Sample Size Determination and Study Design Impact on Dose-Scale Pharmacodynamic Bioequivalence: a Case Study Using Orlistat.

Dose-scale pharmacodynamic bioequivalence is recommended for evaluating the consistency of generic and innovator formulations of certain locally acting drugs, such as orlistat. This study aimed to investigate the standard methodology for sample size determination and the impact of study design on dose-scale pharmacodynamic bioequivalence using orlistat as the model drug. A population pharmacodynamic model of orlistat was developed using NONMEM 7.5.1 and utilized for subsequent simulations. Three different study designs were evaluated across various predefined relative bioavailability ratios of test/reference (T/R) formulations. These designs included Study Design 1 (2×1 crossover with T1 60 mg, R1 60 mg, and R2 120 mg), Study Design 2 (2×1 crossover with T2 120 mg, R1 60 mg, and R2 120 mg), and Study Design 3 (2×2 crossover with T1 60 mg, T2 120 mg, R1 60 mg, and R2 120 mg). Sample sizes were determined using a stochastic simulation and estimation approach. Under the same T/R ratio and power, Study Design 3 required the minimum sample size for bioequivalence, followed by Study Design 1, while Study Design 2 performed the worst. For Study Designs 1 and 3, a larger sample size was needed on the T/R ratio < 1.0 side for the same power compared to that on the T/R ratio > 1.0 side. The opposite asymmetry was observed for Study Design 2. We demonstrated that Study Design 3 is most effective for reducing the sample size for orlistat bioequivalence studies, and the impact of T/R ratio on sample size shows asymmetry.

Physiologically based pharmacokinetic modelling of cefoperazone in paediatrics.

AIMS: Cefoperazone is commonly used off-label in the treatment of bacterial meningitis and sepsis in children, and the pharmacokinetic (PK) data are limited in this vulnerable population. The goal of this study was to develop a physiologically based pharmacokinetic (PBPK) model to predict pediatric cefoperazone exposure for rational dosing recommendations. METHODS: A cefoperazone PBPK model for adults was first constructed using Simcyp V22 simulator. Subsequently, the model was extended to children based on the built in age-dependent physiological parameters, while the drug characteristics remained unchanged. The verified pediatric PBPK model was then utilized to assess the rationality of the common dosing regimens for children at different age groups. RESULTS: Cefoperazone PBPK model included elimination via biliary excretion, glomerular filtration, and organic anion transporter 3 (OAT3)-mediated tubular secretion. 95.2% of the observed mean concentrations and 100% of the area under the plasma drug concentration-time curve (AUC) and peak concentration (Cmax) in adults were within a twofold range of model mean predictions. Good predictive accuracy was also observed in children, including neonates. 50 mg/kg q12h cefoperazone demonstrated effective target attainment in virtual term neonates (<1 month) when the MIC was ≤1 mg/L, adhering to the stringent PK/PD target of 75% fT > MIC. 37.5 mg/kg q12h cefoperazone achieved the common 50% fT > MIC target for an MIC ≤ 0. 25 mg/L in virtual pediatric patients ranging from 1 month to 18 years of age. CONCLUSIONS: A pediatric PBPK model was developed for cefoperazone, and it could serve as the basis for deriving rational dosing regimens in children.

Evaluation of Various Approaches to Estimate Transplacental Clearance of Vancomycin for Predicting Fetal Concentrations using a Maternal-Fetal Physiologically Based Pharmacokinetic Model.

