Rewritable printing of ionic liquid nanofilm utilizing focused ion beam induced film wetting.

Manipulating liquid flow over open solid substrate at nanoscale is important for printing, sensing, and energy devices. The predominant methods of liquid maneuvering usually involve complicated surface fabrications, while recent attempts employing external stimuli face difficulties in attaining nanoscale flow control. Here we report a largely unexplored ion beam induced film wetting (IBFW) technology for open surface nanofluidics. Local electrostatic forces, which are generated by the unique charging effect of Helium focused ion beam (HFIB), induce precursor film of ionic liquid and the disjoining pressure propels and stabilizes the nanofilm with desired patterns. The IBFW technique eliminates the complicated surface fabrication procedures to achieve nanoscale flow in a controllable and rewritable manner. By combining with electrochemical deposition, various solid materials with desired patterns can be produced.

Wet Etching of Silicon in Planar Nanochannels.

Silicon (Si) alkaline etching constitutes a fundamental process in the semiconductor industry. Although its etching kinetics on plain substrates have been thoroughly investigated, the kinetics of Si wet etching in nanoconfinements have yet to be fully explored despite its practical importance in three-dimensional (3-D) semiconductor manufacturing. Herein, we report the systematic study of potassium hydroxide (KOH) wet etching kinetics of amorphous silicon (a-Si)-filled two-dimensional (2-D) planar nanochannels. Our findings reveal that the etching rate would increase with the increase in nanochannel height before reaching a plateau, indicating a strong nonlinear confinement effect. Through investigation using etching solutions with different ionic strengths and/or different temperatures, we further find that both electrostatic interactions and the hydration layer inside the nanoconfinement contribute to the confinement-dependent etching kinetics. Our results offer fresh perspectives into the kinetic study of reactions in nanoconfinements and will shed light on the optimization of etching processes in the semiconductor industry.

[Effects of electroacupuncture on gait and proliferation and differentiation of muscle satellite cell in rats with acute blunt trauma of gastrocnemius muscle].

OBJECTIVE: To observe the effects of electroacupuncture on threshold of pain, gait, proliferation and differentiation of muscle satellite cell in rats with acute blunt trauma of gastrocnemius muscle, and to explore the possible mechanism of electroacupuncture in promoting the repair of acute injury of skeletal muscle. METHODS: A total of 48 SD rats were randomly divided into a blank group (6 rats), a model group (24 rats) and an electroacupuncture group (18 rats). In the model group and the electroacupuncture group, the model of acute blunt trauma of gastrocnemius muscle was established by self-made impactor. In the electroacupuncture group, electroacupuncture was applied at "Chengshan" (BL 57) and "Yanglingquan" (GB 34) on the right side, with disperse-dense wave, in frequency of 2 Hz/100 Hz, once a day, 30 min each time. Electroacupuncture intervention was performed for 3, 7 and 14 days according to the sampling time. On the 1st, 3rd, 7th and 14th days after modeling, the mechanical withdrawal pain threshold of hindfoot was detected by Von Frey method; the standing time and the maximum contact area of the right hindfoot were recorded by Cat Walk XTTM animal gait analysis instrument; the morphology of the right gastrocnemius muscle and the number of inflammatory cells were observed by HE staining; the positive expression of paired box gene 7 (Pax7) and myogenic differentiation (MyoD) of the right gastrocnemius muscle was detected by immunofluorescence. RESULTS: After modeling, the muscle fiber rupture and massive infiltration of red blood cells and inflammatory cells were observed in the right gastrocnemius muscle; after electroacupuncture intervention, the morphology of muscle fiber was intact and the infiltration of inflammatory cells was improved. Compared with the blank group, in the model group, the differences of mechanical withdrawal pain threshold between the left and right foot were increased (P<0.05), the standing time was shortened and the maximum contact area of the right hindfoot was decreased (P<0.05), the number of inflammatory cells and the positive expression of Pax7 and MyoD of the right gastrocnemius muscle were increased (P<0.05) on the 1st, 3rd, 7th and 14th days after modeling. Compared with the model group, in the electroacupuncture group, the differences of mechanical withdrawal pain threshold were decreased (P<0.05), the standing time was prolonged (P<0.05), the number of inflammatory cells of right gastrocnemius muscle was decreased (P<0.05) on the 7th and 14th days after modeling; the maximum contact area of the right hindfoot was increased (P<0.05), the positive expression of MyoD of the right gastrocnemius muscle was increased (P<0.05) on the 3rd, 7th and 14th days after modeling; the positive expression of Pax7 of the right gastrocnemius muscle was increased (P<0.05) on the 3rd day after modeling. CONCLUSION: Electroacupuncture can effectively improve the pain threshold and gait in rats with acute blunt trauma of gastrocnemius muscle, and promote the repair of skeletal muscle injury, the mechanism may be related to the up-regulation of Pax7 and MyoD, so as to promoting the proliferation and differentiation of muscle satellite cell.

Inverse design of a near-infrared metalens with an extended depth of focus based on double-process genetic algorithm optimization.

