Nuclear receptor subfamily 4 group A member 1 promotes myocardial ischemia/reperfusion injury through inducing mitochondrial fission factor-mediated mitochondrial fragmentation and inhibiting FUN14 domain containing 1-depedent mitophagy.

This study investigated the mechanism by which NR4A1 regulates mitochondrial fission factor (Mff)-related mitochondrial fission and FUN14 domain 1 (FUNDC1)-mediated mitophagy following cardiac ischemia-reperfusion injury(I/R). Our findings showed that the damage regulation was positively correlated with the pathological fission and pan-apoptosis of myocardial cell mitochondria. Compared with wild-type mice (WT), NR4A1-knockout mice exhibited resistance to myocardial ischemia-reperfusion injury and mitochondrial pathological fission, characterized by mitophagy activation. Results showed that ischemia-reperfusion injury increased NR4A1 expression level, activating mitochondrial fission mediated by Mff and restoring the mitophagy phenotype mediated by FUNDC1. The inactivation of FUNDC1 phosphorylation could not mediate the normalization of mitophagy in a timely manner, leading to an excessive stress response of unfolded mitochondrial proteins and an imbalance in mitochondrial homeostasis. This process disrupted the normalization of the mitochondrial quality control network, leading to accumulation of damaged mitochondria and the activation of pan-apoptotic programs. Our data indicate that NR4A1 is a novel and critical target in myocardial I/R injury that exertsand negative regulatory effects by activating Mff-mediated mito-fission and inhibiting FUNDC1-mediated mitophagy. Targeting the crosstalk balance between NR4A1-Mff-FUNDC1 is a potential approach for treating I/R.

Prenatal chromosomal microarray analysis in a large Chinese cohort of fetuses with congenital heart defects: a single center study.

BACKGROUND AND OBJECTIVES: Congenital heart defect (CHD) is one of the most common birth defects. The aim of this cohort study was to evaluate the prevalence of chromosomal abnormalities and the clinical utility of chromosomal microarray analysis (CMA) in fetuses with different types of CHD, aiming to assist genetic counseling and clinical decision-making. METHODS: In this study, 642 fetuses with CHD were enrolled from a single center over a six-year period (2017-2022). Both conventional karyotyping and CMA were performed simultaneously on these fetuses. RESULTS: The diagnostic yield of CMA in fetuses with CHD in our study was 15.3% (98/642). Our findings revealed a significant increase in the diagnostic yield of CMA compared to karyotyping in fetuses with CHD. Among CHD subgroups, the diagnostic yields were high in complex CHD (34.9%), conotruncal defects (28.6%), right ventricular outflow tract obstructive defects (RVOTO) (25.9%), atrioventricular septal defects (AVSD) (25.0%) and left ventricular outflow tract obstructive defects (LVOTO) (24.1%), while those in other CHD (10.6%) and septal defects (10.9%) were relatively low. The overall detection rate of clinically significant chromosomal abnormalities was significantly higher in the non-isolated CHD group compared to the isolated CHD group (33.1% vs. 9.9%, P < 0.0001). Interestingly, numerical chromosomal abnormalities were more likely to occur in the non-isolated CHD group than in the isolated CHD group (20.3% vs. 2.0%, P < 0.0001). The rate of termination of pregnancy (TOP)/Still birth in the non-isolated CHD group was significantly higher than that in the isolated CHD group (40.5% vs. 20.6%, P < 0.0001). Compared to the isolated CHD group, the detection rate of clinically significant chromosomal abnormalities was significantly higher in the group of CHD with soft markers (35.6% vs. 9.9%, P < 0.0001) and in the group of CHD with additional structural anomalies (36.1% vs. 9.9%, P < 0.0001). CONCLUSIONS: CMA is a reliable and high-resolution technique that should be recommended as the front-line test for prenatal diagnosis of fetuses with CHD. The prevalence of chromosomal abnormalities varies greatly among different subgroups of CHD, and special attention should be given to prenatal non-isolated cases of CHD, especially those accompanied by additional structural anomalies or soft markers.

Primary cardiac synovial sarcoma originating from the atrial septum and associated pulmonary infarction: a case report.