BACKGROUND: Evaluating drug transplacental clearance is vital for forecasting fetal drug exposure. Ex vivo human placenta perfusion experiments are the most suitable approach for this assessment. Various in silico methods are also proposed. This study aims to compare these prediction methods for drug transplacental clearance, focusing on the large molecular weight drug vancomycin (1449.3 g/mol), using maternal-fetal physiologically based pharmacokinetic (m-f PBPK) modeling. METHODS: Ex vivo human placenta perfusion experiments, in silico approaches using intestinal permeability as a substitute (quantitative structure property relationship (QSPR) model and Caco-2 permeability in vitro-in vivo correlation model) and midazolam calibration model with Caco-2 scaling were assessed for determining the transplacental clearance (CLPD) of vancomycin. The m-f PBPK model was developed stepwise using Simcyp, incorporating the determined CLPD values as a crucial input parameter for transplacental kinetics. RESULTS: The developed PBPK model of vancomycin for non-pregnant adults demonstrated excellent predictive performance. By incorporating the CLPD parameterization derived from ex vivo human placenta perfusion experiments, the extrapolated m-f PBPK model consistently predicted maternal and fetal concentrations of vancomycin across diverse doses and distinct gestational ages. However, when the CLPD parameter was derived from alternative prediction methods, none of the extrapolated maternal-fetal PBPK models produced fetal predictions in line with the observed data. CONCLUSION: Our study showcased that combination of ex vivo human placenta perfusion experiments and m-f PBPK model has the capability to predict fetal exposure for the large molecular weight drug vancomycin, whereas other in silico approaches failed to achieve the same level of accuracy.

Nonlinear Pharmacokinetics of Topical Flurbiprofen Gel in a Phase I Study Among Chinese Healthy Adults.

INTRODUCTION: PDX-02 (Flurbiprofen sodium) is a topical nonsteroidal anti-inflammatory drug in gel formulation for local analgesia and anti-inflammation. A Phase I clinical trial was conducted to assess the safety, tolerability, and pharmacokinetics of single and multiple doses of PDX-02 gel in Chinese healthy adults. METHODS: The trial comprised three parts: (1) a single-dose ascending study with three dose levels (0.5%, 1% to 2% PDX-02 gel) applied on a 136 cm2 skin area; (2) a multiple-dose study with either 1% or 2% PDX-02 gel applied on a 136 cm2 skin area for 7 consecutive days; and (3) a high dose group with 2% PDX-02 gel on an 816 cm2 skin area and a frequent multiple dose group with 2% PDX-02 gel on a 272 cm2 skin area four times a day for 7 consecutive days. The safety, tolerability and pharmacokinetics of the PDX-02 gel were evaluated in each part. RESULTS: A total of sixty participants completed the trial, with all adverse events recovered and all positive skin reaction being transient and recovered. The overall absorption of topical PDX-02 gel was slow with a mean peak time exceeding 9 h. The elimination rate remained consistent between dose groups. A less-than-dose-proportional nonlinear pharmacokinetics relationship was observed within the studied dose range, and this is likely due to the autoinduction of skin first-pass metabolism. CONCLUSION: The topical PDX-02 gel showed favorable safety and tolerability in both single and multiple dosing studies, with a less-than-dose-proportional nonlinear pharmacokinetics observed.

Quantification of oxaliplatin- and ioversol-related compounds in pharmaceutical formulations using novel HPLC-ICP-MS methods.

PURPOSE: Accurate quantifying of drug-related compounds in medicines is vital for safety. Commonly used structure-dependent methods rely on analytical standards. High-performance liquid chromatography coupled with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) offers a promising solution, being structure-independent and not requiring standards. In this study, we aim to develop HPLC-ICP-MS methods for the determination of related compounds in oxaliplatin and ioversol injections. RESULTS: The target analytes were eluted on an XSelect HSS T3 column (2.1 ×50 mm, 5 µm). Specifically, oxaliplatin injection was eluted isocracially for 3.5 min, and ioversol injection was eluted gradient with a total chromatographic run time of 12 min. The measurements to determine dihydroxy oxaliplatin-Pt(IV) and two related compounds of ioversol were performed by monitoring at m/z for 195Pt and 127I, respectively. The calibration curves were established over the range of 0.05-1 µM for Pt and 0.3-15 µM for I with the correlation coefficients greater than 0.999. The limits of quantification were 0.004 µM for dihydroxy oxaliplatin-Pt(IV), 0.022 µM for ioversol related compound A and 0.026 µM for ioversol related compound B. The accuracy (recovery between 93-105%) and precision (repeatability ≤ 6.1% RSD) were fit-for-purpose for dihydroxy oxaliplatin-Pt(IV), and the accuracy (recovery between 95-107%) and precision (repeatability ≤ 3.9% RSD) were also fit-for-purpose for both ioversol related compound A and ioversol related compound B. CONCLUSION: The quantitation accuracy of HPLC-ICP-MS closely matched that of the standard HPLC-UV approach. HPLC-ICP-MS can be used as a complementary analytical technique for quantitative determination of drug-related compounds.

