Influence of Ag Metal Dispersion on the Catalyzed Reduction of CO2 into Chemical Fuels over Ag-ZrO2 Catalysts.

Metal/metal oxide catalysts reveal unique CO2 adsorption and hydrogenation properties in CO2 electroreduction for the synthesis of chemical fuels. The dispersion of active components on the surface of metal oxide has unique quantum effects, significantly affecting the catalytic activity and selectivity. Catalyst models with 25, 50, and 75% Ag covering on ZrO2, denoted as Ag4/(ZrO2)9, Ag8/(ZrO2)9, and Ag12/(ZrO2)9, respectively, were developed and coupled with a detailed investigation of the electronic properties and electroreduction processes from CO2 into different chemical fuels using density functional theory calculations. The dispersion of Ag can obviously tune the hybridization between the active site of the catalyst and the O atom of the intermediate species CH3O* derived from the reduction of CO2, which can be expected as the key intermediate to lead the reduction path to differentiation of generation of CH4 and CH3OH. The weak hybridization between CH3O* and Ag4/(ZrO2)9 and Ag12/(ZrO2)9 favors the further reduction of CH3O* into CH3OH. In stark contrast, the strong hybridization between CH3O* and Ag8/(ZrO2)9 promotes the dissociation of the C-O bond of CH3O*, thus leading to the generation of CH4. Results provide a fundamental understanding of the CO2 reduction mechanism on the metal/metal oxide surface, favoring novel catalyst rational design and chemical fuel production.

CaO-Assisted Alkaline Liquid Waste Drives Corn Stalk Chemical Looping Gasification for Hydrogen Production.

The chemical looping gasification (CLG) process is a promising pathway to produce hydrogen-enriched syngas with biomass. It is urgent to enhance the reactivity and thermal stability of oxygen carriers (OC) and capture the inherently separated CO2. This work presents the strategy of simultaneous modification of a Fe2O3/Al2O3 oxygen carrier and the supplement of an oxidant for corn stalk chemical looping gasification by introducing KNO3-containing ethanol liquid waste. CaO is employed to capture the generated CO2 and promote the reaction balance toward hydrogen production in a fuel reactor (FR). The highest carbon conversion reaction rate of 1.1 × 10-4 mol/g could be obtained at the ratio of CaO to fuel carbon and the reaction temperature of 1.5 and 600 °C, respectively. The kinetics and thermodynamics analyses under the optimized condition are further discussed to verify the possibility and high efficiency of using alkaline organic liquid waste to boost solid fuel gasification for hydrogen production. This CLG strategy shows multifunctional merits, including organic liquid waste treatment, biomass CLG promotion, and hydrogen production enhancement.

Preparation and characterization of bio-oils from internally circulating fluidized-bed pyrolyses of municipal, livestock, and wood waste.

Fast pyrolyses of sewage sludge (SS), pig compost (PC), and wood chip (WC) were investigated in an internally circulating fluidized-bed to evaluate bio-oil production. The pyrolyses were performed at 500 °C and the bio-oil yields from SS, PC, and WC were 45.2%, 44.4%, and 39.7% (dried and ash-free basis), respectively. The bio-oils were analyzed with an elemental analyzer, Karl-Fischer moisture titrator, bomb calorimeter, Fourier transformation infrared spectrometer, gel permeation chromatograph, and gas chromatography/mass spectrometry. The results show that the bio-oil from SS is rich in aliphatic and organonitrogen species, while the bio-oil from PC exhibits higher caloric value due to its higher carbon content and lower oxygen content in comparison with that from SS. The bio-oils from SS and PC have similar chemical composition of organonitrogen species. Most of the compounds detected in the bio-oil from WC are organooxygen species. Because of its high oxygen content, low H/C ratio, and caloric value, the bio-oil from WC is unfeasible for use as fuel feedstock, but possible for use as chemical feedstock.

Two-stage steam gasification of waste biomass in fluidized bed at low temperature: parametric investigations and performance optimization.

Steam gasification of waste biomass has been studied in a two-stage fluidized bed reactor, which has the primary pyrolysis fluidized bed using silica sand as bed material and the secondary reforming fixed bed with catalyst. The main objectives are parametric investigation and performance improvement especially at low temperature of around 600 °C using the wood chip and the pig manure compost as feedstock. Main operating variables studied are pyrolysis temperature, catalytic temperature, steam/biomass-C ratio, space velocity and different catalyst. Reaction temperatures and steam/C ratio have important role on the gasification process. About 60 vol.% H2 (dry and N2 free) and about 2.0 Nm3/kg biomass (dry and ash free basis) can be obtained under good conditions. Compared to Ni/Al2O3, Ni/BCC (Ni-loaded brown coal char) has a better ability and a hopeful prospect for the stability with coking resistance.

Triacetonamine formation in a bio-oil from fast pyrolysis of sewage sludge using acetone as the absorption solvent.

A sewage sludge sample was pyrolyzed in a drop tube furnace at 500 degrees C and sweeping gas flow rate of 300cm(3)/min. Triacetonamine (TAA) was detected with GC/MS as major component in the resulting bio-oil using acetone as the absorption solvent and proven to be a product from the reaction of NH(3) in the bio-oil with the absorption solvent acetone. TAA yield increased with storage time and reached a level about 28.4% (% sludge fed, daf) after 175h. Since the reaction of pure NH(3) with acetone does not proceed, some species in the bio-oil must catalyze the reaction of NH(3) with acetone. TAA was isolated in a high yield (27.9%, daf) and high purity (80.4%) by column chromatography with different solvents, including mixed solvents, as eluants. The study revealed the possibility of sewage sludge as potential resource of TAA.