Specific recognition and determination of trace phthalic acid esters by molecularly imprinted polymer based on metal organic framework.

A novel hybrid material (ZIF-7-NH2@MIP) combining high adsorption capacity of amino-functional zeolitic imidazolate framework and specific recognition ability of dual-template molecular imprinted polymer was synthesized. The prepared ZIF-7-NH2@MIP was characterized by a range of instrumental techniques and combined with high performance liquid chromatography for the detection of four phthalate esters. The limits of detection of the four PAEs were below the maximum residue limit of GB 3838-2002 in China, ranging from 0.04 to 0.08 µg L-1. The recoveries of the three real samples of mineral water, carbonated drinks and pulpy juices spiked at 10 µg L-1 were 88.68-98.58% and the relative standard deviations was 1.19-3.40%. The above results showed that the obtained absorbent exhibited many advantages for extracting analytes in aqueous solution especially complex environment due to the combination of the superior hydrothermal and large specific surface area of the amino-functionalized ZIF-7-NH2 and the specific identification of the dual-template molecular imprinted polymer.

Efficient and selective solid-phase microextraction of polychlorinated biphenyls by using a three-dimensional covalent organic framework as functional coating.

Developing functional fiber coating for selective solid phase microextraction (SPME) of trace pollutants is critical in environmental analysis. Herein, the novel covalent organic frameworks (COFs) with three-dimensional (3D) frameworks and multiple interactions were designed and presented for the selective SPME of polychlorinated biphenyls (PCBs). Using tetra (p-aminophenyl) methane (TAM) and 1,3,5-triformylphloroglucinol (Tp) as the monomers, the 3D TpTAM-COF was synthesized and possessed a large specific surface area, high thermal stability, and spatial selectivity toward PCBs. Characterizations such as morphology, XPS, XRD, thermal stability, and enhancement factors (EFs) were studied. Multiple interactions including π-π conjugation, hydrophobic interaction, and selectivity toward non-planar structure were adopted, which resulted in a superior adsorption affinity toward PCBs on TpTAM-COF. Under the optimal conditions, the spatial selectivity toward PCBs, organic analogs (o-dichlorobenzene, biphenyl) and polycyclic aromatic hydrocarbons (naphthalene, pyrene, and anthracene)) was achieved. Efficient and selective adsorption of fifteen PCBs was fulfilled with the highest EF up to 10305. Using the HS-SPME-GC-MS method, the recoveries of PCBs in the river water and soil samples were determined to be 84.8 ± 7.8% ∼ 117.2 ± 8.5% (n = 3) and 84.4 ± 8.6% ∼ 114.7 ± 7.6% (n = 3), respectively. Compared with most commercial SPME fibers and other COFs-based fibers, the resultant TpTAM-COF-coated fibers possessed higher selectivity and EFs of PCBs. It proposed a promising approach for selective SPME of trace PCBs by multiple interactions in the steric structure of 3D COFs.

Aptamer-functionalized metal-organic framework-coated nanofibers with multi-affinity sites for highly sensitive, selective recognition of ultra-trace microcystin-LR.

A novel aptamer-functionalized metal-organic framework nanofibrous composite (viz. PAN/UiO@UiO2-N3-aptamer) with a high aptamer coverage density was proposed based on the electrospinning and seeded growth method, and used for specific affinity recognition of trace Microcystin-LR (MC-LR). Heterobifunctional ligand was used to modify the metal-organic framework nanoparticles (MOF NPs) surface, which could passivate the MOF surface with respect to unmodified DNA, followed by coupling massive aptamers on MOF of the solid-phase microextraction (SPME) fiber using click chemistry. Characterizations including morphology, spectra analysis, mechanical stability, binding capacity and specificity were fulfilled. Applied to the analysis of MC-LR, the good selective and sensitive recognition were obtained with the detection limit as low as 0.003 ng/mL, which was better than most non-specific SPME or solid-phase extraction (SPE) protocols. The stability and reproducibility were acceptable, and the intra-day, inter-day and column-to-column relative standard deviations (RSDs) for the recovery of MC-LR were gained in the range from 2.5% to 14.3%, respectively. Satisfactory recoveries of MC-LR in environmental water samples were measured as 96.3 ± 4.7% - 98.9 ± 2.7% (n = 3) in tap water, 94.4 ± 2.5% - 96.1 ± 3.5% (n = 3) in pond water, and 97.0 ± 2.1% - 97.9 ± 3.1% (n = 3) in river water, respectively. This work demonstrated that the electrospun nanofibrous composite with massive aptamers would be a better alternative for ultra-trace MC-LR detection with good selectivity, matrix-resistance ability and high resolution.