Metalens with extended depth of focus (EDOF) can extend the mapping area of the image, which leads to novel applications in imaging and microscopy. Since there are still some disadvantages for existing EDOF metalenses based on forward design, such as asymmetric point spread function (PSF) and non-uniformly distributed focal spot, which impair the quality of images, we propose a double-process genetic algorithm (DPGA) optimization to inversely design the EDOF metalens for addressing these drawbacks. By separately adopting different mutation operators in successive two genetic algorithm (GA) processes, DPGA exhibits significant advantages in searching for the ideal solution in the whole parameter space. Here, the 1D and 2D EDOF metalenses operating at 980 nm are separately designed via this method, and both of them exhibit significant depth of focus (DOF) improvement to that of conventional focusing. Furthermore, a uniformly distributed focal spot can be maintained well, which can guarantee stable imaging quality along the longitudinal direction. The proposed EDOF metalenses have considerable potential applications in biological microscopy and imaging, and the scheme of DPGA can be promoted to the inverse design of other nanophotonics devices.

Multispectral camouflage nanostructure design based on a particle swarm optimization algorithm for color camouflage, infrared camouflage, laser stealth, and heat dissipation.

With the development of camouflage technology, single camouflage technology can no longer adapt to existing environments, and multispectral camouflage has attracted much research focus. However, achieving camouflage compatibility across different bands remains challenging. This study proposes a multispectral camouflage metamaterial structure using a particle swarm optimization algorithm, which exhibits multifunctional compatibility in the visible and infrared bands. In the visible band, the light absorption rate of the metamaterial structure exceeds 90%. In addition, color camouflage can be achieved by modifying the top cylindrical nanostructure to display different colors. In the infrared band, the metamaterial structure can achieve three functions: dual-band infrared camouflage (3-5 µm and 8-14 µm), laser stealth (1.06, 1.55, and 10.6 µm), and heat dissipation (5-8 µm). This structure exhibits lower emissivity in both the 3-5-µm (ɛ=0.18) and 8-14-µm (ɛ=0.27) bands, effectively reducing the emissivity in the atmospheric window band. The structure has an absorption rate of 99.7%, 95.5%, and 95% for 1.06, 1.55, and 10.6 µm laser wavelengths, respectively. Owing to its high absorptivity, laser stealth is achieved. Simultaneously, considering the heat dissipation requirements of metamaterial structures, the structural emissivity is 0.7 in the non-atmospheric window (5-8 µm), and the heat can be dissipated through air convection. Therefore, the designed metamaterial structure can be used in military camouflage and industrial applications.

Ultrafast Diameter-Dependent Water Evaporation from Nanopores.

Evaporation from nanopores plays an important role in various natural and industrial processes that require efficient heat and mass transfer. The ultimate performance of nanopore-evaporation-based processes is dictated by evaporation kinetics at the liquid-vapor interface, which has yet to be experimentally studied down to the single nanopore level. Here we report unambiguous measurements of kinetically limited intense evaporation from individual hydrophilic nanopores with both hydrophilic and hydrophobic top outer surfaces at 22 °C using nanochannel-connected nanopore devices. Our results show that the evaporation fluxes of nanopores with hydrophilic outer surfaces show a strong diameter dependence with an exponent of nearly -1.5, reaching up to 11-fold of the maximum theoretical predication provided by the classical Hertz-Knudsen relation at a pore diameter of 27 nm. Differently, the evaporation fluxes of nanopores with hydrophobic outer surfaces show a different diameter dependence with an exponent of -0.66, achieving 66% of the maximum theoretical predication at a pore diameter of 28 nm. We discover that the ultrafast diameter-dependent evaporation from nanopores with hydrophilic outer surfaces mainly stems from evaporating water thin films outside of the nanopores. In contrast, the diameter-dependent evaporation from nanopores with hydrophobic outer surfaces is governed by evaporation kinetics inside the nanopores, which indicates that the evaporation coefficient varies in different nanoscale confinements, possibly due to surface-charge-induced concentration changes of hydronium ions. This study enhances our understanding of evaporation at the nanoscale and demonstrates great potential of evaporation from nanopores.

Design, synthesis, and structure-activity relationships of 2-benzylidene-1-indanone derivatives as anti-inflammatory agents for treatment of acute lung injury.

PURPOSE: The purpose of this study was to design and synthesize novel 2-benzylidene-1-indanone derivatives for treatment of acute lung injury. METHODS: A series of 39 novel 2-benzylidene-indanone structural derivatives were synthesized and evaluated for anti-inflammatory activity in lipopolysaccharide (LPS)-stimulated murine primary macrophages. RESULTS: Most of the obtained compounds effectively inhibited the LPS-induced expression of IL-6 and TNF-α. The most active compound, 8f, was found to significantly reduce LPS-induced pulmonary inflammation, as reflected by reductions in the concentration of total protein, inflammatory cell count, as well as the lung wet/dry ratio in bronchoalveolar lavage (BAL) fluid. Furthermore, 8f effectively inhibited mRNA expression of several inflammatory cytokines after LPS challenge in vitro and in vivo. Administration of 8f also blocked LPS-induced activation of the proinflammatory NF-κB/MAPK signaling pathway. CONCLUSION: The simple synthetic preparation and biological properties of these derivatives make these 2-benzylidene-indanone scaffolds promising new entities for the development of anti-inflammatory therapeutics for the treatment of acute lung injury.

