard carbon materials are reported with waste biomass-foam as the precursor, which can improve the sodium storage performance through pre-oxidation strategy. The introduction of oxygen-containing groups can promote structural cross-linking, and inhibit the melting and rearrangement of carbon structure during high-temperature carbonization that produces a disordered structure with a suitable degree of graphitization. Moreover, the micropore structure are also regulated during the high-temperature carbonization process, which is conducive to the storage of sodium ions in the low-voltage plateau region. The optimized sample as an electrode material exhibits excellent reversible specific capacity (308.0 mAh g-1) and initial Coulombic efficiency (ICE, 90.1%). In addition, a full cell with the waste foam-derived hard carbon anode and a Na3V2(PO4)3 cathode is constructed with high ICE and energy density. This work provides an effective strategy to conversion the waste to high-value hard carbon anode for sodium-ion batteries.

Achieving All-Plateau and High-Capacity Sodium Insertion in Topological Graphitized Carbon.

Hard carbon anodes with all-plateau capacities below 0.1 V are prerequisites to achieve high-energy-density sodium-ion storage, which holds promise for future sustainable energy technologies. However, challenges in removing defects and improving the insertion of sodium ions head off the development of hard carbon to achieve this goal. Herein, a highly cross-linked topological graphitized carbon using biomass corn cobs through a two-step rapid thermal-annealing strategy is reported. The topological graphitized carbon constructed with long-range graphene nanoribbons and cavities/tunnels provides a multidirectional insertion of sodium ions whilst eliminating defects to absorb sodium ions at the high voltage region. Evidence from advanced techniques including in situ XRD, in situ Raman, and in situ/ex situ transmission electron microscopy (TEM) indicates that the sodium ions' insertion and Na cluster formation occurred between curved topological graphite layers and in the topological cavity of adjacent graphite band entanglements. The reported topological insertion mechanism enables outstanding battery performance with a single full low-voltage plateau capacity of 290 mAh g-1 , which is almost 97% of the total capacity.

Facile synthesis of defect-rich RuCu nanoflowers for efficient hydrogen evolution reaction in alkaline media.

Developing high-performance electrocatalysts toward hydrogen evolution reaction (HER) in alkaline media is highly desirable for industrial applications in the field of water splitting but is still challenging. Herein, we successfully synthesized RuCu nanoflowers (NFs) with tunable atomic ratios using a facile wet chemistry method. The Ru3Cu NFs need only 55 mV to achieve a current density of 10 mA cm-2, which shows ideal durability with only 4 mV decay after 2000 cycles, largely outperforming the catalytic properties of commercial Pt/C. The Ru3Cu NFs comprise many nanosheets that can provide more active sites for HER. In addition, the introduction of Cu can modulate the electronic structure of Ru, facilitate water dissociation, and optimize H adsorption/desorption ability. Thus, the flower-like structure together with the proper incorporation of Cu boosts HER performance.

Pt-Sn alloy shells with tunable composition and structure on Au nanoparticles for boosting ethanol oxidation.

Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@PtxSny core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.

PdPtRu nanocages with tunable compositions for boosting the methanol oxidation reaction.

PtRu/C is a well-known commercial electrocatalyst with promising performance for the methanol oxidation reaction (MOR). Further improving the MOR properties of PtRu-based electrocatalysts is highly desirable, especially through structure design. Here we report a facile approach for the synthesis of PdPtRu nanocages with different components through a seed-mediated approach followed by chemical etching. The Pd@PtRu nanocubes were first generated using Pd nanocubes as the seeds and some Pd atoms were subsequently etched away, leading to the nanocages. When evaluated as electrocatalysts for the MOR in acidic media, the PdPtRu nanocages exhibited substantially enhanced catalytic activity and stability relative to commercial Pt/C and PtRu/C. Specifically, PdPt2.5Ru2.4 achieved the highest specific (8.2 mA cm-2) and mass (0.75 mA mgPt -1) activities for the MOR, which are 2.2 and 4.2 times higher than those of commercial Pt/C. Such an enhancement can be attributed to the highly open structure of the nanocages, and the possible synergistic effect between the three components.

