Strong electron-phonon coupling and multigap superconductivity in 2H/1T Janus MoSLi monolayer.

Two-dimensional (2D) Janus transition metal dichalcogenides MXY manifest novel physical properties owing to the breaking of out-of-plane mirror symmetry. Recently, the 2H phase of MoSH has been demonstrated to possess intrinsic superconductivity, whereas the 1T phase exhibits a charge density waves state. In this paper, we have systematically studied the stability and electron-phonon interaction characteristics of MoSLi. Our results have shown that both the 2H and 1T phases of MoSLi are stable, as indicated by the phonon spectrum and the ab initio molecular dynamics. However, the 1T phase exhibits an electron-phonon coupling constant that is twice as large as that of the 2H phase. In contrast to MoSH, the 1T phase of MoSLi exhibits intrinsic superconductivity. By employing the ab initio anisotropic Migdal-Eliashberg formalism, we have revealed the two-gap superconducting nature of 1T-MoSLi, with a transition temperature (Tc) of 14.8 K. The detailed analysis indicates that the superconductivity in 1T-MoSLi primarily originates from the interplay between the vibration of the phonon modes in the low-frequency region and the dz2 orbital. These findings provide a fresh perspective on superconductivity within Janus structures.

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation.

In this paper, the MnOx catalysts with excellent toluene oxidation performance were prepared by a simple precipitation method. The physicochemical properties of the prepared MnOx catalysts were investigated by XRD, BET, H2-TPR, O2-TPD and XPS. The obtained results revealed that the crystallinity of the prepared MnOx catalysts could be effectively regulated by changing the (NH4)2CO3/Mn(NO3)2 molar ratio, and thus affecting the oxygen vacancy concentration of the prepared MnOx catalysts. The prepared MnOx-4 catalyst with the (NH4)2CO3/Mn(NO3)2 molar ratio of 4.0 had the poor crystallinity and small grain size, which effectively promoted the oxygen defects in the MnOx catalyst to be formed. At the same time, the MnOx-4 catalyst had a large specific surface area, the highest low temperature reducibility and the largest number of oxygen vacancies and surface adsorbed oxygen species, which allowed more surface oxygen species to participate in the redox reaction, and promoted the toluene deep oxidation. Therefore, when the (NH4)2CO3/Mn(NO3)2 molar ratio was 4.0, the prepared MnOx-4 catalyst exhibited an excellent toluene catalytic oxidation performance and robust catalytic stability. What's more, the toluene oxidation conversion on the MnOx-4 catalyst reached 99% at 230°C, and the MnOx-4 catalyst showed excellent resistance to water vapour.

Trends and Patterns in Electronic Health Record Research (1991-2022): A Bibliometric Analysis of Australian Literature.

Electronic Heath Records (EHRs) play vital roles in facilitating streamlined service provision and governance across the Australian health system. Given the recent challenges due to the COVID-19 pandemic, an ageing population, health workforce silos, and growing inefficiencies in traditional systems, a detailed historical analysis of the use of EHR research in Australia is necessary. The aim of this study is to examine the trends and patterns in EHR research in Australia over the past three decades by employing bibliometric methods. A total of 951 articles published in 443 sources were included in the bibliometric analysis. The annual growth rate of EHR research in Australia was about 17.1%. Since 2022, the main trending topics in EHR research were COVID-19, opioid usage, and natural language processing. A thematic analysis indicated aged care, clinical decision support systems, cardiovascular disease, drug allergy, and adverse drug reaction as the "hot" themes in EHR research in Australia. This study reveals a significant uptrend in EHR research in Australia, highlighting the evolving intellectual and collaborative landscape of this interdisciplinary field. The data also provide guidance for policymakers and funding institutions in terms of the most significant contributions and key fields of research while also holding public interest.

Impact of unilateral mastectomy on body posture: A prospective longitudinal observational study.