Simulated drug disposition in critically ill patients to evaluate effective PK/PD targets for combating Pseudomonas aeruginosa resistance to meropenem.

Bacterial infections, including those caused by Pseudomonas aeruginosa, often lead to sepsis, necessitating effective antibiotic treatment like carbapenems. The key pharmacokinetic/pharmacodynamic (PK/PD) index correlated to carbapenem efficacy is the fraction time of unbound plasma concentration above the minimum inhibitory concentration (MIC) of the pathogen (%fT > MIC). While multiple targets exist, determining the most effective one for critically ill patients remains a matter of debate. This study evaluated meropenem's bactericidal potency and its ability to combat drug resistance in Pseudomonas aeruginosa under three representative PK/PD targets: 40% fT > MIC, 100% fT > MIC, and 100% fT > 4× MIC. The hollow fiber infection model (HFIM) was constructed, validated, and subsequently inoculated with a substantial Pseudomonas aeruginosa load (1 × 108 CFU/mL). Different meropenem regimens were administered to achieve the specified PK/PD targets. At specified intervals, samples were collected from the HFIM system and subjected to centrifugation. The resulting supernatant was utilized to determine drug concentrations, while the precipitates were used to track changes in both total and drug-resistant bacterial populations over time by the spread plate method. The HFIM accurately reproduced meropenem's pharmacokinetics in critically ill patients. All three PK/PD target groups exhibited a rapid bactericidal response within 6 h of the initial treatment. However, the 40% fT > MIC and 100% fT > MIC groups subsequently showed bacterial resurgence and resistance, whereas the 100% fT > 4× MIC group displayed sustained bactericidal activity with no evidence of drug resistance. The HFIM system revealed that maintaining 100% fT > 4× MIC offers a desirable microbiological response for critically ill patients, demonstrating strong bactericidal capacity and effective prevention of drug resistance.

Multistate modeling for survival analysis in critically ill patients treated with meropenem.

Appropriate antibiotic dosing to ensure early and sufficient target attainment is crucial for improving clinical outcome in critically ill patients. Parametric survival analysis is a preferred modeling method to quantify time-varying antibiotic exposure - response effects, whereas bias may be introduced in hazard functions and survival functions when competing events occur. This study investigated predictors of in-hospital mortality in critically ill patients treated with meropenem by pharmacometric multistate modeling. A multistate model comprising five states (ongoing meropenem treatment, other antibiotic treatment, antibiotic treatment termination, discharge, and death) was developed to capture the transitions in a cohort of 577 critically ill patients treated with meropenem. Various factors were investigated as potential predictors of the transitions, including patient demographics, creatinine clearance calculated by Cockcroft-Gault equation (CLCRCG ), time that unbound concentrations exceed the minimum inhibitory concentration (fT>MIC ), and microbiology-related measures. The probabilities to transit to other states from ongoing meropenem treatment increased over time. A 10 mL/min decrease in CLCRCG was found to elevate the hazard of transitioning from states of ongoing meropenem treatment and antibiotic treatment termination to the death state by 18%. The attainment of 100% fT>MIC significantly increased the transition rate from ongoing meropenem treatment to antibiotic treatment termination (by 9.7%), and was associated with improved survival outcome. The multistate model prospectively assessed predictors of death and can serve as a useful tool for survival analysis in different infection scenarios, particularly when competing risks are present.

