RESUMO
The highly selective conversion of CO2 into valuable C2H4 is a highly important but particularly challenging reaction. Herein, the metal-organic frameworks MOF-74(Cu) with infinite Cu(II)-O chains and Cu-BTC (BTC=benzene-1,3,5-tricarboxylate) with paddle-wheel binuclear Cu(II) clusters are used as precursors. These MOFs are reduced by NaBH4 to obtain Cu0/Cuδ+-based photocatalysts denoted as R-MOF-74(Cu) and R-Cu-BTC, respectively. Significantly, R-MOF-74(Cu) achieves a high selectivity of 90.2 % for C2H4 with a yield rate of 6.5 µmol g-1 within 5 h due to its high Cu+ content. To the best of our knowledge, this C2H4 product selectivity is a record high among all the photocatalysts reported so far for photocatalytic CO2 reduction. In contrast, R-Cu-BTC only forms CO as a product with a cumulative yield of 0.7 µmol g-1 within 5 h. Photoelectrochemical characterization and electron paramagnetic resonance results show that R-MOF-74(Cu) has low interfacial transfer resistance, high photogenerated electron separation efficiency, and excellent CO2 activation and water oxidation performance. In addition, in situ Fourier transform infrared spectroscopy is used to determine the possible reaction pathway from CO2 to C2H4 over R-MOF-74(Cu). This work demonstrates the great potential of MOF-derived photocatalysts for the conversion of CO2 into C2H4 and provides guidance for future photocatalyst development.
RESUMO
Photoreduction of CO2 with water into chemical feedstocks of fuels provides a green way to help solve both the energy crisis and carbon emission issues. Metal-organic frameworks (MOFs) show great potential for CO2 photoreduction. However, poor water stability and sluggish charge transfer could limit their application. Herein, three water-stable MOFs functionalized with electron-donating methyl groups and/or electron-withdrawing trifluoromethyl groups are obtained for the CO2 photoreduction. Compared with UiO-67-o-CF3-CH3 and UiO-67-o-(CF3)2, UiO-67-o-(CH3)2 achieves excellent performance with an average CO generation rate of 178.0 µmol g-1 h-1 without using any organic solvent or sacrificial reagent. The superior photocatalytic activity of UiO-67-o-(CH3)2 is attributed to the fact that compared with trifluoromethyl groups, methyl groups could not only elevate CO2 adsorption capacity and reduction potential but also promote photoinduced charge separation and migration. These are evidenced by gas physisorption, photoluminescence, time-resolved photoluminescence, electrochemical impedance spectroscopy, transient photocurrent characteristics, and density functional theory calculations. The possible working mechanisms of electron-donating methyl groups are also proposed. Moreover, UiO-67-o-(CH3)2 demonstrates excellent reusability for the CO2 reduction. Based on these results, it could be affirmed that the strategy of modulating substituent electronegativity could provide guidance for designing highly efficient photocatalysts.
RESUMO
Global warming and heavy metal pollution pose tremendous challenges to human development, and photocatalysis is considered to be an effective strategy to solve these problems. Herein, copper(II) tetra (4-carboxyphenyl) porphyrin (CuTCPP) molecules were successfully in situ loaded onto Bi4O5Br2 by a hydrothermal approach. A series of experimental results show that the light absorption capacity and photogenerated carrier separation efficiency were synchronously enhanced after the construction of CuTCPP/Bi4O5Br2 composites. Hence, the as-prepared composites possess significantly improved photocatalytic ability for both CO2 and Cr(VI) reduction. Specifically, CuTCPP/Bi4O5Br2-2 achieves a CO generation rate of 17.14 µmol g-1 under 5 h irradiation, which is twice as high as that of Bi4O5Br2 (8.57 µmol g-1). Besides, the optimized CuTCPP/Bi4O5Br2-2 also exhibits a removal rate of 61.87% for Cr(VI) within 100 min under irradiation. Furthermore, the mechanism of CO2 and Cr(VI) photoreduction was explored by in situ Fourier transform infrared spectroscopy and capture experiments, respectively. This work can be a reference toward the construction of photocatalysts with high activity for solar energy conversion.