Objective: Unilateral mastectomy is known to induce postural alterations, yet the temporal development pattern of these changes remains elusive. This study aimed to explore the impact of unilateral mastectomy on body posture. Methods: A prospective, longitudinal, observational study with a one-group repeated-measures design was conducted. Patients undergoing unilateral mastectomy were recruited from a university-affiliated hospital in Western China and monitored for 12 months post-surgery. A trained nurse assessed seven postural baseline parameters on the day of suture removal and at 3, 6, and 12 months after unilateral mastectomy. Two parameters were in the sagittal plane (forward head posture and trunk rotation angle), and five were in the coronal plane (neck tilt, shoulder asymmetry, scapular asymmetry, scapular asymmetry relative to the spine, and pelvic tilt). Results: The final analysis included 159 patients. Baseline prevalence of most postural abnormalities ranged from 50.94% to 59.75%, with mean deviations between 2.74 and 4.51 mm. At 12 months post-mastectomy, prevalence and mean deviations increased by more than 30% and 3.50 mm, respectively, compared to baseline. Postural abnormalities increased gradually in the first 3 months, notably between the 3rd and 6th months, and slowed between the 6th and 12th months. On the mastectomy side, coronal plane abnormalities significantly increased within 12 months: earlobe to acromion distance (Wald χ2 = 45.283, P < 0.001), depressed shoulder height (Wald χ2 = 42.253, P < 0.001), depressed scapula height (Wald χ2 = 31.587, P < 0.001), scapula to spine distance (Wald χ2 = 45.283, P < 0.001), and elevated pelvic height (Wald χ2 = 48.924, P < 0.001). Conclusions: Postural changes are common post-unilateral mastectomy, with prevalence and deviation increasing gradually, particularly between 3 and 6 months post-mastectomy. Early rehabilitation initiation is recommended to mitigate postural changes. Trial registration: ChiCTR2000040897.

Sustainable production of catechol derivatives from waste tung nutshell C/G-type lignin via heterogeneous Cu-NC catalytic oxidation.

The sustainable production of catechol derivatives is a challenging task. Catechyl (C) and guaiacyl (G) lignins coexisting in waste tung nutshells are promising feedstocks to form valuable catechol derivatives, but the depolymerization of C/G lignin typically involves a catalytic reductive process that cannot produce these oxidized aromatic chemicals. Herein, we demonstrated that the sustainable production of catechol derivative aldehydes and acids from C/G lignin could be achieved through a heterogeneous copper-catalyzed oxidative process. Under optimized conditions, the Cu-NC-800 catalyst affords a 43.5 mg g-1 yield (8.9 wt%, based on Klason lignin) of aromatic aldehydes (protocatechuic aldehyde, vanillin) and acids (protocatechuic acid, vanillic acid). XRD and XPS analyses showed that CuO and Cu2O may be the active species during the heterogeneous oxidation of the Cu-NC-800 catalyst. This study opens new opportunities for the sustainable production of catechol derivatives from C/G-type lignin.

Metabolomics combined with physiology and transcriptomics reveal key metabolic pathway responses in apple plants exposure to different selenium concentrations.

Selenium (Se) can be absorbed by plants, thereby affects plant physiological activity, interferes gene expression, alters metabolite content and influences plant growth. However, the molecular mechanism underlying the plant response to Se remains unclear. In this study, apple plants were exposed to Se at concentrations of 0, 3, 6, 9, 12, 24, and 48 µM. Low concentrations of Se promoted plant growth, while high Se concentrations (≥24 µM) reduced photosynthesis, disturbed carbon and nitrogen metabolism, damaged the antioxidant system, and ultimately inhibited plant growth. The transcriptome and metabolome revealed that Se mainly affected three pathways, namely the 'biosynthesis of amino acids', 'starch and sucrose metabolism', and 'phenylpropanoid biosynthesis' pathways. 9 µM Se improved the synthesis, catabolism and utilization of amino acids and sugars, ultimately promoted plant growth. However, 24 µM Se up-regulated the related genes expression of PK, GPT, P5CS, SUS, SPS and CYP98A, and accumulated a large number of osmoregulation substances, such as citric acid, L-proline, D-sucrose and chlorogenic acid in the roots, ultimately affected the balance between plant growth and defense. In conclusion, this study reveals new insights into the key metabolic pathway in apple plants responses to Se.

