Sensitivity Analysis of Factors Influencing Blast-like Loading on Reinforced Concrete Slabs Based on Grey Correlation Degree.

Blast simulators are capable of applying blast-like loading to components in a safe and controlled laboratory environment, overcoming the inherent shortcomings of blast testing in terms of data acquisition, test cycle time, and cost. In this paper, reasonable assumptions and refinements are made to the components and shape of the impact module, a key component of the blast simulator, to achieve diversity in simulated blast loading. By designing four rubber shapes, the importance of ellipsoid rubber as an elastic cushion for simulating blast loading was determined. In order to assess the effectiveness of this optimization, numerical calculations based on a calibrated finite element model were performed around four factors: flat rubber thickness, ellipsoid rubber thickness, impact velocity, and impact modulus mass. Additionally, a grey correlation sensitivity analysis was carried out to evaluate the effect of these factors on the impact loading on the reinforced concrete (RC) slab. The results indicate that peak pressure and impulse had opposite sensitivities to velocity and mass. Changes in ellipsoid rubber thickness had a more positive effect on the impact loading than flat rubber thickness. An in-depth study of the role of these influencing factors is important for the design and improvement of impact modules.

A Research Investigation into the Impact of Reinforcement Distribution and Blast Distance on the Blast Resilience of Reinforced Concrete Slabs.

Reinforcement is one of the important factors affecting the anti-blast performance of reinforced concrete (RC) slabs. In order to study the impact of different reinforcement distribution and different blast distances on the anti-blast performance of RC slabs, 16 model tests were carried out for RC slab members with the same reinforcement ratio but different reinforcement distribution and the same proportional blast distance but different blast distances. By comparing the failure patterns of RC slabs and the sensor test data, the impact of reinforcement distribution and blast distance on the dynamic response of RC slabs was analyzed. The results show that, under contact explosion and non-contact explosion, the damage degree of single-layer reinforced slabs is more serious than that of double-layer reinforced slabs. When the scale distance is the same, with the increase of distance, the damage degree of single-layer reinforced slabs and double-layer reinforced slabs increases first and then decreases, and the peak displacement, rebound displacement and residual deformation near the center of the bottom of RC slabs gradually increase. When the blast distance is small, the peak displacement of single-layer reinforced slabs is smaller than that of double-layer reinforced slabs. When the blast distance is large, the peak displacement of double-layer reinforced slabs is smaller than that of single-layer reinforced slabs. No matter how large the blast distance, the rebound peak displacement of the double-layer reinforced slabs is smaller, and the residual displacement is larger. The research in this paper provides a reference for the anti-explosion design, construction and protection of RC slabs.