RESUMO
Photocatalytic peroxymonosulfate (PMS) oxidation systems demonstrate significant potential and promising prospects through the interconnection of photocatalytic and PMS oxidation for simultaneously achieving efficient pollutant removal and reduction of PMS dosage, which prevents resource wastage and secondary pollution. In this study, a Z-scheme Bi25FeO40/BiOCl (BOFC) heterojunction was constructed to carry out the photocatalytic PMS oxidation process for tetracyclines (TCs) pollutants at low PMS concentrations (0.08 mM). The photocatalytic PMS oxidation rate of Bi25FeO40/BiOCl composites for tetracycline hydrochloride (TCH), chlortetracycline (CTC), oxytetracycline (OTC) and doxycycline (DXC) reaches 86.6%, 83.6%, 86.7%, and 88.0% within 120 min. Simultaneously, the BOFC/PMS system under visible light (Vis) equally displayed the practical application prospects for the solo and mixed simulated TCs antibiotics wastewater. Based on the electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) valence band spectrum, a Z-scheme electron migration pathway was proposed to elucidate the mechanism underlying the performance enhancement of BOFC composites. Bi25FeO40 in BOFC composites can serve as active site for activating PMS by the formation of Fe3+/Fe2+ cycle. Toxicity estimation software tool (T.E.S.T.) and mung beans planting experiment demonstrates that BOFC/PMS/Vis system can reduce toxicity of TCs wastewater. Therefore, BOFC/PMS/Vis system achieves efficient examination in different water environments and efficient utilization of PMS, which displays a scientific reference for achieving environmentally-friendly and resource-saving handling processes.
Assuntos
Poluentes Ambientais , Peróxidos , Águas Residuárias , Espécies Reativas de Oxigênio , Antibacterianos , Tetraciclina , Luz , Tetraciclinas , OxigênioRESUMO
The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 µmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.
RESUMO
Broad-spectrum-driven high-performance artificial photosynthesis is quite challenging. Herein, atomically ultrathin bismuthene with semimetallic properties is designed and demonstrated for broad-spectrum (ultraviolet-visible-near infrared light) (UV-vis-NIR)-driven photocatalytic CO2 hydrogenation. The trap states in the bandgap produced by edge dangling bonds prolong the lifetime of the photogenerated electrons from 90 ps in bulk Bi to 1650 ps in bismuthine, and excited-state electrons are enriched at the edge of bismuthine. The edge dangling bonds of bismuthene as the active sites for adsorption/activation of CO2 increase the hybridization ability of the Bi 6p orbital and O 2p orbital to significantly reduce the catalytic reaction energy barrier and promote the formation of CâH bonds until the generation of CH4. Under λ ≥ 400 nm and λ ≥ 550 nm irradiation, the utilization ratios of photogenerated electron reduction CO2 hydrogenation to CO and CH4 for bismuthene are 58.24 and 300.50 times higher than those of bulk Bi, respectively. Moreover, bismuthene can extend the CO2 hydrogenation reaction to the near-infrared region (λ ≥ 700 nm). This pioneering work employs the single semimetal element as an artificial photosynthetic catalyst to produce a broad spectral response.
RESUMO
According to the typical Sillén-structured BiOBr, a simple solvothermal method was used to successfully synthesise Sillén-structured bimetallic oxyhalide CdBiO2Br with the existence of 1-hexadecyl-3-methylimidazolium bromide ([C16mim]Br), a kind of reactive ionic liquid. The introduction of the metal cadmium, which can form Sillén-structured bimetallic oxyhalide, made the alternating structure of BiOBr originally [Bi2O2]2+ and bilayer Br- modified to that of [CdBiO2]+ and monolayer Br-. So that the distance between layer and layer is greatly shortened, which facilitates the migration and separation of photogenerated carriers and promotes the generation of more reactive oxygen species. After modification, the band positions of CdBiO2Br materials can make more full use of visible light and more favourable utilisation of solar resources. As confirmed by radical trapping analysis and ESR analysis, superoxide radical (·O2-) and hole (h+) acted the major part during photocatalysis. The possible intermediate products that appeared during the degradation progress were analyzed by LC-MS. Moreover, the generation of superoxide ions was quantitatively analyzed by nitroblue tetrazolium chloride (NBT). In this paper, we present an ultra-thin layered material for visible light catalysis, which enlightens a feasible scheme for the research and development of new layered photocatalytic materials.