Global prevalence and risk factors of depression in patients with chronic obstructive pulmonary disease: A systematic review and meta-analysis from 2000 to 2022.

OBJECTIVE: This study aims to assess the global and regional prevalence and the potential risk factors for depression among COPD patients. METHODS: Web of Science, EMBASE, PubMed, and PsycINFO databases were searched for the literature related to the prevalence and risk factors of depression in COPD. Random-effect models were performed to pool the global prevalence. Sub-group analysis and meta-regression were conducted to investigate the potential heterogeneity. Meta-analysis was performed only on the risk factors that have been reported in a minimum of three studies. RESULTS: A total of 79 studies from 25 countries were included. The pooled global prevalence of variably defined depression among COPD patients was 34.5% (95% CI: 30.9-38.1). The odds of depression in COPD patients were 3.53 times higher than in non-COPD participants (95% CI: 2.35-5.29). Meta-regression results showed that region, income level, and research setting are the main sources of heterogeneity. Female sex (OR=1.92), living alone (OR=2.29), BODE index (OR=1.48), dyspnea (OR=3.02), impaired quality of life (OR=1.26), and GOLD stage III∼IV (OR=1.96) were found to be significant risk factors for depression in meta-analyses. CONCLUSIONS: More than one-third of COPD patients experience depression, with marked variations in prevalence across countries and regions. This study further highlights the need for the consolidation of mental health considerations into COPD treatments. High-quality, longitudinal studies and further research are needed to gain a better understanding of risk and protective factors.

Activated carbon with high mesopore ratio derived from waste Zanthoxylum bungeanum branches by KNO3-assisted H3PO4 staged activation for toluene adsorption.

Waste Zanthoxylum bungeanum branches were used to prepare activated carbon adsorbents with high mesopore ratio by H3PO4 staged activation method with adding KNO3 additive. The prepared activated carbon adsorbents were characterized by SEM, BET, FT-IR, and XRD. The adsorption properties of the prepared activated carbon adsorbents were evaluated by the toluene adsorption/desorption in air. The quasi-first-order, quasi-second-order, and Bangham models were used to fit the obtained toluene adsorption results. The oxidative etching of KNO3 additive improved the pore-forming ability of the H3PO4 activator to enhance the activation pore-forming effects of the selected biomass raw material. The secondary pore-forming effects of K atoms promoted the effective expansion of the pore diameter in the activated carbon preparation process to prepare activated carbon adsorbents with high mesopore proportion. The specific surface area and mesopore proportion of the activated carbon adsorbents prepared by adding KNO3 additive exceeded 1100 m2/g and 71.00%, respectively, and the toluene adsorption capacity exceeded 370.00 mg/g. The rich mesopore structures can effectively reduce the toluene mass transfer resistance, which can promote the corresponding activated carbon adsorbent to be regenerated by low-temperature (40 °C) thermal desorption. The toluene adsorption on the prepared activated carbon adsorbents includes surface adsorption and diffusion in pore structures, and the toluene adsorption mechanism is more consistent with the Bangham kinetic model.

[Clinical Study of Peripherally Inserted Central Catheter-Related Thrombosis and Its Influence on the Blood Flow Status of the Inserted Veins in Cancer Patients].