Enhanced electrocatalytic reduction of CO2 to formate via doping Ce in Bi2O3 nanosheets.

Formate is considered as the most economically viable product of the prevalent electrochemical CO2 reduction (ECR) products. However, most of the catalysts for ECR to formate in aqueous solution often suffer from low activity and limited selectivity. Herein, we report a novel Ce-doped Bi2O3 nanosheet (NS) electrocatalyst by a facile solvothermal method for highly efficient ECR to formate. The 5.04% Ce-doped Bi2O3 NSs exhibited a current density of 37.4 mA cm-2 for the production of formate with a high formate faradaic efficiency (FE) of 95.8% at -1.12 V. The formate FE was stably maintained at about 90% in a wide potential range from -0.82 to -1.22 V. More importantly, density functional theory (DFT) calculations revealed that Ce doping can lead to a significant synergistic effect, which promotes the formation and the adsorption of the OCHO* intermediate for ECR, while significantly inhibiting the hydrogen evolution reaction via depressing the formation of *H, thus helping achieve high current density and FE. This work provides an effective and promising strategy to develop efficient electrocatalysts with heteroatom doping and new insights for boosting ECR into formate.

Sn-Doped Bi2O3 nanosheets for highly efficient electrochemical CO2 reduction toward formate production.

Electrocatalytic CO2 reduction to formate is considered as a perfect route for efficient conversion of the greenhouse gas CO2 to value-added chemicals. However, it still remains a huge challenge to design a catalyst with both high catalytic activity and selectivity for target products. Here we report a unique Sn-doped Bi2O3 nanosheet (NS) electrocatalyst with different atomic percentages of Sn (1.2, 2.5, and 3.8%) prepared by a simple solvothermal method for highly efficient electrochemical reduction of CO2 to formate. Of them, the 2.5% Sn-doped Bi2O3 NSs exhibited the highest faradaic efficiency (FE) of 93.4% with a current density of 24.3 mA cm-2 for formate at -0.97 V in the H-cell and a maximum current density of nearly 50 mA cm-2 was achieved at -1.27 V. The formate FE is stable maintained at over 90% in a wide potential range from -0.87 V to -1.17 V. Electrochemical and density functional theory (DFT) analyses of undoped and Sn doped Bi2O3 NSs indicated that the strong synergistic effect between Sn and Bi is responsible for the enhancement in the adsorption capacity of the OCHO* intermediate, and thus the activity for formate production. In addition, we coupled 2.5% Sn-doped Bi2O3 NSs with a dimensionally stable anode (DSA) to realize battery-driven highly active CO2RR and OER with decent activity and efficiency.

Facile Synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction.

Pt-based multimetallic nanorings with a hollow structure are attractive as advanced catalysts due to their fantastic structure feature. However, the general method for the synthesis of such unique nanostructures is still lack. Here we report the synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) multimetallic nanorings by selective epitaxial growth of Pt alloyed shells on the periphery of Pd nanoplates in combination with oxidative etching of partial Pd in the interior. In situ generation of CO and benzoic acid arising from interfacial catalytic reactions between Pd nanoplates and benzaldehyde are critical to achieve high-quality Pt-based multimetallic nanorings. Specifically, the in-situ generated CO promotes the formation of Pt alloyed shells and their epitaxial growth on Pd nanoplates. In addition, the as-formed benzoic acid and residual oxygen are responsible for selective oxidative etching of partial Pd in the interior. When evaluated as electrocatalysts, the Pd@PtRh nanorings exhibit remarkably enhanced activity and stability for ethanol oxidation reaction (EOR) compared to the Pd@PtRh nanoplates and commercial Pt/C due to their hollow nanostructures.

Strain effect in Pd@PdAg twinned nanocrystals towards ethanol oxidation electrocatalysis.