BACKGROUND: Primary cardiac synovial sarcoma is a rare condition with limited treatment options for advanced stages. Surgery and chemotherapy are currently the mainstay treatments; however, survival rates remain low. CASE PRESENTATION: A 64-year-old woman presenting with symptoms of chest tightness and shortness of breath was found to have an obstructive right atrial mass, along with pulmonary infarction and metastasis. She was ultimately diagnosed with advanced primary cardiac synovial sarcoma. Following surgery, the patient's symptoms improved, and she underwent chemotherapy and anti-angiogenic therapy, but unfortunately, her survival time was only 8 months. CONCLUSION:  This case report aims to enhance clinicians' understanding of the diagnosis and treatment of primary cardiac synovial sarcoma. Enhancing both survival outcomes and quality of life in individuals with primary cardiac synovial sarcoma continues to present a significant challenge.

Experimental evidence on the feasibility of employing a replica symmetry breaking classification random laser.

Replica symmetry breaking (RSB) has been introduced in a random laser to investigate the interactions between disorder and fluctuations. In this work, the dynamic difference between four non-energy transfer and Förster resonance energy transfer (FRET)-assisted random laser systems is investigated based on RSB. It is found that FRET is one of the key factors influencing RSB, and it is demonstrated that RSB in a random laser is not robust. This dynamic difference can be attributed to the different disorders induced by the gain mechanism in different random laser systems. This provides experimental evidence and theoretical support for the classification feasibility of RL with different emission mechanisms employing RSB.

Single-cell transcriptome analysis deciphers the CD74-mediated immune evasion and tumour growth in lung squamous cell carcinoma with chronic obstructive pulmonary disease.

BACKGROUND: Chronic obstructive pulmonary disease (COPD) contributes to the incidence and prognosis of lung cancer. The presence of COPD significantly increases the risk of lung squamous cell carcinoma (LSCC). COPD may promote an immunosuppressive microenvironment in LSCC by regulating the expression of immune-inhibitory factors in T cells, although the mechanisms remain unclear. In this study, we aimed to decipher the tumour microenvironment signature for LSCC with COPD at a single-cell level. METHODS: We performed single-cell RNA sequencing on tumour tissues from LSCC with or without COPD, then investigated the features of the immune and tumour cells. We employed multiple techniques, including multispectral imaging, flow cytometry, tissue microarray analysis, survival analysis, co-culture systems and in vitro and in vivo treatment experiments, to validate the findings obtained from single-cell analyses. RESULTS: LSCC with COPD showed increased proportions of tumour-associated macrophages (TAMs) and higher levels of CD8+ T cell exhaustion molecules, which contributed to an immunosuppressive microenvironment. Further analysis revealed a critical cluster of CD74+ tumour cells that expressed both epithelial and immune cell signatures, exhibited a stronger capacity for tumorigenesis and predicted worse overall survival. Notably, migration inhibitory factor (MIF) secreted by TAMs from LSCC with COPD may promote the activation of CD74. MIF-CD74 may interact with CD8+ T cells and impair their anti-tumour activity by regulating the PI3K-STAT3-programmed cell death-1 ligand 1 signalling pathway, facilitating tumour proliferation and immune evasion. CONCLUSIONS: Our comprehensive picture of the tumour ecosystem in LSCC with COPD provides deeper insights into relevant immune evasion mechanisms and potential targets for immunotherapy. HIGHLIGHT: Our results demonstrated higher proportions of tumour-associated macrophages (TAMs) and higher levels of exhaustion molecules in CD8+ T cells in the microenvironment of LSCC with COPD. CD74+tumour cells were associated with poor disease prognosis. Migration inhibitory factor (MIF)-CD74 may interact with CD8+ T cells and impair their anti-tumour activity by regulating the PI3K-STAT3-PD-L1 signalling pathway, facilitating immune evasion.

Mendelian randomization demonstrates a causal link between peripheral circulating acylcarnitines and intracranial aneurysms.