Objective: To investigate the clinical features of peripherally inserted central catheter (PICC)-related thrombosis (PICCRT) within 2 weeks after PICC placement in cancer patients and its dynamic influence on the blood flow status of veins inserted with catheter, and to provide support for implementing thrombosis prevention and control measures. Methods: Between May 2019 and July 2020, patients who had solid tumors and who had PICC were prospectively enrolled at West China Hospital, Sichuan University. Scheduled color Doppler imaging was performed to examine the status of PICCRT formation at 8 points of time, with the first one conducted one day before the insertion of PICC and the other 7 completed within 2 weeks after the insertion of PICC. Then, based on whether patients had PICCRT, the patients were divided into two groups, a non-PICCRT group and a PICCRT group. The PICCRT group was further divided into two subgroups, an asymptomatic PICCRT group and a symptomatic PICCRT group, according to whether the patients had thrombosis-related symptoms and signs. Comparisons were made to study the incidence of PICCRT and the vascular diameter and the blood flow velocity in the veins inserted with catheters at different points of time in the patients of different groups. Results: Among 173 cancer patients in the cohort, 126 (72.8%) developed PICCRT, all of which occurred within 1 week after PICC insertion. There were 95 cases of asymptomatic PICCRT and 31 cases of symptomatic PICCRT. Before and after PICC insertion, the vascular diameter of both the asymptomatic and symptomatic PICCRT groups was significantly smaller than that of the non-PICCRT group and the blood flow velocity was significantly slower than that of the non-PICCRT group, with the difference continuing to increase with the prolongation of catheter indwelling time. Conclusion: Inserting catheters in veins with bigger vascular diameter and faster blood flow velocity may help reduce the incidence of PICCRT. The first week post catheter insertion is the key intervention period for the prevention of PICCRT.

Effects of Additives on Electrochromic Properties of Nanocrystalline Tungsten Oxide Films Prepared by Complexation-Assisted Sol-Gel Method.

To improve the electrochromic (EC) properties of sol-gel-derived WO3 films, a series of organic small molecules, such as dopamine (DA), catechol, tyramine, phenol and 2-phenylethylamine, were added into peroxotungstic acid precursor sols as structure-directing additives, and five modified WO3 films were prepared by a simple and low-cost complexation-assisted sol-gel method. The effects of the above additives on the EC properties of the modified WO3 films have been studied in detail. Compared with the pure WO3 polycrystalline film, all the modified films combine the advantages of nanocrystalline and amorphous phases and show higher EC properties attributed to the unique nanocrystal-embedded amorphous structure. The results indicate that different additives with different numbers and types of functional groups (hydroxyl and amino groups) can change the microstructure, morphology, and thus electrochemical and EC properties of the films in various degrees. The additives, in order of their strong interactions with the sols, are DA, catechol, tyramine, phenol and 2-phenylethylamine, primarily depending on the number of hydroxyl groups. Of all the additives, DA with both catechol hydroxyl and amino groups shows the most positive effect; that is, the WO3 film modified with DA exhibits the best EC properties in terms of contrast, switching speed, stability, and coloration efficiency.

Acceptance and associated factors of HIV testing among college students in China: A systematic review and meta-analysis.

BACKGROUND: Although HIV testing is helpful for early detection and treatment of HIV, its utilization rate is low among college students in China. Understanding the acceptance and associated factors of HIV testing is the key to improve the detection rate. The purpose of the systematic review was to examine the acceptance and associated factors of HIV testing (including HIV self-testing and HIV counseling and testing services) among college students in China. METHODS: This systematic review was reported following PRISMA guidelines 2020. Electronic sources such as PubMed, Embase, Web of Science, CNKI, CBM, Wanfang Database and VIP Database were searched for relevant studies published before September 2022. The tool by Agency for Healthcare Research and Quality (AHRQ) was used to assess quality for cross-sectional studies. The random-effects and fixed-effect model were employed to estimate the pooled proportions and associated factor of HIV testing acceptance. The Cochrane's Q statistic and I2 test were used to examine heterogeneity. All the quantitative meta analyses were conducted using STATA version 12 software. RESULTS: A total of 21 eligible studies with 100, 821 participants were included in the systematic review. The pooled acceptance rate of HIV testing was 68% (95% CI = 60, 76), and varies between regions in China. Male, heterosexual and urban college students had higher HIV testing acceptance. Gender, medical specialty, sexual education, sexual behavior, HIV/AIDS knowledge, perception HIV risk, and previous HIV testing were the factors associated with HIV testing acceptance. CONCLUSION: The review revealed that most of the college students intend to accept HIV detection, and the proportion of acceptance influenced by different factors. Therefore, the government and universities should implement targeted measures, improve HIV testing services, and promote HIV testing behavior. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42022367976.