Development and validation of a UPLC-PDA method for quantifying ceftazidime in dried blood spots.

Bacterial infection is a leading cause of neonatal death. Ceftazidime, commonly used for neonatal infections, is often used off-label. Blood sampling limits pharmacokinetic (PK) studies in neonatal patients. The dried blood spots (DBS) are a potential matrix for microsampling. Herein, we describe an ultra-performance liquid chromatography with a photodiode array (UPLC-PDA) to determine ceftazidime in DBS from neonatal patients in support of pharmacokinetic studies. The Capitainer® device-based DBS samples containing 10 µL blood were extracted in 70% methanol/water (v/v) with acetaminophen as the internal standard (IS). The extraction process was carried out at 20 °C using a block bath shaker at 1000 rpm for 30 min. The extracted ceftazidime was subsequently eluted through an Acquity UPLC HSS T3 column (2.1 × 50 mm, 1.8 µm). Elution was achieved using a water (containing 0.1% trifluoroacetic acid)/acetonitrile linear gradient at a flow rate of 0.5 mL/min, and the analytical time was 3.2 min. The PDA detection wavelength was set at 259 nm. The method underwent thorough validation following the recommendation of the European Bioanalysis Forum (EBF) and the bioanalytical guideline established by the European Medicines Agency (EMA). No interfering peaks were detected at the retention times of ceftazidime and IS. The ceftazidime exhibited a quantification range spanning from 0.5 to 200 µg/mL, and the assay demonstrated good accuracy (intra/inter-assay ranging from 90.1% to 104.8%) and precision (intra/inter-assay coefficient of variations ranging from 4.8% to 11.7%). The method's applicability was demonstrated by analyzing clinical DBS samples collected from neonatal patients.

A semimechanistic pharmacokinetic/pharmacodynamic model for alanine aminotransferase-based hepatotoxicity of methotrexate in paediatric patients with acute lymphoid leukaemia.

AIMS: Methotrexate (MTX) is recognized for its potential to induce hepatotoxicity, commonly manifested by elevated alanine aminotransferase (ALT) levels. However, the quantitative relationship between the pharmacokinetics (PK) of MTX and ALT-based hepatotoxicity remains unclear. This study aimed to develop a semimechanistic PK/pharmacodynamic (PD) model to characterize the MTX-induced hepatotoxicity based on ALT in paediatric patients with acute lymphoid leukaemia. METHODS: A retrospective study was conducted on paediatric patients who received high-dose (3-5 g/m2 ) MTX treatment. MTX concentrations were assessed at 24-h intervals until the concentration dropped below 0.1 µmol/L. ALT concentrations were measured both before and after MTX administration. A population PK model was initially developed, which was later connected to a semimechanistic hepatotoxicity model. RESULTS: The PK model was developed using 354 MTX concentrations obtained from 51 patients, while the PD model was constructed using 379 ALT concentrations collected from 48 patients. The optimal PK model for MTX consisted of a 2-compartment structure, where body surface area served as a covariate for clearance and central volume of distribution. An indirect response model coupled to a liver injury signal transduction model was developed to describe the dynamics of ALT after MTX administration. The drug effect was adequately described by a linear model, exhibiting considerable interoccasion variability for each treatment session. No significant covariates were identified to have an impact on the PD parameters. CONCLUSION: A semimechanistic model was developed to describe ALT-based hepatotoxicity of MTX, and it has the potential to serve as a valuable tool for characterizing drug-induced hepatotoxicity.

Linezolid dosing in critically ill patients undergoing various modalities of renal replacement therapy: a pooled population pharmacokinetic analysis.