Facile DNA adsorption enabling ammonium-based hydrophilic affinity monolithic column for high-performance online selective microextraction of ochratoxin A.

Herein, a facile protocol of simple DNA adsorption on UV-initiated polymerization supports was proposed for effectively fabricating aptamer-based affinity monolithic column. Hydrophilic cationic monolith with an excellent mechanical stability was achieved within 7 min and then massive aptamers were directly bound by DNA charge-dependent adsorption. Strong cationic quaternary ammonium-based monomer was employed to provide effective and stable positive charge surface for aptamer immobilization in a wide range of pH. An ultra-high aptamer coverage density of 6813 pmol/µL was achieved to gain a highly specific online recognition performance. Limitations such as low aptamer capacity, tedious modification and time-consuming reactions in the traditional biological or covalent modification strategies were avoided. By using ochratoxin A (OTA) as the given analyte, the selective recognition and high recoveries were successfully achieved, and little cross-reactivity towards OTB analogue was only 0.5% even if the content of OTB got up to 125 folds of OTA. Applied to sample analysis, the satisfactory discriminations of trace OTA were obtained at 93.9 ± 1.9% - 96.5 ± 1.7%（n = 3）in beer, wheat and chicken liver samples. It might light a cost-effective access to efficiently preparing high-performance affinity monoliths towards the selective in-tube microextraction of OTA.

Aptamer-functionalized metal-organic framework-based electrospun nanofibrous composite coating fiber for specific recognition of ultratrace microcystin in water.

A novel aptamer@AuNPs@UiO-66-NH2 electrospun nanofibrous coating fiber for specific recognition of microcystin-LR (MC-LR) was proposed by using electrospinning, metal-organic frameworks (MOF) seed growth and AuNPs bridging aptamer strategies. Characterization of morphology, structure and stability of the obtained affinity nanofibrous coating fiber were investigated. High loading of MOFs and aptamers on the nanofibrous fiber were achieved and successfully applied for accurate identification of MC-LR by solid-phase microextraction (SPME) coupled with LC-MS. Highly specific recognition of MC-LR with little interference of analogs was achieved with extremely low LOD (0.004 ng/mL), good precision (CV% < 11.0%) and low relative error (RE% = -1.5% to -10.0%), which was rather better than that of the traditional SPME or SPE protocols. Satisfactory recoveries of MC-LR were obtained in the range of 92.0-96.8% (n = 3) in fortified tap water, raw pond water and river water samples. This work revealed an attractive alternative access to specific recognition and super-sensitive analysis of MC-LR in water.

In situ photo-initiated polymerized oligonucleotide-functionalized hydrophilic capillary affinity monolith for highly selective in-tube microextraction of ochratoxin A mycotoxin.