Toluene oxidation removal from air over CoxOy/AC catalyst.

The CoxOy/AC catalysts were prepared by wet impregnation method for toluene oxidation removal from air. The thermal stability of cobalt nitrate and Co oxide on the activated carbon (AC) support surface was analysed by thermal analysis. The physicochemical properties of the prepared catalysts were characterised by XRD, SEM, H2-TPR, and XPS. AC support with high specific surface area and developed pore structure can promote the dispersion of Co species on its surface to form highly dispersed Co oxide species. The participation of AC supports can promote the partial reduction of Co3O4 species to CoO species to coexist in the prepared CoxOy/AC catalyst. The Co2+/Co3+ ratio was significantly affected by the calcination temperature, and the appropriate Co2+/Co3+ ion pairs in the studied CoxOy/AC catalyst is helpful to the activity of O2 molecules to form reactive oxygen species. The oxygen species composition on the catalyst surface is obviously affected by the calcination temperature, which plays an important role in toluene oxidation reaction. The studied CoxOy/AC catalysts exhibited excellent toluene oxidation removal performances. The conversion of toluene exceeded 97% and 99% at 240°C and 250°C, respectively, and maintained good stability within 700 min. That is to say, the concentration of toluene in the air can be reduced from 10,000 ppm to less than 40 ppm by using the CoxOy/AC catalyst.

A recurrent inflammatory myofibroblastic tumor patient with two novel ALK fusions: a case report.

Background: Inflammatory myofibroblastic tumor (IMT) is a rare disease that mainly involves the lung and the abdomen. The gold standard of the IMT treatment is radical surgery, while chemotherapy and radiotherapy are represented usually for unresectable lesions. Anaplastic lymphoma kinase (ALK) rearrangements are present in approximately 50% of IMT patients, and several clinical trials of ALK tyrosine kinase inhibitors (TKIs) in the treatment of ALK-positive IMT patients are underway. Case Description: We reported a case of IMT in the right pelvic cavity. Initially, the patient underwent resection of multiple lesions. Unfortunately, the patient's tumor recurred half a year later, and enhanced computerized tomography (CT) of the whole abdomen revealed multiple low-density masses. Then the patient underwent resection of the recurrent tumors. Immunohistochemical staining exhibited the expression of ALK in the tumor cells, and next-generation sequencing (NGS) technology revealed two novel ALK fusions, ALK-ribosome binding protein 1 (RRBP1) and hydroxyacid oxidase 1 (HAO1)-ALK fusions. These fusions were able to be transcribed and captured by RNA level. And the two fusions have not been reported in the IMTs. Conclusions: This case expanded the range of ALK fusion types and provided a promising molecular-targeted treatment strategy. In addition, the two novel ALK fusions may be the recurrent oncogenic mechanism in clinically aggressive IMT.

Correction: Xie et al. Synergistic Effect of MoS2 and SiO2 Nanoparticles as Lubricant Additives for Magnesium Alloy-Steel Contacts. Nanomaterials 2017, 7, 154.

In the original publication [...].

LINC00665 interacts with BACH1 to activate Wnt1 and mediates the M2 polarization of tumor-associated macrophages in GC.