Assuntos
Bismuto , Processos Fotoquímicos , Bismuto/química , Luz , CatáliseRESUMO
A universal atomic layer confined doping strategy is developed to prepare Bi24 O31 Br10 materials incorporating isolated Cu atoms. The local polarization can be created along the CuOBi atomic interface, which enables better electron delocalization for effective N2 activation. The optimized Cu-Bi24 O31 Br10 atomic layers show 5.3× and 88.2× improved photocatalytic nitrogen fixation activity than Bi24 O31 Br10 atomic layer and bulk Bi24 O31 Br10 , respectively, with the NH3 generation rate reaching 291.1 µmol g-1 h-1 in pure water. The polarized Cu-Bi site pairs can increase the non-covalent interaction between the catalyst's surface and N2 molecules, then further weaken the covalent bond order in NN. As a result, the hydrogenation pathways can be altered from the associative distal pathway for Bi24 O31 Br10 to the alternating pathway for Cu-Bi24 O31 Br10 . This strategy provides an accessible pathway for designing polarized metal site pairs or tuning the non-covalent interaction and covalent bond order.
RESUMO
The construction of a broad-spectrum photocatalytic system is of great significance for maximizing the utilization of solar energy. Herein, a surface oxygen vacancy triggering high-efficient broad-spectrum BiOCl0.5I0.5 solid solution photocatalyst was successfully fabricated via a one-pot solvothermal process. The UV-vis diffuse reflectance spectra revealed that the introduced oxygen vacancy appears to extend the absorption region of BiOCl0.5I0.5 to a wider wavelength range. Under λ > 580 nm light irradiation for 5 h, nearly 85.6% ciprofloxacin was degraded by BiOCl0.5I0.5 with rich oxygen vacancy, the ciprofloxacin removal efficiency was 3.4 times higher than that with less oxygen vacancy. Moreover, the density functional theory calculations and photoelectrochemical characterizations indicated the excited electrons would preferentially transfer to the new defect level induced by oxygen vacancy, thus greatly reducing the recombination of photogenerated carriers. This work tends to deepen the understanding of defect engineering in steering the construction of broad-spectrum Bi-based solid solution photocatalysts as well as its application in environmental remediation.
Assuntos
Bismuto , Ciprofloxacina , Bismuto/química , Catálise , Ciprofloxacina/química , Oxigênio/química , Luz SolarRESUMO
The photocatalytic reduction of carbon dioxide (CO2) to fossil fuels has attracted widespread attention. However, obtaining the high value-added hydrocarbons, especially C2+ products, remains a considerable challenge. Herein, gold (Au) nanoparticle-modified bismuth-rich bismuth oxybromide Bi12O17Br2 nanotube composites were designed and tested. Au nanoparticles act as electron traps and thermal electron donors that promote the efficient separation and migration of carriers to form the C2+ product. As a result, compared with the pure Bi12O17Br2 nanotubes, Au@Bi12O17Br2 composites can not only produce the carbon monoxide (CO) and methane (CH4), but also covert CO2 into ethane (C2H6). In this study, Au@Bi12O17Br2-700 was used to obtain a C2H6 production rate of 29.26 µmol h-1 g-1. The selectivities during a 5-hour test reached 94.86% for hydrocarbons and 90.81% for C2H6. The proposed approach could be used to design high-performance photocatalysts to convert CO2 into high value-added hydrocarbon products.