The strain effect is a critical knob to tune the catalytic performance and has received unprecedented research interest recently. However, it is difficult to distinguish the strain effect from the synergistic effect, especially in alloyed catalysts. Here we have synthesized Pd@PdAg icosahedra and {111} truncated bi-pyramids with only different surface strains between them as electrocatalysts for the ethanol oxidation reaction (EOR). Due to the same exposed facets and compositions of the two electrocatalysts, their EOR performances are mainly determined by the surface strains of PdAg alloys. These two electrocatalysts provide a perfect model to investigate the role of the strain effect in tuning the EOR performance. It is indicated that Pd@PdAg {111} truncated bi-pyramids with a surface strain of 0.3% show better catalytic activity and durability than Pd@PdAg icosahedra with a surface strain of 2.1% including commercial Pd/C. Density functional theory (DFT) calculations reveal that the lowered d-band center of 0.3% strained PdAg alloys relative to 2.1% strained ones reduced the adsorption energy of the acetate-evolution key intermediate *CH3CO, thereby promoting the enhancement in the catalytic performance of Pd@PdAg nanocrystals for the EOR. Electrochemical analysis further verifies this demonstration on the key role of the strain effect in PdAg alloys for tuning catalytic performance.

Facile synthesis of ternary PtPdCu alloy hexapods as highly efficient electrocatalysts for methanol oxidation.

Developing an efficient Pt-based multimetallic electrocatalyst with well-defined shapes for methanol oxidation reaction (MOR) is critical, however, it still remains challenging. Here we report a one-pot approach for the synthesis of ternary PtPdCu alloy hexapods with different compositions. Their MOR activities increased in the sequence Pt2PdCu4 < Pt3PdCu4 < Pt5PdCu5, and were substantially higher than that of commercial Pt/C. Specifically, the Pt5PdCu5 hexapods exhibited the highest mass (0.97 mA µgPt -1) and specific (7.39 mA cm-2) activities towards MOR, and were 5.4 and 19.4 times higher than those of commercial Pt/C (0.18 mA µgPt -1 and 0.38 mA cm-2), respectively. This enhancement could be probably attributed to the bifunctional mechanism and ligand effect through the addition of Cu and Pd as well as the unique dendritic structure. The better tolerance for CO poisoning also endowed the PtPdCu hexapods with superior durability relative to commercial Pt/C.

Tuning Surface Structure of Pd3Pb/Pt n Pb Nanocrystals for Boosting the Methanol Oxidation Reaction.

Developing an efficient Pt-based electrocatalyst with well-defined structures for the methanol oxidation reaction (MOR) is critical, however, still remains a challenge. Here, a one-pot approach is reported for the synthesis of Pd3Pb/Pt n Pb nanocubes with tunable Pt composition varying from 3.50 to 2.37 and 2.07, serving as electrocatalysts toward MOR. Their MOR activities increase in a sequence of Pd3Pb/Pt3.50Pb << Pd3Pb/Pt2.07Pb < Pd3Pb/Pt2.37Pb, which are substantially higher than that of commercial Pt/C. Specifically, Pd3Pb/Pt2.37Pb electrocatalysts achieve the highest specific (13.68 mA cm-2) and mass (8.40 A mgPt -1) activities, which are ≈8.8 and 6.8 times higher than those of commercial Pt/C, respectively. Structure characterizations show that Pd3Pb/Pt2.37Pb and Pd3Pb/Pt2.07Pb are dominated by hexagonal-structured PtPb intermetallic phase on the surface, while the surface of Pd3Pb/Pt3.50Pb is mainly composed of face-centered cubic (fcc)-structured Pt x Pb phase. As such, hexagonal-structured PtPb phase is much more active than the fcc-structured Pt x Pb one toward MOR. This demonstration is supported by density functional theory calculations, where the hexagonal-structured PtPb phase shows the lowest adsorption energy of CO. The decrease in CO adsorption energy and structural stability also endows Pd3Pb/Pt n Pb electrocatalysts with superior durability relative to commercial Pt/C.