The altered pharmacokinetics (PK) of linezolid are pronounced in critically ill patients undergoing different modalities of renal replacement therapy (RRT). This study aimed to provide a pooled population PK analysis of linezolid in patients undergoing RRT, and to evaluate the pharmacodynamic target attainment of linezolid standard dosing (600 mg q12h). In total, 414 pooled linezolid concentration observations from 69 patients undergoing intermittent haemodialysis (IHD), sustained low-efficiency dialysis (SLED) or continuous RRT were used to develop the population PK model. The probability of target attainment (PTA) for the efficacy markers of 85% T>minimum inhibitory concentration (MIC) and area under the concentration-time curve (AUC)/MIC >100 was evaluated, and the risk of toxicity was estimated based on Cmin ≥10 mg/L. Linezolid concentration data were described adequately by a two-compartment model. Renal function and body weight were identified as significant modifiers for endogenous clearance of linezolid. Simulations demonstrated that the PTA of 85% T>MIC and AUC/MIC>100 was unacceptably low (0-58.6%, MIC ≥1 mg/L) in RRT patients with preserved renal function, while desirable 85% T>MIC attainment (≥ 90%, MIC ≤2 mg/L) was achieved in anuric RRT patients. The predicted risk of toxicity was negligible (<1.0%) in patients with preserved renal function (regardless of RRT modality), while the probability of reaching Cmin ≥10 mg/L was high (17.9-20.9%) for the anuric patient population undergoing IHD or SLED. In conclusion, standard linezolid dosing is adequate for anuric RRT patients with MIC ≤2 mg/L.

Review on Wood Deformation and Cracking during Moisture Loss.

Wood, being a natural hygroscopic material, the interaction between wood and moisture plays a crucial role in wood processing and utilization. Moisture affects the physical and mechanical properties of wood, and is also one of the main external factors that cause wood deformation and cracking. Drying shrinkage is a common phenomenon during the processing and utilization of wood induced by moisture loss. Drying stress is the main cause of wood deformation and cracking. The shrinkage differential between tangential and radial direction and moisture content gradient of wood are two reasons induced the generation of drying stresses. In this review, the existing states of moisture in wood and the interaction between water molecules and wood components were systematically summarized. The current research progress and deficiencies in three aspects including the factors resulted in deformation and cracking in wood caused by moisture loss, the correlation between wood mechanical properties and moisture, as well as the development of deformation and cracking in wood under moisture loss were discussed. This review aims to facilitate further research on the deformation and cracking of wood under moisture loss by providing valuable insights and assistance, ultimately reducing the occurrence of wood deformation and cracking. And thus, it will enhance the overall utilization of wood resources, making wood better serve human life.

Development of polyanion-metal ion solution systems to overcome phospholipids-related matrix effects in LC-MS/MS-based bioanalysis.

Phospholipids-related matrix effects are a major source impacting the reproducibility of analyte quantification in LC-MS/MS-based bioanalysis. This study intended to evaluate different combinations of polyanion-metal ion based solution system for phospholipids removal and elimination of matrix effects in human plasma. Blank plasma samples or plasma samples spiked with model analytes were proceeded with different combinations of polyanions (dextran sulfate sodium (DSS) and alkalized colloidal silica (Ludox)) and metal ions (MnCl2, LaCl3, and ZrOCl2) followed with acetonitrile-based protein precipitation. The representative classes of phospholipids and model analytes (acid, neutral, and base) were detected using multiple reaction monitoring mode. The polyanion-metal ion systems were explored for providing balanced analyte recovery and phospholipids removal by optimizing reagent concentrations or adding formic acid and citric acid as the shielding modifiers. The optimized polyanion-metal ion systems were further evaluated for eliminating matrix effects of non-polar and polar compounds. Any combinations of polyanions (DSS and Ludox) and metal ions (LaCl3 and ZrOCl2) could completely remove phospholipids at best-case scenario, while the analyte recovery is low for compounds with special chelation groups. Addition of formic acid or citric acid can improve analyte recovery but significantly decrease the removal efficiency of phospholipids. Optimized ZrOCl2-Ludox/DSS systems provided efficient phospholipids removal (>85%) and adequate analyte recovery, and the systems also correctly eliminated ion suppression or enhancement of the non-polar and polar drugs. The developed ZrOCl2-Ludox/DSS systems are cost-effective and versatile for balanced phospholipids removal and analyte recovery and provide adequate elimination of matrix effects.