Gastric cancer (GC) remains one of the prevalent causes of cancer-related deaths globally. Long non-coding RNAs (lncRNAs) have been associated with different cancers. The polarization of macrophages towards the M2 (alternatively activated) phenotype promotes immunologic tolerance and can induce gastric tumorigenesis. Thus far, lncRNAs have been shown to modulate the differentiation of immune cells. Here, we investigated the biological effects of LINC00665 on the progression of GC and explored the mechanisms underlying its ability to mediate the polarization of macrophages towards the M2 phenotype. We report that the levels of LINC00665 were increased in GC tissues. Furthermore, this increase in LINC00665 expression could be associated with decreased overall survival (OS), progression-free survival (PFS), and post-progression survival (PPS). Using cell-based macrophage polarization models, we demonstrated that LINC00665 upregulation in GC cells facilitated the polarization of macrophages towards the M2 but not M1 (classically activated) phenotype. Furthermore, the loss of LINC00665 prevented the M2 polarization of macrophages. Mechanically, we identified that Wnt1 was the downstream target of LINC00665. Additionally, LINC00665 could directly interact with the transcription factor BTB domain and CNC homology 1 (BACH1). The interaction between LINC00665 and BACH1 resulted in the activation and binding of BACH1 to the Wnt1 promoters. Furthermore, BACH1 silencing could inhibit GC progression, which highlighted a crucial role for BACH1 in LINC00665-mediated Wnt1 activation. In addition, genetic Wnt1 overexpression effectively abolished the repression of Wnt signaling after BACH1 depletion and mediated GC development by supporting M2 macrophage polarization. In conclusion, we report that LINC00665 modulates M2 macrophage polarization and suggest that it may facilitate macrophage-dependent GC progression.

Hierarchical porous activated carbon from waste Zanthoxylum bungeanum branches by modified H3PO4 activation for toluene removal in air.

Activated carbon adsorbents were prepared by chemical activation with waste Zanthoxylum bungeanum branches as raw materials and H3PO4/H2SO4 as composite activator under different dosages of the auxiliary activator H2SO4. The prepared samples were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface area test, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The adsorption/desorption performances of low concentration toluene in the air were evaluated, and its reusability was evaluated by the adsorption/desorption cycle. Adsorption results were fitted using the quasi-first, quasi-second, and Bangham models. The adsorption properties of activated carbon adsorbent for toluene in the air show a "volcanic-type change trend" with the increase of H2SO4 dosage. The toluene adsorption properties of the prepared activated carbon adsorbents from high to low are as follows: BAC02 > BAC05 > BAC01 > BAC10 > BAC00. When the mass fraction of auxiliary activator H2SO4 was 2.0%, the adsorption amount of toluene on the prepared BAC02 activated carbon adsorbent increased by 51%, reaching 511 mg/g. After thermal desorption at 200℃, the adsorption performance of toluene was regenerated. The adsorption process of toluene conforms to the quasi-first-order model and Bangham model. The whole adsorption process can be divided into three stages: outer surface adsorption, intra-channel diffusion, and adsorption equilibrium. The addition amount of H2SO4 significantly affected the specific surface area, pore volume, and pore size distribution of the prepared activated carbon adsorbent.

Insight into the effects of oxygen vacancy on the toluene oxidation over α-MnO2 catalyst.

In order to clarify the role of oxygen vacancy (OV), five α-MnO2 catalysts with abundant OVs are fabricated via a novel and facile redox-precipitation approach and employed to the toluene oxidation in air. The concentration of OVs in α-MnO2 catalysts is regulated via the alkyl chain length of alcohols, and its correlation with catalytic performances is scientifically investigated based on various characterization technologies and density functional theory (DFT) calculation. The α-MnO2-C2 catalyst exhibits excellent catalytic activity (T90 = 217 °C), stability, and water resistance for toluene oxidation in air. The OVs can induce the new bandgap states (BGS), which upshift the antibonding orbitals relative to the Fermi level (Ef), eventually favoring the formation of adsorbed active oxygen species. Furthermore, the OVs cause an increase in the amount of Mn3+, resulting in the elongated Mn-O bonds due to the strong Jahn-Teller effect of Mn3+. Therefore, the synergistic effects of OVs benefit toluene oxidation through L-H and MvK mechanisms over the prepared α-MnO2-Cx catalysts. This work reveals the important role of OVs in the promotion of toluene catalytic oxidation activity and also may provide new insights for the design of high-performance VOCs oxidation elimination catalyst.