Assuntos
Nanopartículas Metálicas , Nanotubos , Bismuto , Dióxido de Carbono , Catálise , Etano , Ouro , HidrocarbonetosRESUMO
Photocatalysis technology has been considered as a sustainable and promising strategy for pollutant degradation. However, the photocatalytic activity is limited by the unsatisfactory carrier separation efficiency of photocatalysts and insufficient reactive oxygen species. Herein, the oxygen vacancies (OVs) mediated Bi12O17Cl2 ultra-thin nanobelt (ROV Bi12O17Cl2) was fabricated via solvothermal method. The surface oxygen vacancies can act as the 'electron sink' and boost charge separation. Thus, the ROV Bi12O17Cl2 shows superior photocatalytic performance, which is 2.72 and 4.52 times compared to deficient oxygen vacancies Bi12O17Cl2 (DOV Bi12O17Cl2) and Bulk Bi12O17Cl2 for colored organic pollutants degradation, respectively. Besides, the ROV Bi12O17Cl2 also displays excellent removal efficiency for refractory antibiotics, roughly 4.00 and 7.45 times compared to that of DOV Bi12O17Cl2 and Bulk Bi12O17Cl2, respectively. Furthermore, the intermediates for photocatalytic degradation were determined through HPLC-MS and the possible degradation paths of the target molecules were inferred. Capture experiment and ESR spectra confirmed that the â¢O2- played a vital role for the organic pollutant degradation. This work provides a new perspective for the design of advanced semiconductors for organic pollutants degradation.
Assuntos
Poluentes Ambientais , Oxigênio , Antibacterianos , LuzRESUMO
Owing to the exorbitant CO2 activation energy and unsatisfactory photogenerated charge separation efficiency, CO2 photoconversion still faces enormous challenges. In this study, a directional electron transfer channel has been established by decorating N-doped carbon quantum dots (N-CQDs) on the surface of Bi4MoO9 nanoparticles to ensure that more active electrons can participate in the CO2 reduction. The conduction band of Bi4MoO9 nanoparticles is calculated to be -1.55 eV versus the normal hydrogen electrode (NHE), pH = 7, which is negative enough to attain the photocatalytic CO2 reduction potential of -0.53 eV versus NHE, pH = 7. CO2 adsorption curves and in situ Fourier transform infrared spectra reveal that N-CQDs facilitate surface CO2 adsorption and activation, as well as CO desorption. In addition, steady-state photoluminescence and photoelectrochemical tests prove that the charge separation efficiency can be greatly enhanced by constructing N-CQDs/Bi4MoO9 composites. In the presence of pure water, N-CQDs/Bi4MoO9-2 composite achieved a CO yield of 16.22 µmol g-1 after 5 h Xe light illumination, which was 3.24 times higher than that of pure Bi4MoO9 (4.98 µmol g-1). This study offers a distinctive approach to the optimization of Bi4MoO9 photocatalysts and their application in energy conversion.
RESUMO
Endowing a semiconductor with tunable edge active sites will effectively enhance catalytic performance. Herein, an edge-site-rich ordered macroporous BiOCl (BiOCl-P) with abundant dangling bonds is constructed via the colloidal crystal template method. The edge-site-rich ordered macroporous structure provides abundant adsorption sites for CO2 molecules, as well as forms numerous localized electron enrichment areas, accelerating charge transfer. DFT calculations reveal that the dangling bonds-rich configuration can effectively reduce the CO2 activation energy barrier, boost the CO double bond dissociation, and facilitate the proton electron coupling reaction. As a result, the BiOCl-P achieves a higher CO and CH4 generation rate of 78.07 and 3.03 µmol g-1 under 4 h Xe lamp irradiation in a solid-gas system. Finally, the CO2 molecules' conversion process is further investigated by in situ Fourier-transform infrared spectroscopy. This work realizes a new avenue toward the design of vibrant semiconductors on the nanoscale to boost inert CO2 photoreduction.