Intracranial aneurysm (IA) is the most prevalent type of cerebral vascular disease causing life-threatening subarachnoid hemorrhages (SAH). A long-term vascular structure remodeling is considered as the main pathophysiological feature of IAs. However, the causal factors triggering the pathophysiological process are not clear. Recently, the abnormalities of peripheral circulating proteins and metabolites have been found in IAs patients and associated with the ruptures. We comprehensively investigated the potential causal relationship between blood metabolites and proteins and IAs using the mendelian randomization (MR) analysis. We applied two-sample MR to explore the potential causal association between peripheral circulating metabolites (191 blood metabolites) and proteins (1398 proteins) and IAs using data from the FinnGen study and the GWAS datasets published by Bakker et al. We identified palmitoylcarnitine, stearoylcarnitine and 2-tetradecenoylcarnitine as causal contributors of IAs and ruptures. Further two-step mediation MR analysis suggested that hypertension as one of the contributors of IAs and ruptures mediated the causal relationship between palmitoylcarnitine, stearoylcarnitine and 2-tetradecenoylcarnitine and IAs. Together, our study demonstrates that blood metabolic palmitoylcarnitine, stearoylcarnitine and 2-tetradecenoylcarnitine are causally linked to the formation and rupture of IAs. Hypertension partially mediates the causal effects.

Rationally Designed S-Scheme CeO2/g-C3N4 Heterojunction for Promoting Visible Light Driven CO2 Photoreduction into Syngas.

Exploring low-cost visible light photocatalysts for CO2 reduction to produce proportionally adjustable syngas is of great significance for meeting the needs of green chemical industry. A S-Scheme CeO2/g-C3N4 (CeO2/CN) heterojunction was constructed by using a simple two-step calcination method. During the photocatalytic CO2 reduction process, the CeO2/CN heterojunction can present a superior photocatalytic performance, and the obtained CO/H2 ratios in syngas can be regulated from 1 : 0.16 to 1 : 3.02. In addition, the CO and H2 production rate of the optimal CeO2/CN composite can reach 1169.56 and 429.12 µmol g-1 h-1, respectively. This superior photocatalytic performance is attributed to the unique S-Scheme photogenerated charge transfer mechanism between CeO2 and CN, which facilitates rapid charge separation and migration, while retaining the excellent redox capacity of both semiconductors. Particularly, the variable valence Ce3+/Ce4+ can act as electron mediator between CeO2 and CN, which can promote electron transfer and improve the catalytic performance. This work is expected to provide a new useful reference for the rational construction of high efficiency S-Scheme heterojunction photocatalyst, and improve the efficiency of photocatalytic reduction of CO2, promoting the photocatalytic reduction of CO2 into useful fuels.

Temperature-compensated high strain measurement based on a Fabry-Perot interferometer with the virtual-assisted Vernier effect.

A highly sensitive optical fiber Fabry-Perot interferometer (FPI) for strain measurement with temperature compensation is proposed. Instead of using another actual reference interferometer, a virtual FPI is constructed to superpose with the sensing FPI to form the Vernier effect. The fundamental and the first-order harmonic Vernier effect are generated to increase the sensitivity by adjusting the parameter of the virtual FPI. In order to separate the strain from the environment temperature, an FBG is cascaded to distinguish the applied temperature. Experimental results demonstrate that, with the help of the fundamental Vernier effect, the sensitivity and temperature of the FPI increases from 1.05 pm/°C to 10.63 pm/°C in the temperature range of 40-120°C, and the sensitivity of strain increases from 2.635 pm/µÎµ to 33.11 pm/µÎµ in the strain range of 0-400 µÎµ. In order to access the tracking points more easily and further enhance the sensitivities, the first-order harmonic Vernier effect is generated by modifying the virtual FPI. Results show that the temperature and strain sensitivities are 21.25 pm/°C and 62.25 pm/µÎµ, respectively. In addition, with the help of the FBG, the strain can be separated from the temperature by solving the cross-sensitivity matrix.

Observation of the photonic Hall effect and photonic magnetoresistance in random lasers.

Modulation of scattering in random lasers (RLs) by magnetic fields has attracted much attention due to its rich physical insights. We fabricate magnetic gain polymer optical fiber to generate RLs. From macroscopic experimental phenomena, with the increase of the magnetic field strength, the magnetic transverse photocurrent exists in disordered multiple scattering of RLs and the emission intensity of RLs decreases, which is the experimental observation of photonic Hall effect (PHE) and photonic magnetoresistance (PMR) in RLs. At the microscopic level, based on the field dependence theory of magnetic disorder in scattered nanoparticles and the replica symmetry breaking theory, the magnetic-induced transverse diffusion of photons reduces the scattering disorder, and then decreases the intensity fluctuation disorder of RLs. Our work establishes a connection between the above two effects and RLs, visualizes the influence of magnetic field on RL scattering at the microscopic level, which is crucial for the design of RLs.