A Validated UHPLC-MS/MS Method to Quantify Eight Antibiotics in Quantitative Dried Blood Spots in Support of Pharmacokinetic Studies in Neonates.

OBJECTIVES: Conduction of pharmacokinetic (PK) study in pediatric patients is challenging due to blood sampling limits. The dried blood spots (DBS) method represents a potential matrix for microsampling in support of PK studies in children. Herein, we used the Capitainer® qDBS device to develop a DBS method that can collect an exact 10 µL volume of blood on a paper card. This DBS method was developed to simultaneously quantify the concentrations of eight antibiotics, including sulbactam, tazobactam, ampicillin, meropenem, cefotaxime, cefoperazone, piperacillin, and metronidazole using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). METHODS: The prepared DBS samples were extracted in methanol containing acetaminophen as the internal standard at 20 °C on a block bath shaker at 500 rpm for 30 min. The extracted antibiotics were eluted on an Acquity UPLC HSS T3 column (2.1 × 50 mm, 1.8 µm) using gradient elution with a total chromatographic run time of 6.5 min. The precursor and product ions of the analytes were detected by use of the multiple reaction monitoring (MRM) mode. RESULTS: No interfering peaks at the respective retention times of the analytes were observed in DBS samples. The lower limits of quantification (LLOQ) for the antibiotics were between 0.25 and 2.0 µg/mL, and satisfactory accuracies (intra/inter-assay bias -16.7 to +13.6%) and precisions (intra/inter-assay coefficient of variations 1.5-15.6%) were obtained for the analytes. As a proof of concept, the method was applied to DBS samples obtained from neonatal patients treated with ampicillin and piperacillin/sulbactam. CONCLUSIONS: The DBS method is simple and robust, and it can be used in children with limited blood sampling.

External Evaluation of Population Pharmacokinetic Models of Methotrexate for Model-Informed Precision Dosing in Pediatric Patients with Acute Lymphoid Leukemia.

BACKGROUND: Methotrexate (MTX) is a key immunosuppressant for children with acute lymphoid leukemia (ALL), and it has a narrow therapeutic window and relatively high pharmacokinetic variability. Several population pharmacokinetic (PopPK) models of MTX in ALL children have been reported, but the validity of these models for model-informed precision dosing in clinical practice is unclear. This study set out to evaluate the predictive performance of published pediatric PopPK models of MTX using an independent patient cohort. METHODS: A PubMed literature search was performed to identify suitable models for evaluation. Demographics and measurements of the validation dataset were retrospectively collected from the medical records of ALL children who had received intravenous MTX. Predictive performance for each model was assessed by visual comparison of predictions to observations, median and mean predicted error (PE), and relative root mean squared error (RMSE). RESULTS: Six models were identified for external evaluation, carried out on a dataset containing 354 concentrations from 51 pediatrics. Model performance varied considerably from one model to another. Different models had the median PE for population and individual predictions at -33.23% to 442.04% and -25.20% to 6.52%, mean PE for population and individual predictions at -25.51% to 780.87% and 1.33% to 64.44%, and RMSE for population and individual predictions at 62.88% to 1182.24% and 63.39% to 152.25%. All models showed relatively high RMSE. CONCLUSIONS: Some of the published models showed reasonably low levels of bias but had some problems with imprecision, and extensive evaluation is needed before model application in clinical practice.

Population pharmacokinetic/pharmacodynamic evaluations of amikacin dosing in critically ill patients undergoing continuous venovenous hemodiafiltration.

