Surface-enhanced Raman scattering (SERS) from different azobenzene self-assembled monolayers and sandwiches.

Self-assembled monolayers (SAMs) of functionalized azobenzene thiols (RAzoCnSH, n=3-6 for R=H, abbreviated as AzoCnSH; and n=4 for R=CH(3)CONH, abbreviated as aaAzoC4SH) on different substrates RAzoCnSz.sbnd;z.sfnc;S (S represents substrates of vacuum-deposited gold (Au), silver foil (Ag), HNO(3) etched silver foil (EAg), and silver mirror (mAg)) have been studied by SERS in the near-infrared region. SERS of the SAMs on EAg and/or mAg exhibit SERS effects that vary with etching time and/or deposition time. The most appropriate time is 5 s for etching in 1:1 HNO(3) and 40 s for deposition in 0.1 M Ag(NH(3))(2)NO(3). Further, a layer of Ag mirror was conveniently deposited on the top of the SAMs on different substrates, yielding a more efficient SERS-active system possessing a "sandwiched" structure of mAgz.sfnc;RAzoCnS-z.sfnc;S. An appropriate surface roughness is required for the strongest SERS effect. Scanning electron microscopy (SEM) indicates that there exist a large number of projects around 100 nm on the surface showing the strongest SERS effect. When the surface roughness is decreased or increased, the SERS effect decreases sharply. The relationship between the SERS effect and the structural nature was investigated and showed that the enhancement factor decays exponentially with increasing in distances of the azobenzene group from the underlying substrate or the overlying silver mirror. This result reveals that the SERS effect may be the result of the electromagnetic coupling effect between two metal layers.

[Expression and characterization of Kringle 1-5 domains of human plasminogen].

The cDNA encoding Kringle 1-5 domains of human plasminogen (designated as K1-5), obtained from HepG2 by RT-PCR, was cloned into expression vector pHIL-S1. The recombinant plasmid pHIL-K1-5 was transformed into Pichia pastoris GS115 and the recombinant yeast was induced by methanol to express the recombinant protein. The expressed protein was purified by lysine affinity chromatography. The recombinant K1-5 inhibited the growth of bovine aortic endothelial cells (BAEC) stimulated by the basic fibroblast growth factor (bFGF), in a dosage-dependent manner, with a half maximal concentration of 14 mg/L. And rhK1-5 inhibited 47% of the BAEC migration stimulated by bFGF at the concentration of 50 mg/L. rhK1-5 also affected the cell cycle of BAEC and caused G(0)-G(1) arrest at the concentration of 14 mg/L.

An antitumor agent of beta-cyclodextrin-modified titanocene complex: synthesis and characterization.

The complex of a derivative of beta-cyclodextrin, that is mono[6-deoxy-6-(2-butenedinitrile-2,3-dimercapto sodium salt)]-beta-cyclodextrin (6-mnt-beta-CD), with titanocene (titanocene di[mono[6-deoxy-6-(2-butenedinitrile-2,3-dimercapto)]-beta-cyclodextrin], Cp2Ti[6-mnt-beta-CD]2) has been synthesized and characterized by IR spectroscopy, UV spectroscopy, elemental analysis, thermogravimetry, 1H- and 13C-NMR spectroscopy. The stoichiometry of the target molecule was determined by 1H-NMR spectroscopy and elemental analysis.

[Expression and characterization of Kringle 1-4.5 domains of human plasminogen].

The cDNA encoding Kringle 1-4 and part of Kringle 5 domains of human plasminogen (K1-4.5), obtained from HepG2 by RT-PCR, was cloned into expression vector pHIL-S1. The recombinant plasmid pHIL-K1-4.5 was transformed into Pichi pastoris GS115 and the recombinant yeast was induced to express the recombinant proteins by methanol. The expressed proteins were purified by lysine affinity chromatography to a purity of 95%. The recombinant K1-4.5 inhibited the growth of bovine capillary endothelial cells (BAEC) stimulated by the basic fibroblast growth factor (bFGF), in a dosage-dependent manner with a half maximal concentration of 2 mg/L. rhK1-4.5 also inhibited 40% of the BAEC migration stimulated by bFGF in the concentration of 1 mg/L.

[Feeding of mixed-carbon-resource during the expression phase in cultivation of recombinant Pichia pastoris expressing angiostatin].

A recombinant strain of Pichia pastoris with a phenotype of Muts was used to produce angiostatin in a 5-L fermentor. The methanol utilization ability of the present strain was weak, which resulted in extremely low growth rate and angiostatin productivity during the expression phase with methanol as the sole carbon source. To enhance the cell density and angiostatin expression level, mixed-carbon-source of glycerol-methanol was used in the expression phase. The methanol concentration was well controlled at 5 g/L by a methanol sensor and control system, and glycerol was continuously fed into the fermentor to achieve a higher cell density. 120 g/L of cells and 39 mg/L of angiostatin were reached at the end of fermentation which lasted 110 h. The mean specific cell growth rate in the expression phase was 0.01 h(-1), and the mean specific angiostatin productivity was 0.006 mg/(g x h). According to the data obtained in several runs of fermentation in which glycerol was fed at different rates, a higher mean specific angiostatin productivity was reached at the mean specific cell growth rate of 0.012 h(-1). To avoid the repression of angiostatin expression caused by residual glycerol and ethanol accumulation due to overfeeding of glycerol, glycerol addition was controlled to produce continuous oscillations in dissolved oxygen, because the change of dissolved oxygen concentration could deliver the information of available carbon source in the fermentation broth. Controlled glycerol feeding also avoided the problem of oxygen limitation brought by high cell density, and thus decreased the cooling requirement of the fermentor. Cell density reached 150 g/L at the end of fermentation, and angiostatin level reached 108 mg/L after an expression period of 96 h when the mean specific growth rate was maintained at 0.012 h(-1) by using the glycerol feeding strategy to result in the oscillations in dissolved oxygen. The mean specific angiostatin productivity was improved to 0.02 mg/(g x h). The apparent cell yield on glycerol and methanol were respectively 0.69 g/g and 0.93 g/g, higher than those in the fermentation without using the feeding strategy with dissolved oxygen as the indicator of metabolism.

Self-assembly of L-cysteine-copper(II)/copper(I) multilayer thin films on gold.

Self-assembled multilayer thin films have been prepared on Au substrate by alternate surface derivatization with L-cysteine hydrochloride and cupric perchlorate. The layer-by-layer structure at each step of multilayer formation was investigated by X-ray photoelectron spectroscopy. The measurements indicate that there are two structure modes in the multilayers. One is that Cu(2+) sandwiches between two amino acid groups. The other one is that Cu(+) is bonded through disulfide and thiolate. This process is also confirmed by cyclic voltammetry of Cu ion at different self-assembled multilayers. Steps further on will lead to repeated multilayer films.