Study on efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic membrane bioreactors.

In recent years, ceramic membranes have been increasingly used in membrane bioreactors (MBRs). However, membrane fouling was still the core issue restricting the large-scale engineering application of ceramic MBRs. As a novel and alternative technology, ultrasonic could be used to control membrane fouling. This research focused on the efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic MBRs. The results showed that ultrasonic reduced the sludge concentration in MBR, and the average particle size of sludge was always in a high range. The sludge activity of the system was stable at 6-9 (mg O2·(g MLSS·h)-1), indicating that ultrasonic did not destroy the activity of microorganisms in the system. The extracellular polymer substance (EPS) of the ultrasonic group was slightly higher than that of the control group, while the soluble microbial product (SMP) content was relatively stable. The ceramic membrane of the ultrasonic group has a partial retention effect on the organic components. The application of ultrasonic slowed down the decrease of the hydrophilicity of the ceramic membrane. The main pollutants on the membrane surface exist in the form of aromatic and heteroaromatic rings, alkynes, and so forth. Ultrasonic removes the amide substances from the membrane surface. Membrane fouling resistance is mainly due to membrane pore blockage, accounting for 75.53%. PRACTITIONER POINTS: Enrich the research on the mechanism of ultrasonic technology in membrane fouling control. The MBR can still operate normally with ultrasonic applied. The time for the ceramic membrane to reach the fouling end point is 2.4 times that without ultrasonic. The main cause of membrane fouling was pore blocking, accounting for 75.53%.

[Comparative study of external fixator combined with Kirschner wire fixation and Kirschner wires fixation in treatment of cubitus varus deformity in children].

Objective: To analyze the effectiveness comparison of external fixator combined with Kirschner wire fixation and Kirschner wire fixation in the treatment of cubitus varus deformity in children. Methods: A retrospective case-control study was conducted to collect 36 children of postoperative supracondylar humerus fracture complicating cubitus varus deformity between January 2018 and July 2022. Among them, 17 cases were treated with distal humeral wedge osteotomy external fixation combined with Kirschner wire fixation (observation group), and 19 cases were treated with distal humeral wedge osteotomy and Kirschner wire fixation (control group). The baseline data including age, gender, deformity side, time from fracture to operation, carrying angle of the healthy side and preoperative carrying angle of the affected side, elbow flexion and extension range of motion, and lateral condylar prominence index (LCPI) showed no significant difference between the two groups ( P>0.05). The operation time, hospitalization cost, healing time of osteotomy, postoperative complications, and the carrying angle, LCPI, and elbow flexion and extention range of motion were recorded and compared between the two groups. The elbow function was assessed by Oppenheim score at 3 months after operation and at last follow-up. Results: The children in both groups were followed up 13-48 months, with an average of 26.7 months. There was 1 case of needle tract infection in the observation group and 2 cases in the control group, and no nerve injury occurred, the difference in the incidence of complication (5.88% vs 10.53%) between the two groups was not significant ( χ 2=0.502, P=0.593). There was no significant difference in the operation time and fracture healing time between the two groups ( P>0.05); the hospitalization cost of the observation group was significantly higher than that of the control group ( P<0.05). The Oppenheim score of the observation group was significantly better than that of the control group at 3 months after operation ( P<0.05), but there was no significant difference in the Oppenheim score between the two groups at last follow-up ( P>0.05). At last follow-up, the carrying angle of affected side significantly improved in both groups when compared with preoperative ones ( P<0.05); the differences of the pre- and post-operative carrying angle of affected side and elbow flexion and extension range of motion showed no significant differences between the two groups ( P>0.05), but the difference in pre- and post-operative LCPI of the observation group was significantly better than that of the control group ( P<0.05). Conclusion: External fixator combined with Kirschner wire fixation and Kirschner wire fixation both can achieve satisfactory correction of cubitus varus deformity in children, and the former can achieve better short-term functional recovery of elbow joint and reduce the incidence of humeral lateral condyle protrusion.