OBJECTIVES: The pharmacokinetics/pharmacodynamics (PK/PD) of amikacin in critically ill patients undergoing continuous venovenous hemodiafiltration (CVVHDF) are poorly described, and appropriate dosing is unclear in this patient population. This study aimed to develop a population PK model of amikacin and to provide systemic PK/PD evaluations for different dosing regimens in CVVHDF patients. METHODS: One hundred and sixty-one amikacin concentration observations from thirty-three CVVHDF patients were pooled to develop the population PK model. Monte Carlo simulations were performed to assess the PK/PD index-based efficacy (Cmax/minimal inhibitory concentration (MIC) > 8 and AUC/MIC > 58.3), nonrisk of drug resistance (T>MIC > 60%) and risk of toxicity (trough concentration > 5 mg/l) for different dosing regimens. KEY FINDINGS: A two-compartment model adequately described the concentration data of amikacin. A loading dose of at least 25 mg/kg amikacin is needed to reach the efficacy targets in CVVHDF patients for an MIC of 4 mg/l, and the studied doses could not provide adequate drug exposure and T>MIC > 60% for an MIC ≥ 8 mg/l. The risk of toxicity for amikacin was unacceptably high for the patient population with low clearance. CONCLUSIONS: Our study demonstrated that a loading dose of 25-30 mg/kg amikacin is needed to provide adequate PK/PD target attainment in CVVHDF patients for an MIC ≤ 4 mg/l.

Foetal and neonatal exposure prediction and dosing evaluation for ampicillin using a physiologically-based pharmacokinetic modelling approach.

AIMS: Ampicillin is frequently used in neonates for the treatment of sepsis and as an intrapartum prophylaxis option for Group B Streptococcus. Pharmacokinetic data to guide ampicillin dosing in neonates and during the intrapartum period are limited. The objective of this study was to build a physiologically-based pharmacokinetic (PBPK) model to characterize the disposition of ampicillin in neonates and foetuses and to inform corresponding optimal dosing regimens. METHODS: An adult ampicillin PBPK model was first developed using the Simcyp® simulator. The adult model was then scaled to neonates by accounting for maturational changes in physiological parameters and age-dependent drug disposition or extended to a pregnancy model for mothers and foetuses. Models were verified using collected mean or individual-level concentration data from the literature. RESULTS: The developed adult PBPK model included elimination via glomerular filtration, OAT3-mediated tubular secretion and biliary excretion as well as hepatic metabolism, and 89.8% of the observed mean concentrations in adults were within a 2-fold range of model mean predictions. Most of the observed individual-level observations in neonates (78.4%) and foetuses (about 65% in two studies) were within the 90% prediction intervals. The recommended 50 mg/kg every 8 h (q8h) ampicillin regimen achieved the 75% fraction time of total drug concentration above minimum inhibitory concentration (T > MIC) target for an MIC ≤8 mg/L in >90% virtual neonates, and 1 g ampicillin for pregnant women provided adequate foetal exposure (>0.25 mg/L) for 4 h prior to delivery. CONCLUSIONS: A PBPK model was developed to characterize ampicillin's disposition in neonates, pregnant women, and foetuses, and the model supported optimal dosing evaluation in these vulnerable populations.

Defining Exposure Predictors of Meropenem That Are Associated with Improved Survival for Severe Bacterial Infection: A Preclinical PK/PD Study in Sepsis Rat Model.