Assuntos
Dióxido de Carbono , Semicondutores , Adsorção , Catálise , ElétronsRESUMO
The introduction of subnanometer clusters as active sites on the surface of photocatalysts for efficiently tuning the selectivity and activity of the photocatalyts is still a challenge. Herein, the subnanometer Ag/AgCl clusters were incorporated on atomically thin defective Bi12O17Cl2 nanosheets via rebinding with unsaturated Cl atoms. Benefiting from the surficial Bi vacancies (VBi) and Bi-O vacancies (VBi-O) in this atomically thin architecture, the local atomic arrangement was tuned so that the subnanometer Ag/AgCl clusters were successfully incorporated. An enhancement of photocatalytic activity for NO removal was achieved in which the activity is 3 times higher than that of Bi12O17Cl2 and 1.8 times higher than that of defective Bi12O17Cl2. The substitution of the active sites from surficial VBi and VBi-O to be subnanometer Ag/AgCl clusters enables a tunable redox potential and different reaction mechanisms in NO removal. Moreover, the selectivity of the photoinduced redox reaction on NO oxidation and CO2 reduction was achieved via introducing an extra energy level.
RESUMO
The fabrication of high-performance and stable electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of importance for sustainable water-splitting technologies. Herein, the cobalt (Co) nanoparticles and molybdenum carbide (Mo2C) heterostructures anchored N-doped carbon (Co/Mo2C@NC-800) was designed as bifunctional electrocatalyst for overall water splitting via a simple pyrolysis approach for metal organic frameworks (MOFs) precursor. This composite shows a remarkable performance for HER and OER with a small overpotential of 121 mV and 311 mV at 10 mA cm-2, respectively. When the optimized electrocatalyst was employed as both anode and cathode for overall water splitting in a two-electrode system, the electrolyzer achieves a low cell voltage of 1.67 V at 10 mA cm-2 in 1 M KOH, as well as a superior and stable long-time operation of 30 h. The promising hybrid material demonstrates excellent electrocatalysis performance due to effective combination of the best of both worlds: Mo2C with remarkable HER performance and Co nanoparticles with excellent OER activity. The Mo2C possesses strong hydrogen binding energy and Co exhibits prominent electrical conductivity, thus the construction of heterostructures achieves more active sites with different functions and significantly boosts HER and OER process. The novel and effective synthesis strategy provides new insights into the design of outstanding non-noble metal bifunctional electrocatalysts for overall water splitting.
RESUMO
Ultrathin BiOBr nanosheets have been prepared via an ionic liquid induced mechanochemical synthesis method at ambient temperature for the first time using 1-hexadecyl-3-methy-limidazolium bromine ([C16mim]Br). Transmission electron microscope and atomic force microscope images show that the ultrathin BiOBr nanosheets possessed an average diameter of approximately 200-300 nm with a thickness of 3-4 nm. For comparison, KBr was selected as Br source for the preparation of BiOBr nanosheets and the experimental results demonstrate that the ionic liquid and mechanical ball milling method had a significant impact on the fabrication of nanosheet structures. Compared with the as-prepared control samples, the ultrathin BiOBr nanosheet photocatalyst exhibited significantly increased photocatalytic performance for the removal of organic pollutants. A possible mechanism for this enhanced activity was proposed based on the shorter diffusion distance for charge transfer provided by the ultrathin nanosheet structure, which inhibits the recombination of photogenerated charge carriers. This work not only opens up a possible pathway for the large-scale industrial preparation of BiOX (X = Cl, Br, I) with superior photocatalytic activity, but also provides new insight into environmental restoration and energy conversion.
RESUMO
Ultrathin MoS2 nanosheet hybridized Bi5O7I (MoS2/Bi5O7I) nanorods were synthesized via a reactable ionic liquid assisted solvothermal process for the first time. The photocatalytic activity of MoS2/Bi5O7I nanorods was determined by photodegrading bisphenol A (BPA), tetracycline hydrochloride (TC) and ciprofloxacin (CIP) under visible light irradiation. Experimental results showed that MoS2/Bi5O7I owned the excellent photocatalytic properties and photostability. The efficient visible light driven photocatalytic performance was due to a larger specific surface area of MoS2, which increased the close interfacial contact between pollutants and photocatalysts. Meanwhile, the introduction of ultrathin MoS2 nanosheet was conducive to the separation and utilization of photoinduced charge carriers, thus further suppressed high recombination rate in pure Bi5O7I nanorods. Moreover, a possible charge transfer path in MoS2/Bi5O7I composite material was also put forward.