Improving on mapping long-term surface water with a novel framework based on the Landsat imagery series.

Surface water plays a crucial role in the ecological environment and societal development. Remote sensing detection serves as a significant approach to understand the temporal and spatial change in surface water series (SWS) and to directly construct long-term SWS. Limited by various factors such as cloud, cloud shadow, and problematic satellite sensor monitoring, the existent surface water mapping datasets might be short and incomplete due to losing raw information on certain dates. Improved algorithms are desired to increase the completeness and quality of SWS datasets. The present study proposes an automated framework to detect SWS, based on the Google Earth Engine and Landsat satellite imagery. This framework incorporates implementing a raw image filtering algorithm to increase available images, thereby expanding the completeness. It improves OTSU thresholding by replacing anomaly thresholds with the median value, thus enhancing the accuracy of SWS datasets. Gaps caused by Landsat7 ETM + SLC-off are respired with the random forest algorithm and morphological operations. The results show that this novel framework effectively expands the long-term series of SWS for three surface water bodies with distinct geomorphological patterns. The evaluation of confusion matrices suggests the good performance of extracting surface water, with the overall accuracy ranging from 0.96 to 0.97, and user's accuracy between 0.96 and 0.98, producer's accuracy ranging from 0.83 to 0.89, and Matthews correlation coefficient ranging from 0.87 to 0.9 for several spectral water indices (NDWI, MNDWI, ANNDWI, and AWEI). Compared with the Global Reservoirs Surface Area Dynamics (GRSAD) dataset, our constructed datasets promote greater completeness of SWS datasets by 27.01%-91.89% for the selected water bodies. The proposed framework for detecting SWS shows good potential in enlarging and completing long-term global-scale SWS datasets, capable of supporting assessments of surface-water-related environmental management and disaster prevention.

Assessment of sediment transport in Luxiapuqu watershed using RUSLE-TLSD and InSAR techniques: Yarlung Tsangpo River, China.

The Yarlung Tsangpo River Basin is characterized by its intricate topography and a significant presence of erosive materials. These often coincide with heavy localized precipitation, resulting in pronounced hydraulic erosion and geological hazards in mountainous regions. To tackle this challenge, we integrated the RUSLE-TLSD (Revised Universal Soil Loss Equation-Transportation-limited sediment delivery) model with InSAR (Interferometric Synthetic Aperture Radar) data, aiming to explore the sediment transport process and pinpoint hazard-prone sites within mountainous small watershed. The RUSLE-TLSD model aids in evaluating multi-year sediment transport dynamics in mountainous zones. And, the InSAR data precisely delineates changes in sediment scouring and siltation at sites vulnerable to hazards. Our research estimates that the potential average soil erosion within the watershed stands at 52.33 t/(hm2 a), with a net soil erosion of 0.69 t/(hm2 a), the sediment transport pathways manifest within the watershed's gullies and channels. Around 4.32% of the watershed area undergoes sedimentation, predominantly at the base of slopes and within channels. Notably, areas (d) and (e) emerge as the most susceptible to disasters within the watershed. Further analysis of the InSAR data highlighted four regions in the typical area (e) from 2017 that are either sedimentation- or erosion-prone, referred to as "hotspots." Among them, R1 exhibits a strong interplay between water and sediment, rendering it highly sensitive to environmental factors. In contrast, R4, characterized by a sharp bend in siltation, remains relatively impervious to external elements. The NDVI (normalized difference vegetation index) stands out as the pivotal determinant influencing sediment transport within the watershed, exerting a pronounced impact on the outlet section, especially in spring. By employing this approach, we gained a deeper understanding of sediment transport mechanisms and potential hazards in small watershed in uninformative mountainous areas. This study furnishes a robust scientific framework beneficial for erosion mitigation and disaster surveillance in mountainous watersheds.

AnCMBR-AFB-integrated process for the treatment of high nitrogen and phosphorus wastewater.