Background: The pharmacokinetic/pharmacodynamic (PK/PD) index of carbapenems that best correlates with in vivo antimicrobial activity is percent time of dosing interval in which free drug concentration remains above MIC (%fT > MIC), while the magnitudes of the PK/PD index of carbapenems remains undefined in critically ill sepsis patients. Methods: A sepsis rat model was first developed by comparing the survival outcomes after intraperitoneal injection of different inoculum size (1−10 × 107 CFU) of Pseudomonas aeruginosa ATCC9027 (MIC = 0.125 mg/L) in neutropenic rats. The PK characteristics of the model drug meropenem in the developed sepsis rat model was then evaluated, and PK modeling and simulation was applied to design meropenem dosing regimens attaining various PD targets (40%fT > MIC, 100%fT > MIC, and 100%fT > 4 × MIC). The microbiological response and survival outcomes for different meropenem treatment regimens were investigated in the rat sepsis model (n = 12 for each group). Results: The optimal inoculum for the rat sepsis model was 1 × 107 CFU of Pseudomonas aeruginosa ATCC9027. A one-compartment model with first-order absorption best described the PK of meropenem in sepsis rats. Pronounced survival prolongation and lower hazard risk were observed in the treatment groups of 50 or 75 mg/kg/q2.4h (100%fT > MIC) and 75 mg/kg/q2h (100%fT > 4 × MIC) compared to the 75 mg/kg/q6h (40%fT > MIC) group, while meropenem groups with PD targets of 100%fT > MIC and 100%fT > 4 × MIC showed comparable survival curves. Microbiological response for different PD targets is inconclusive due to irregular bacterial counts in blood samples. Conclusions: The PD target of 40%fT > MIC is suboptimal for sepsis rats, and the aggressive 100%fT > 4 × MIC target does not provide a survival benefit against the target of 100%fT > MIC.

Population Pharmacokinetic Meta-Analysis and Dosing Recommendation for Meropenem in Critically Ill Patients Receiving Continuous Renal Replacement Therapy.

The optimal dosing regimen for meropenem in critically ill patients undergoing continuous renal replacement therapy (CRRT) remains undefined due to small studied sample sizes and uninformative pharmacokinetic (PK)/pharmacodynamic (PD) analyses in reported studies. The present study aimed to perform a population PK/PD meta-analysis of meropenem using available literature data to suggest the optimal treatment regimen. A total of 501 meropenem concentration measurements from 78 adult CRRT patients pooled from nine published studies were used to develop the population PK model for meropenem. PK/PD target (40% and 100% of the time with the unbound drug plasma concentration above the MIC) marker-based efficacy and risk of toxicity (trough concentrations of >45 mg/L) for short-term (30 min), prolonged (3 h), and continuous (24 h) infusion dosing strategies for meropenem were investigated. The impact of CRRT dose and identified covariates on the PD probability of target attainment (PTA) and predicted toxicity was also examined. Meropenem concentration data were adequately described by a two-compartment model with linear elimination. Trauma was identified as a pronounced modifier for endogenous clearance of meropenem. Simulations demonstrated that adequate PK/PD targets and low risk of toxicity could be achieved in non-trauma CRRT patients receiving meropenem regimens of 1 g every 6 h infused over 30 min, 1 g every 8 h infused over 3 h, and 2 to 4 g every 24 h infused over 24 h. The impact of CRRT dose (25 to 50 mL/kg/h) on PTA was clinically irrelevant, and continuous infusion of 3 to 4 g every 24 h was suitable for trauma CRRT patients (MICs of ≤0.5 mg/L). A population PK model was developed for meropenem in CRRT patients, and different dosing regimens were proposed for non-trauma and trauma CRRT patients.

Structural Properties and Hydrolysability of Paulownia elongate: The Effects of Pretreatment Methods Based on Acetic Acid and Its Combination with Sodium Sulfite or Sodium Sulfite.

The effects of CH3COOH and Na2SO3 pretreatment on the structural properties and hydrolyzability of fast-growing Paulownia elongate were investigated. Acetic acid increased cellulose's crystallinity and hydrolyzability when combined with alkaline sodium sulfite and sodium hydroxide. The cellulose content increased by 21%, the lignin content decreased by 6%, and the product showed better enzymatic digestibility. With a cellulase dose of 30 FPU/g DM, after 72 h hydrolysis, the hydrolysis yields of glucose and xylose were 78% and 83%, respectively, which were 51% and 69% higher than those of untreated materials. When the enzyme dosage was 20 FPU/g DM, after 72 h hydrolysis, the hydrolysis yields of glucose and xylose were 74% and 79%, respectively. The high hydrolyzability, low enzyme loading, and high hydrolysis yield demonstrate the potential of the proposed system for producing platform sugars from fast-growing Paulownia elongate.