A photo-initiated polymerized oligonucleotide-grafted hydrophilic affinity monolithic column was synthesized in situ, and exploited for selective in-tube solid phase micro-extraction (IT-SPME) protocol towards the sensitive detection of ochratoxin A (OTA). Only 7 min was required for the rapid polymerization of aptamer-based affinity monolith, which was much less than the reaction time of most thermal polymerization (12-16 h) and sol-gel chemistry methods (up to 52 h). Characterizations such as polymerization recipes, structure morphology, FTIR spectrum, elemental mapping, mechanical stability, and specific recognition performance were evaluated. A significantly hydrophilic nature with a low contact angle of 15° was observed, and a mixed-mode mechanism including aptamer affinity recognition and hydrophilic interaction (HI) was employed. By coupling with HPLC-fluorescence detection, the highly specific online recognition performance was achieved with an extremely low nonspecific adsorption of the analogues. The calibration curve of OTA was obtained in the concentration range 0.05-50.00 ng·mL-1 with a limit of detection (LOD, S/N = 3) of 0.012 ng·mL-1. Applied to sample analysis, acceptable recovery yields of 95.1 ± 1.4% - 99.5 ± 2.2% (n = 3) were obtained in beer and red wine. The proposed method lighted a promising way to efficiently preparing a hydrophilic aptamer-affinity monolith for highly specific recognition of trace mycotoxin by IT-SPME coupled with HPLC. A hydrophilic oligonucleotide-based affinity capillary monolith was explored via in situ photopolymerization for overcoming low preparation efficiency and achieving high-performance online IT-SPME of OTA mycotoxin.

A facile aptamer immobilization strategy to fabricate a robust affinity monolith for highly specific in-tube solid-phase microextraction.

Developing a functional affinity monolithic column towards in-tube solid-phase microextraction (IT-SPME) for selective sample pretreatment is critical. Herein, a high-performance capillary affinity monolithic column with an ultra-high aptamer coverage density was rapidly fabricated via a simple adsorption strategy, in which aptamers with natural sequences were directly immobilized on an ammonium-based strongly cationic matrix. Limitations of the traditional biological or covalent methods such as time-consuming modification reactions, special requirement of active groups (e.g. -NH2 and -SH) on the aptamer, and low aptamer coverage density levels were avoided. An ultra-high coverage density of 8616 pmol µL-1 was achieved with excellent stability, and the highest aptamer-modification level among all the current methods was reached. Selective recognition and high recovery yields of the model mycotoxin ochratoxin A (OTA) were achieved in 95.9 ± 0.98%-97.9 ± 0.28% (n = 3). In particular, there was little cross-reactivity towards the OTB analogue of only 0.5% even in the case of 250 fold of the analogue OTB, which was not reported in previous affinity monoliths. Upon sample analysis, satisfactory discriminations of trace OTA were obtained at 93.7 ± 1.4%-95.5 ± 2.5% (n = 3) in beer and wheat. A facile and direct method for efficiently fabricating an aptamer-based affinity monolith towards online selective IT-SPME was proposed.

Static Retention of Dynamic Chiral Arrangements for Achiral Shear Thinning Metal-Organic Colloids.

Chiral compounds are known to be important not only because they are the fundamental components of living organisms, but also for their unique chiroptical properties. In recent years, scientists have fabricated several chiral organic supramolecular aggregates by using chiral physical fields, such as vortex flow. Herein, the relationship between dynamic chiroptical properties and rheological nature is discussed, suggesting the shear thinning properties of non-Newtonian fluids might help colloidal particles adopt a chiral arrangement in vortices. Furthermore, the storage modulus of colloids could be increased by adding a linking agent, which successfully kept the dynamic chiroptical properties in the static state. Moreover, the salt effect on the host-guest interaction involved in the colloids was studied, the results suggested a significant enhancement of the transferred dynamic circular dichroism for the achiral guest molecule.

Towards highly specific aptamer-affinity monolithic column by efficient UV light-initiated polymerization in "one-pot".