Improving the nitrogen and phosphorus removal rates and efficiently controlling membrane fouling are the keys to fully exploiting the applicability of anaerobic membrane bioreactor (AnMBR) process in high-concentration wastewater treatment. To that purpose, an integrated reactor composed of an anaerobic ceramic membrane bioreactor and N anaerobic fluidized bed (AnCMBR-AFB) was built and pollutant removal efficiency, nitrogen and phosphorus recovery characteristics, and membrane pollution features of this integrated reactor were investigated. The results revealed that the integrated reactor had good pollutant removal efficiency, with turbidity, chromaticity, and UV254 average values of the effluent being 0.470 NTU, 0.011 A, and 0.057 cm-1, respectively, and the average CODCr removal rate was 80%. The nitrogen and phosphorus recoveries were significantly higher than the nitrogen and phosphorus removal rates of conventional AnMBR at 23.20 ± 1.17% and 43.34 ± 1.54%, respectively. Microscopic analysis revealed the formation of magnesium ammonium phosphate (MAP) crystals on the carrier's surface, and friction between the carrier and the membrane surface could delay membrane fouling while allowing the contaminated membrane surface to retain significant roughness. Membrane fouling was mostly brought on by amides and saturated hydrocarbons, and inorganic metal ions also played a role to some extent.

A Small Highly Sensitive Glucose Sensor Based on a Glucose Oxidase-Modified U-Shaped Microfiber.

Diabetes patients need to monitor blood glucose all year round. In this article, a novel scheme is proposed for blood glucose detection. The proposed sensor is based on a U-shaped microfiber prepared using hydrogen-oxygen flame-heating technology, and then 3-aminopropyltriethoxysilane (APTES) and glucose oxidase (GOD) are successively coated on the surface of the U-shaped microfiber via a coating technique. The glucose reacts with the GOD of the sensor surface to produce gluconic acid, which changes the effective refractive index and then shifts the interference wavelength. The structure and morphology of the sensor were characterized via scanning electron microscope (SEM) and confocal laser microscopy (CLM). The experimental results show that the sensitivity of the sensor is as high as 5.73 nm/(mg/mL). Compared with the glucose sensor composed of the same material, the sensitivity of the sensor increased by 329%. The proposed sensor has a broad application prospect in blood glucose detection of diabetic patients due to the advantages of miniaturization, high sensitivity, and good stability.

Voltage, thermal and magnetic field fiber sensors based on magnetic nanoparticles-doped photonic liquid crystal fibers.

In this article, highly sensitive voltage, thermal and magnetic field fiber sensors were obtained in magnetic nanoparticles-doped E7 liquid crystals filled into photonic crystal fibers (PLCF). The voltage and temperature sensitivity reached at 12.598 nm/V and -3.874 nm/°C, respectively. The minimum voltage response time is 48.2 ms. The phase transition temperature Tc of liquid crystal with magnetic dopant was reduced from 60 °C to 46 °C. The magnetic field sensor based on magnetic nanoparticles-doped PLCF were obtained with sensitivity of 118.2 pm/mT from 400 to 460 mT.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines.

A europium(III) metal-organic framework (MOF), namely, {[[(CH3)2NH2]3Eu2(DTTP-2OH)2(HCOO)(H2O)]·4H2O}n (Eu-MOF, H4DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H2O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10-4 S cm-1) at room temperature with a maximum conductivity of 1.91 × 10-3 S cm-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 µM for tetracycline, 0.13 µM for oxytetracycline and 0.11 µM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Comprehensive analysis of mitochondrial dysfunction and necroptosis in intracranial aneurysms from the perspective of predictive, preventative, and personalized medicine.