RESUMO
Ciprofloxacin (CIP) as a typical antibiotic is widely used to produce antimicrobial drugs. Determination of CIP has raised extensive concern due to its possible toxic effects on human health. Here, a simple photoelectrochemical (PEC) sensor for detecting CIP has been developed by using the nitrogen-deficient graphitic carbon nitride (ND-g-CN) as a PEC active material. The ND-g-CN material exhibits two-dimension (2D) thin sheet structure with abundant nitrogen vacancies. The 2D thin sheet structure can enable the effective charge separation and transfer, thus dramatically improving the PEC performance. Simultaneously, nitrogen vacancies can serve as charge trap to efficiently inhibit the charge recombination. Furthermore, the synergistic effect of the two can widen the absorption edge and decrease the band gap of ND-g-CN material, resulting in increasing light harvesting and enhancing PEC performance. CIP can be oxidized by the holes of ND-g-CN, thus realizing effective charge separation, which can result in the amplification of the photocurrent. The designed PEC sensor demonstrated a wide detection range from 60 to 19090â¯ngâ¯L-1 and a low detection limit of 20â¯ngâ¯L-1 for CIP assay. This strategy broadens the application of graphitic carbon nitride (g-CN) material in PEC field and presents a promising potential for the practical application in the environmental monitoring.
Assuntos
Antibacterianos/análise , Ciprofloxacina/análise , Técnicas Eletroquímicas/métodos , Grafite/química , Compostos de Nitrogênio/química , Nitrogênio/química , Animais , Elétrons , Contaminação de Alimentos/análise , Luz , Limite de Detecção , Leite/química , Esgotos/análise , Poluentes Químicos da Água/análiseRESUMO
Surface defects in semiconductors have a significant role to tune the photocatalytic reactions. However, the dominant studied defect type is oxygen vacancy, and metal cation vacancies are seldom explored. Herein, bismuth vacancies are engineered into BiOBr through ultrathin structure control and employed to tune photocatalytic CO2 reduction. VBi-BiOBr ultrathin nanosheets deliver a high selective CO generation rate of 20.1 µmol g-1 h-1 in pure water, without any cocatalyst, photosensitizer, and sacrificing reagent, roughly 3.8 times higher than that of BiOBr nanosheets. The increased CO2 reduction activity is ascribed to the tuned electronic structure, optimized CO2 adsorption, activation, and CO desorption process over VBi-BiOBr ultrathin nanosheets. This work offers new opportunities for designing surface metal vacancies to optimize the CO2 photoreduction performances.
RESUMO
An ultra-thin carbon nitride with loose structure and more carbon defects on the surface was achieved through high-temperature peeling methods. Its composition, morphological characteristics, surface defect types and electrochemical properties have been measured. After atomic scale structure control and surface defects construction, the photocatalytic activity of prepared g-C3N4-V for ammonia conversion from dinitrogen can be greatly improved in contrast with bulk g-C3N4. Under visible light irradiation, the defective g-C3N4-V can produce 54⯵mol/L NH3 within 100â¯min without any cocatalyst and sacrificial agent. The relationship between morphology characteristics and activity of defective ultrathin g-C3N4 materials was analyzed in detail. Benefiting from thin layer structure and more surface carbon vacancies, the effective charge separation from both bulk and surface can be achieved. Notably, the engineered carbon vacancies greatly facilitate the adsorption and activation of dinitrogen molecule, extremely improving the nitrogen fixation activity for the defective ultrathin g-C3N4-V materials. This work affords novel insights into the design of photocatalyst with defective ultrathin structure towards nitrogen fixation.