Time-consuming or tedious operation in multiple-step process might is the obstacle for efficiently preparing aptamer-affinity monolithic column. Here, a new and facile strategy to prepare aptamer-based hybrid affinity monolith in "one-pot" at room temperature was exploited, in which UV light-initiated free-radical polymerization and "thiol-ene" click reaction were implemented simultaneously. Only 7 min was cost for finishing the polymerization reaction, which was only 1/100 of that for the traditional thermal polymerization. Using ochratoxin A (OTA) as the model analyte, the recipe for photo-initiated polymerization was optimized, and SEM morphology, FTIR, EDS, pore size distribution and specific recognition performance were also studied. Compared with traditional thermal polymerization, the resultant monolith was achieved more facilely and displayed better results such as more homogeneous skeleton structure, higher reaction efficiency of aptamer (>88.2%) and better specific selectivity to OTA. Besides, an extremely low nonspecific adsorption of analogues was obtained and showed a level at only 1/25 of that in the similar aptamer-affinity monolith prepared by thermal polymerization. Applied to beer and red wine samples, good recovery yields about 99.7 ± 4.0% -101.2 ± 2.3% (n = 3)was achieved with the acceptable RSDs. It would open up a rapid and promising access to efficiently preparing high-performance aptamer-based affinity monolithic columns for online specific recognition.

Heteroporous 3D covalent organic framework-based magnetic nanospheres for sensitive detection of bisphenol A.

Covalent organic frameworks (COFs) showed great promise in effective adsorption of target molecule via size selectivity. Although various magnetic 2D COFs composites have been studied and exhibited the intensive applications, the incorporation of 3D COFs and magnetic nanoparticles to form a new class of magnetic adsorbents with enhanced function still has no reports. Herein, a novel Fe3O4@3D COF with heteroporous structure matching to the sizes of bisphenol A (BPA) was firstly synthesized for better adsorption of BPA than common magnetic 2D-COFs. Three Fe3O4@3D COFs nanospheres were synthesized under the solvothermal conditions in autoclave, and the optimum Fe3O4@3D-COF denoted as Fe3O4@COF-TpTAM (Tp, 1,3,5-triformylphloroglucinol; TAM, tetra(p-aminophenyl)-methane) was selected and employed. Detailed characteristics of Fe3O4@COF-TpTAM were evaluated via various techniques including TEM, FTIR, TGA, XRD and BET. Excellent chemical and thermal stability, high surface area (294.6 m2 g-1) and pore volume (0.2 m3 g-1) with multiple pore sizes comparable with the simulated three-dimensional sizes of BPA were exhibited. A high adsorption capacity of BPA up to 209.9 mg/g that was better than common 2D-COFs was achieved, and the sensitive MSPE-LC-MS method with wide linear range (10-5000 pg/mL), low detection limit (4 pg/mL, S/N = 3) was built. Satisfactory recoveries of BPA as 93.8 ± 1.4%-101.4 ± 5.1% (n = 3) and 100.4 ± 1.9% ~ 107.3 ± 1.2% (n = 3) were obtained in milk and river water samples, respectively. This work demonstrates the promising application of Fe3O4@3D COF as efficient adsorbents of trace BPA, and opens up a new access for the efficient MSPE in sample pretreatment for food or environmental safety analysis.

Circularly Polarized Luminescence of Achiral Metal-Organic Colloids and Guest Molecules in a Vortex Field.

Recently, scientists have reported a range of chiral fluorescence materials or chiral composites that can emit circularly polarized luminescence. Herein, two achiral metal-organic colloidal solutions were studied, showing active circularly polarized luminescence, which is observed in vortex stirring. The absolute values for glum are 0.05 and 0.03 and the plus or minus sign of glum depends on the colloidal structure and stirring direction, which make the property easy to manipulate. Further, the host-guest interaction study suggests both electrostatic interactions and coordination bonding may influence the chiroptical property from the colloidal solution to the guest molecule. Rhodamine 6G and its carboxylic acid derivative exhibit good quantum yields and acceptable glum values in the colloidal solution.

A novel adsorbent based on aptamer prepared via "thiol-ene" click for specific recognition of phthalic acid esters.