Mitochondrial dysfunction and necroptosis are closely associated, and play vital roles in the medical strategy of multiple cardiovascular diseases. However, their implications in intracranial aneurysms (IAs) remain unclear. In this study, we aimed to explore whether mitochondrial dysfunction and necroptosis could be identified as valuable starting points for predictive, preventive, and personalized medicine for IAs. The transcriptional profiles of 75 IAs and 37 control samples were collected from the Gene Expression Omnibus (GEO) database. Differentially expressed genes (DEGs), weighted gene co-expression network analysis, and least absolute shrinkage and selection operator (LASSO) regression were used to screen key genes. The ssGSEA algorithm was performed to establish phenotype scores. The correlation between mitochondrial dysfunction and necroptosis was evaluated using functional enrichment crossover, phenotype score correlation, immune infiltration, and interaction network construction. The IA diagnostic values of key genes were identified using machine learning. Finally, we performed the single-cell sequencing (scRNA-seq) analysis to explore mitochondrial dysfunction and necroptosis at the cellular level. In total, 42 IA-mitochondrial DEGs and 15 IA-necroptosis DEGs were identified. Screening revealed seven  key genes invovled in mitochondrial dysfunction (KMO, HADH, BAX, AADAT, SDSL, PYCR1, and MAOA) and five genes involved in necroptosis (IL1B, CAMK2G, STAT1, NLRP3, and BAX). Machine learning confirmed the high diagnostic value of these key genes for IA. The IA samples showed  higher expression of mitochondrial dysfunction and necroptosis. Mitochondrial dysfunction and necroptosis exhibited a close association. Furthermore, scRNA-seq indicated that mitochondrial dysfunction and necroptosis were preferentially up-regulated in monocytes/macrophages and vascular smooth muscle cells (VSMCs) within IA lesions. In conclusion, mitochondria-induced necroptosis was involved in IA formation, and was mainly up-regulated in monocytes/macrophages and VSMCs within IA lesions. Mitochondria-induced necroptosis may be a novel potential target for diagnosis, prevention, and treatment of IA.

Identification of Potentially Functional Circular RNA/Long Noncoding RNA-MicroRNA-mRNA Regulatory Networks Associated with Vascular Injury in Type 2 Diabetes Mellitus by Integrated Microarray Analysis.

This research is aimed at figuring out the potential circular RNA (circRNA)/long noncoding RNA- (lncRNA-) microRNA- (miRNA-) mRNA regulatory networks associated with a vascular injury in type 2 diabetes mellitus (T2DM). Differentially expressed genes (DEGs) screened in T2DM-related expression datasets were intersected with genes associated with vascular injury in T2DM to obtain candidate DEGs, followed by the construction of an interaction network of DEGs. The upstream miRNAs of candidate genes were predicted by mirDIP, miRWalk, and DIANA TOOLS databases, and the upstream lncRNAs/circRNAs of miRNAs by DIANA-LncBase/circBank database, followed by the construction of circRNA/lncRNA-miRNA-mRNA regulatory networks. Peripheral blood was attained from T2DM patients with macroangiopathy for clinical validation of expression and correlation of key factors. Differential analysis screened 37 candidate DEGs correlated with vascular injury in T2DM. Besides, MAPK3 was a core gene associated with vascular injury in T2DM. Among the predicted upstream miRNAs of MAPK3, miR-4270, miR-92a-2-5p, miR-423-5p, and miR-613 ranked at the top according to binding scores. The upstream lncRNAs and circRNAs of the 4 miRNAs were further predicted, obtaining 11 candidate lncRNAs and 3 candidate circRNAs. Moreover, KCNQ1OT1, circ_0020316, and MAPK3 were upregulated, but miR-92a-2-5p was downregulated in the peripheral blood of T2DM patients with macroangiopathy. Mechanistically, KCNQ1OT1 and circ_0020316 bound to miR-92a-2-5p that inversely targeted MAPK3. Collectively, KCNQ1OT1/circ_0020316-miR-92a-2-5p-MAPK3 coexpression regulatory networks might promote vascular injury in T2DM.

High strength and biodegradable dielectric film with synergistic alignment of chitosan nanofibrous networks and BNNSs.

The development of biodegradable and robust dielectric capacitors with high breakdown strength and energy density are indispensable. Herein, the high strength chitosan/edge hydroxylated boron nitride nanosheets (BNNSs-OH) dielectric film was fabricated via combining the dual chemically-physically crosslinking and the drafting orientation strategy, which could induced BNNSs-OH and chitosan crosslinked network alignment within the film via covalent and hydrogen bonding interaction, leading to the comprehensive reinforcement of tensile strength from 126 to 240 MPa, the Eb from 448 to 584 MV m-1, the in-plane thermal conductivity from 1.46 to 5.95 W m-1 K-1 and energy storage density from 7.22 to 13.71 J cm-1, superior than the comprehensive evaluation of the reported polymer dielectrics. The dielectric film could be completely degraded in soil in 90 days, which opened a new path for the development of next-generation environment-friendly dielectrics with excellent mechanical and dielectric properties.