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications.

Microfluidic devices are versatile tools for studying transport processes at a microscopic scale. A demand exists for microfluidic devices that are resistant to low molecular-weight oil components, unlike traditional polydimethylsiloxane (PDMS) devices. Here, we demonstrate a facile method for making a device with this property, and we use the product of this protocol for examining the pore-scale mechanisms by which foam recovers crude oil. A pattern is first designed using computer-aided design (CAD) software and printed on a transparency with a high-resolution printer. This pattern is then transferred to a photoresist via a lithography procedure. PDMS is cast on the pattern, cured in an oven, and removed to obtain a mold. A thiol-ene crosslinking polymer, commonly used as an optical adhesive (OA), is then poured onto the mold and cured under UV light. The PDMS mold is peeled away from the optical adhesive cast. A glass substrate is then prepared, and the two halves of the device are bonded together. Optical adhesive-based devices are more robust than traditional PDMS microfluidic devices. The epoxy structure is resistant to swelling by many organic solvents, which opens new possibilities for experiments involving light organic liquids. Additionally, the surface wettability behavior of these devices is more stable than that of PDMS. The construction of optical adhesive microfluidic devices is simple, yet requires incrementally more effort than the making of PDMS-based devices. Also, though optical adhesive devices are stable in organic liquids, they may exhibit reduced bond-strength after a long time. Optical adhesive microfluidic devices can be made in geometries that act as 2-D micromodels for porous media. These devices are applied in the study of oil displacement to improve our understanding of the pore-scale mechanisms involved in enhanced oil recovery and aquifer remediation.

Destabilization, Propagation, and Generation of Surfactant-Stabilized Foam during Crude Oil Displacement in Heterogeneous Model Porous Media.

Foam flooding in porous media is of increasing interest due to its numerous applications such as enhanced oil recovery, aquifer remediation, and hydraulic fracturing. However, the mechanisms of oil-foam interactions have yet to be fully understood at the pore level. Here, we present three characteristic zones identified in experiments involving the displacement of crude oil from model porous media via surfactant-stabilized foam, and we describe a series of pore-level dynamics in these zones which were not observed in experiments involving paraffin oil. In the displacement front zone, foam coalesces upon initial contact with crude oil, which is known to destabilize the liquid lamellae of the foam. Directly upstream, a transition zone occurs where surface wettability is altered from oil-wet to water-wet. After this transition takes place, a strong foam bank zone exists where foam is generated within the porous media. We visualized each zone using a microfluidic platform, and we discuss the unique physicochemical phenomena that define each zone. In our analysis, we also provide an updated mechanistic understanding of the "smart rheology" of foam which builds upon simple "phase separation" observations in the literature.

Geometry-Dependent Drying in Dead-End Nanochannels.

Liquid drying in nanoporous media is a key process in food, textile, oil and energy industries, but the corresponding kinetics remains poorly understood due to the structural complexity of nanoporous media. Here, we directly observe the drying process and study drying kinetics in single two-dimensional (2-D) nanochannels with height ranging from 29 to 122 nm. Two different drying behaviors are discovered in such nanoconfinements: continuous meniscus receding and discontinuous meniscus receding due to liquid bridge formation ahead of the meniscus, albeit similar drying rates. The geometry dependence of the measured drying rates is studied at different humidities and compared with a theoretical model considering liquid corner flow, liquid thin film flow, and vapor diffusion as contributors to the overall drying rates. Individual contributions from vapor and liquid transport inside the nanochannels to the drying kinetics are decoupled, and the water vapor diffusivity is successfully extracted. Our results show that both corner flow and vapor diffusion play important roles on water drying in nanochannels without sharp corners. Our findings further indicate that water vapor diffusion in nanoscale confinements can still be described by the classic Knudsen diffusion theory. These results provide new insights of liquid drying in nanoporous media and have implication in optimizing drying processes in industrial applications.

Design, Synthesis, and Structure-Activity Relationship Analysis of Thiazolo[3,2-a]pyrimidine Derivatives with Anti-inflammatory Activity in Acute Lung Injury.

Acute lung injury (ALI) has a high lethality rate, and interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) contribute most to tissue deterioration in cases of ALI. In this study, we designed and synthesized a new series of thiazolo[3,2-a]pyrimidine derivatives based on a previously identified lead compound, and we evaluated their anti-inflammatory activities. Structure-activity relationship studies led to the discovery of two highly potent inhibitors. The two promising compounds were found to inhibit lipopolysaccharide (LPS)-induced IL-6 and TNF-α release in a dose-dependent manner in mouse primary peritoneal macrophages (MPMs). Furthermore, administration of these compounds resulted in lung histopathological improvements and attenuated LPS-induced ALI in vivo. Taken together, these data indicate that these novel thiazolo[3,2-a]pyrimidine derivatives could be developed as candidate drugs for the treatment of ALI.