In this paper, a novel adsorbent based on aptamer was prepared via "thiol-ene" click chemistry reaction and used for selective adsorbing the trace phthalic acid esters (PAEs) from drinking water and juice samples, which depended on the group selectivity of aptamers to the ester and the benzoyl groups of PAEs. The morphological structures of the obtained adsorbents were characterized by Fourier Transform infrared spectroscopy (FT-IR), fluorescence spectra, Energy Dispersive Spectrometer (EDS), Brunauer-Emmett-Teller (BET). The selectivity of the prepared adsorbent was evaluated and the results showed that the recovery of the adsorbent with aptamer for PAEs was 66.10-108.90%, while the recovery of adsorbent without aptamer was only 32.41-37.59%. The limit of detection (LOD) (S/N = 3) and limit of quantitation (LOQ) (S/N = 10) of PAEs coupled with HPLC-UV were obtained in the range of 0.11-0.88 µg L-1 and 0.22-1.33 µg L-1, respectively. This work gave a facile and efficient approach to for specific enrichment and highly sensitivity detection of PAEs.

Towards online specific recognition and sensitive analysis of bisphenol A by using AuNPs@aptamer hybrid-silica affinity monolithic column with LC-MS.

Highly specific sample pretreatment for the sensitive detection of trace bisphenol A (BPA) in compliacted samples is critical. Herein, a new protocol towards online specific recognition and sensitive detection of BPA was proposed by using Aptamer@AuNPs-modified affinity monolith coupled with LC-MS. Optimization of polymerization conditions and characterization such as the morphology, energy spectrum, mechanical stability, aptamer coverage density and specific performance of the affinity monolith were studied. Nano-gold particles (AuNPs) densely distributed on the rigid hybrid-silica substrates, and an unusually high aptamer coverage density reached 3388 pmol/µL, which was favorable to fulfill the effective identification of BPA with high selectivity and inhibit the interference of analogs including BPB and BPC. A highly sensitive recognition of BPA was obtained with the limit of detection (LOD) as low as 0.02 ng/mL. Applied to dairy milk products and serum samples, trace BPA could be sensitive detected by this strategy, while the poor response was achieved by using traditional non-specific SPE column for sample pretreatment. Satisfactory recoveries of fortified BPA were measured as 97.45 ± 2.24%-98.03 ± 4.36% (n = 3) in powdered infant formulas, 96.64 ± 3.37% ~ 99.42 ± 3.22% (n = 3) in bottled milk, 94.69 ± 2.15% ~ 100.96 ± 1.94% (n = 3) in boxed milk, and 93.71 ± 1.53% ~ 96.73 ± 2.56% (n = 3) in children serum samples, respectively. This protocol lights a new access to online specific identification of trace BPA from complex matrix with good detection sensitivity by using aptamer-affinity monolithic column.

Online high-efficient specific detection of zearalenone in rice by using high-loading aptamer affinity hydrophilic monolithic column coupled with HPLC.

Via the facile photopolymerization and thiol-ene click chemistry, a hydrophilic polyhedral oligomeric silsesquioxane (POSS)-containing affinity monolithic column with a high load of aptamers and fast preparation was presented, and successfully applied to the efficient specific recognition and sensitive detection of zearalenone (ZEN) by coupling with HPLC. Optimization of polymerization reaction and polymer recipe were studied, and characteristics such as structural morphology, affinity performance and specificity to ZEN were evaluated. A highly hydrophilic POSS-based aptamer affinity monolith was rapidly prepared in 1.1 h, and a high capacity of aptamer reached 2772.61 pmol/µL that was much higher than that of the current POSS-based aptamer affinity monoliths. By this way, the hydrophilic nature and aptamer coverage indensity in POSS monoliths were well improved. The mixed-mode mechanism including aptamer affinity recognition and hydrophilic interaction were employed for the specific analysis of ZEN. Applied to the monitoring of ZEN, a good selective recognition and sensitive detection were obtained with the detection limit (LOD) of 0.02 ng/mL. The stability and reproducibility were acceptable and the intra-day, inter-day and column-to-column relative standard deviations (RSDs) of the ZEN recovery were gained in the range from 2.28% to 5.32%, respectively. Satisfactory recoveries of ZEN in rice samples were realized ad 98.6 ± 2.8%-100.8 ± 2.0%. It might provide a preferable access to online specific analysis of ZEN via the hydrophilic POSS-based affinity monolith with a large capacity of aptamers and a high preparation efficiency.