Remarkable response to anti-PD1 immunotherapy in refractory metastatic high-grade myxofibrosarcoma patient: A case report.

INTRODUCTION: Myxofibrosarcoma (MFS) is a locally aggressive tumor and has the potential to be fatal because of distant metastasis. Immunotherapy targeting either programmed cell death protein 1 (PD-1) or programmed death ligand 1 (PD-L1) has recently shown a curative effect on multiple cancers including melanoma, non-small cell lung cancer, and renal cell carcinoma. Although the immunotherapy has been applied in sarcoma, there is little information about the efficiency to treat metastatic MFS. PATIENT CONCERNS: A 42-year-old male presented to the clinic with a mass in the left thigh. Mass resection and ligament replacement surgery were performed. DIAGNOSES: The patient was diagnosed as high-grade MFS (federation nationale des centres de lutte contre le cancer, Grade 3) with pulmonary metastasis. INTERVENTIONS: In the past few years, he was treated with surgery, chemoradiotherapy, and Anlotinib (an angiogenesis inhibitor), but the metastatic lesion continued to progress. About 40% to 50% of tumor cells in his pulmonary tissues were showed positive PD-L1 expression and his tumor mutational burden was 215Muts. Thus, he received Camrelizumab (PD-1 inhibitor). OUTCOMES: Six months after the initiating immunotherapy of Camrelizumab, the size of pulmonary lesions showed marked shrinkage, indicating a partial response. After a follow-up of 18 months, the patient remained in good condition without progressive disease. CONCLUSION: This case described here demonstrated that immunotherapy of PD-1 inhibitor is a promising treatment option for refractory MFS with PD-L1 positive or tumor mutational burden -high, which could contribute to effective tumor response.

Effect of morphology and phase engineering of MoS2 on electrochemical properties of carbon nanotube/polyaniline@MoS2 composites.

This paper rationally designs the morphology and phase structure of carbon nanotube/polyaniline@MoS2 (CNT/PANI@MoS2) composites, with MoS2 conductive wrapping growing vertically on the outer layer of the composites via hydrothermal method. The crystalline nature and chemical properties are characterized by X-ray diffraction (XRD), Flourier transformation infrared spectroscopy (FT-IR), Raman spectroscopy (Raman), X-ray photoelectron spectroscopy (XPS). Morphology and microstructures are determined by Scanning electric microscopy (SEM), Transmission electron microscope (TEM) and Brunauer-Emmett-Teller (BET). The developed composites possess excellent electrochemical properties (the specific capacitance is substantially increased by ~119%, reaching 700.0 F g-1 after wrapping by MoS2) and good cycling stability (after over 5000 cycles retains 80.8% capacitance) in three-electrode systems, which indicating that the unique morphology of MoS2 shells endow the channels to composites for rapid charge transport and ionic diffusion. Furthermore, symmetric supercapacitors devices assembled with the CNT/PANI@MoS2 composites achieve specific capacitance of 459.7 F g-1 at 1 A g-1, capacitance retention is 97.4% after 10,000 cycles and reach superior energy density of 40.9 Wh kg-1 at the power density of 400 W kg-1. This strategy of three-dimensional wrapping method may open up a new potential to relieve the dilemma of degraded performance of supercapacitor, while improving the capacitance and stability for supercapacitors.