Effects of Panax notoginseng Saponins Encapsulated by Polymerized Whey Protein on the Rheological, Textural and Bitterness Characteristics of Yogurt.

Panax notoginseng saponins (PNSs) have been used as a nutritional supplement for many years, but their bitter taste limits their application in food formulations. The effects of PNS (groups B, C, and D contained 0.8, 1.0 and 1.2 mg/mL of free PNS, respectively) or Panax notoginseng saponin-polymerized whey protein (PNS-PWP) nanoparticles (groups E, F, and G contained 26.68, 33.35 and 40.03 mg/mL of PNS-PWP nanoparticles, respectively) on the rheological, textural properties and bitterness of yogurt were investigated. Group G yogurt showed a shorter gelation time (23.53 min), the highest elastic modulus (7135 Pa), higher hardness (506 g), higher apparent viscosity, and the lowest syneresis (6.93%) than other groups, which indicated that the yogurt formed a stronger gel structure. The results of the electronic tongue indicated that the bitterness values of group E (-6.12), F (-6.56), and G (-6.27) yogurts were lower than those of group B (-5.12), C (-4.31), and D (-3.79), respectively, which might be attributed to PNS being encapsulated by PWP. The results indicated that PWP-encapsulated PNS could cover the bitterness of PNS and improve the quality of yogurt containing PNS.

Production of a Strain-Measuring Device with an Improved 3D Printer.

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in the analog electrical signal in a traditional strain gauge operation, a new strain measurement method is presented here. It uses a photographic technique to display the strain change by amplifying the change of the pointer displacement of the mechanism. A visual polydimethylsiloxane (PDMS) lens with a focal length of 7.16 mm was added to a smartphone camera to generate a lens group acting as a microscope to capture images. It had an equivalent focal length of 5.74 mm. Acrylonitrile butadiene styrene (ABS) and nylon amplifiers were used to test the influence of different materials on the sensor performance. The production of the amplifiers and PDMS lens is based on improved 3D printing technology. The data obtained were compared with the results from finite element analysis (FEA) to verify their validity. The sensitivity of the ABS amplifier was 36.03 ± 1.34 µÎµ/µm, and the sensitivity of the nylon amplifier was 36.55 ± 0.53 µÎµ/µm.