Facile preparation of stainless steel microextraction fiber via in situ growth of metal-organic framework UiO-66 and its application to sensitive analysis of polycyclic musks.

A functional stainless steel microextraction fiber easily prepared by in situ growing metal-organic framework UiO-66 was presented and used for high-performance analysis of polycyclic musks. Via the robust Ag-SH bonding reaction, mercaptoacetic acid was easily anchored on Ag film to provide carboxyl group on the stainless steel fiber, then in situ grown UiO-66 was fulfilled via the coordination reaction between Zr4+ and carboxyl group. Good characteristics including large surface area, high thermal stability, and good adsorption property were achieved. Sensitive detection limits (0.015-0.040 ng/L) were achieved for polycyclic musks by coupling with gas chromatography with mass spectrometry, and it could be stable enough for 150 extraction cycles without a significant loss of extraction efficiency. Compared with the classical commercial fibers, 2.2-11.4 times higher enhancement factors were shown. Applied to the analysis of fortified river water samples, five typical polycyclic musks were well detected with the recoveries of 90.2-101.8%, respectively. It showed a facile approach for preparing stainless steel microextraction fiber via chemically bonding in situ grown metal-organic framework for high-performance enrichment.

Towards high-efficient online specific discrimination of zearalenone by using gold nanoparticles@aptamer-based affinity monolithic column.

Sensitive and specific analysis of zearalenone (ZEN) mycotoxin in cereals for ensuring food safety is critical and remains challenging. Herein, a new gold nanoparticles @aptamer-functionalized hybrid affinity monolithic column was proposed and employed for online specific recognition of ZEN by HPLC. Characterization on the morphology, Brunauer-Emmett-Teller (BET) surface area mechanical stability and specific performance of the obtained affinity monolith were investigated. A super-high aptamer coverage density could reach 3636 pmol/µL, which is preferable to gain an effective analysis of ZEN with high specificity and a low interference of co-existed substances including typical α-Zearalenol (α-ZOL) and Aflatoxin B1 (AFB1). The sensitive recognition of trace ZEN was obtained with the limit of detection (LOD) as low as 0.05 ng/mL. Applied to real cereal samples, satisfactory recoveries were obtained in the range of 91.6 ± 1.4%-97.8 ± 2.6% (n = 3) in corn, 93.8 ± 3.1%-95.0 ± 3.6% (n = 3) in wheat, and 90.9 ± 4.7%-94.7 ± 3.8% (n = 3) in rice, respectively. The results on quantitative analysis were similar to that of LC-MS and better than that obtained by using immunoaffinity column (IAC) or molecularly imprinted polymer (MIP). This protocol provided an efficient access to high-efficient online specific recognition of ZEN in cereals by using such an aptamer-affinity capillary monolithic column.

A double-recognized aptamer-molecularly imprinted monolithic column for high-specificity recognition of ochratoxin A.

In this study, a double-recognized aptamer-molecularly imprinted monolithic column (Apt-MIP monolithic column) was prepared by introducing both aptamer and MIP to reduce non-specific adsorption. Its preparation parameters such as the time of photo-initiation, the dosage of photo-initiator and the concentration of aptamer were investigated in detail. The recovery ratios of ochratoxin A (OTA) to ochratoxin B (OTB) on Apt-MIP monolithic column, Apt monolithic column and MIP monolithic column were 116.1, 40.8 and 69, respectively. Even if the concentration of OTB was 10 times that of OTA, the recovery of OTB was only about 2.9%. Applied to beer samples, the prepared Apt-MIP monolithic column drastically resisted background adsorption and the high-specificity recognition for OTA was obtained with the recoveries of 95.5-105.9%. This work provided a simple and effective method to selectively identify OTA from complex samples.

Amphiphilic gemini-iridium (III) complex for rapid and selective detection of picric acid in water and intracellular.

Inspired by the structure and properties of gemini surfactant, a novel amphiphilic gemini-iridium complex (GIC-Ir) has been developed, which can spontaneously form vesicles by self-assembly and exhibit excellent dispersibility and high emission intensity in water. The emission of GIC-Ir can be rapidly and selectively quenched by picric acid (PA) due to the aromatic groups and two long-chain quaternary ammonium (QA) groups with positive charge, which endow GIC-Ir vesicles outstanding capability to capture negatively charged PA, and greatly promote the interaction between GIC-Ir and PA. Theoretical calculations and spectral studied indicated that the photoinduced electron transfer and resonance energy transfer may be responsible to the emission quenching. Furthermore, the real water samples and in vitro studies further prove that GIC-Ir can be used as a promising chemosensor for the detection of PA both in water and intracellular.

Highly efficient preparation of ß-CD-based chiral monolithic column by "one-pot" hydroxymethyl polycondensation for enantioseparation in capillary liquid chromatography.

A facile strategy for highly efficient fabrication of chiral monolithic column was carried out by the simple "one-pot" hydroxymethyl polycondensation of native ß-cyclodextrin (ß-CD) and urea-formaldehyde (UF). In-situ rapid substitution of native ß-CD and efficient polycondensation of ß-CD products and UF oligomers was proposed and fulfilled in one pot. The feasibility, mechanism and key parameters of polycondensation reaction were discussed. The data on crosslinking polycondensation and reaction kinetics were further evaluated. Characteristics including the morphologies, permeability and structure stability of the resultant monolithic columns were also studied. Under the optimal conditions, the "one-pot" hydroxymethyl polycondensation was accomplished in an aqueous solution within only 10 mins. Satisfactory stability and repeatability were gained, and good enantioseparation of eight model enantiomers was successfully achieved with the resultant ß-CD-based monolith. It was simple and highly efficient, and the organic solvents, special CD derivatives and tediously long-time polymerization reaction were successfully avoided, which might light a new access to rapid preparation of CD-chiral monolith for high-performance enantioseparation.

Preparation and evaluation of highly hydrophilic aptamer-based hybrid affinity monolith for on-column specific discrimination of ochratoxin A.

Nonspecific adsorption is a challenge of specific recognition on aptamer-based affinity monoliths. Here, a novel highly hydrophilic polyhedral oligomeric silsesquioxane (POSS)-containing aptamer-based hybrid-silica affinity monolith with a good recognition nature was prepared and used for specific discrimination of ochratoxin A (OTA). A homogeneous polymerization mixture consisted of POSS chemicals, hydrophilic monomers and aptamer solution was directly polymerized via the "one-pot" method. Preparation and characterization of the resultant affinity monolith were studied in detail. A highly hydrophilic nature was obtained and the typical hydrophilic interaction liquid chromatography (HILIC) was observed when acetonitrile (ACN) content in mobile phase was 25%, which reached the highest hydrophilicity of POSS-based hybrid monoliths. By using OTA as model analyte, the nonspecific adsorption was effectively suppressed. The recovery of the analogue ochratoxin B (OTB) was only about 0.1% even if the content of OTB was 50 times more than OTA, which was much better than other POSS-containing monoliths and polar siloxane-based hybrid monoliths. Applied to beer samples, the adsorption of background materials was drastically resisted, and efficient recognition of OTA was obtained with the recoveries of 94.9-99.8%. Much less disturbance was observed than that occurred in hydrophobic POSS-based affinity monolith. It lights an attractive implement with high hydrophilicity and specificity for online selective recognition of OTA.