Terahertz communication: detection and signal processing.

The development of 6 G networks has promoted related research based on terahertz communication. As submillimeter radiation, signal transportation via terahertz waves has several superior properties, including non-ionizing and easy penetration of non-metallic materials. This paper provides an overview of different terahertz detectors based on various mechanisms. Additionally, the detailed fabrication process, structural design, and the improvement strategies are summarized. Following that, it is essential and necessary to prevent the practical signal from noise, and methods such as wavelet transform, UM-MIMO and decoding have been introduced. This paper highlights the detection process of the terahertz wave system and signal processing after the collection of signal data.

An infrared photothermoelectric detector enabled by MXene and PEDOT:PSS composite for noncontact fingertip tracking.

Photothermoelectric (PTE) detectors functioning on the infrared spectrum show much potential for use in many fields, such as energy harvesting, nondestructive monitoring, and imaging fields. Recent advances in low-dimensional and semiconductor materials research have facilitated new opportunities for PTE detectors to be applied in material and structural design. However, these materials applied in PTE detectors face some challenges, such as unstable properties, high infrared reflection, and miniaturization issues. Herein, we report our fabrication of scalable bias-free PTE detectors based on Ti3C2 and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composites and characterization of their composite morphology and broadband photoresponse. We also discuss various PTE engineering strategies, including substrate choices, electrode types, deposition methods, and vacuum conditions. Furthermore, we simulate metamaterials using different materials and hole sizes and fabricated a gold metamaterial with a bottom-up configuration by simultaneously combining MXene and polymer, which achieved an infrared photoresponse enhancement. Finally, we demonstrate a fingertip gesture response using the metamaterial-integrated PTE detector. This research proposes numerous implications of MXene and its related composites for wearable devices and Internet of Things (IoT) applications, such as the continuous biomedical tracking of human health conditions.

System design of large-area vertical photothermoelectric detectors based on carbon nanotube forests with MXene electrodes.

Photothermoelectric (PTE) detectors that combine photothermal and thermoelectric conversion have emerged in recent years. They can overcome bandgap limitations and achieve effective infrared detection. However, the development of PTE detectors and the related system design are in the early phases. Herein, we present vertical PTE detectors utilizing the active layer of carbon nanotube forests with MXenes acting as top electrodes. The detector demonstrates its capacity for sensitive infrared detection and rapid infrared response. We also investigated the relationship between photoresponse and different MXene electrode types as well as their thickness, which guides the PTE detector configuration design. Furthermore, we packed the PTE detectors with a polytetrafluoroethylene (PTFE, Teflon) cavity. The photoresponse is improved and the degradation is significantly delayed. We also applied this PTE detector system for non-destructive tracking (NDT) applications, where the photovoltage mapping pattern proves the viability of the imaging track. This work paves the way toward infrared energy harvesters and customized industrial NDT measurement.

Flexible Multi-Element Photothermoelectric Detectors Based on Spray-Coated Graphene/Polyethylenimine Composites for Nondestructive Testing.

Photothermoelectric (PTE) detectors receive much attention owing to the superiority of self-powered, non-bias input, and friendly ambient environments, facilitating abundant prospective applications in industrial inspection, medical diagnostics, homeland security, and wearable Internet of Things. However, many drawbacks of currently applicable PTE materials, involving unstable material oxidation, an uncontrollable fabrication process, and unscalable manufacturing, hinder the development of industrial productions. Herein, we demonstrate a vertical graphene/polyethylenimine composite PTE detector fabricated with an optimized spray-coating method in compact alignment on various surfaces, achieving a significant photovoltage detectivity and responsivity of 6.05 × 107 cm Hz1/2 W-1 and 2.7 V W-1 response at a 973 K blackbody temperature radiation (2.98 µm peak wavelength). In addition, the long-term stability and resistible concave and convex bending flexibility are presented. Furthermore, a nondestructive testing system is established and verified through high-spatial-resolution and high-penetration illustration. Overall, the spray-coated and flexible PTE graphene/polyethylenimine multi-elements with broadband infrared absorption compatibility and stable energy conversion are promising candidates for future health monitoring and wearable electronics.

Fabrication of tunable, high-molecular-weight polymeric nanoparticles via ultrafast acoustofluidic micromixing.

High-molecular-weight polymeric nanoparticles are critical to increasing the loading efficacy and tuning the release profile of targeted molecules for medical diagnosis, imaging, and therapeutics. Although a number of microfluidic approaches have attained reproducible nanoparticle synthesis, it is still challenging to fabricate nanoparticles from high-molecular-weight polymers in a size and structure-controlled manner. In this work, an acoustofluidic platform is developed to synthesize size-tunable, high-molecular-weight (>45 kDa) poly(lactic-co-glycolic acid)-b-poly(ethylene glycol) (PLGA-PEG) nanoparticles without polymer aggregation by exploiting the characteristics of complete and ultrafast mixing. Moreover, the acoustofluidic approach achieves two features that have not been achieved by existing microfluidic approaches: (1) multi-step (≥2) sequential nanoprecipitation in a single device, and (2) synthesis of core-shell structured PLGA-PEG/lipid nanoparticles with high molecular weights. The developed platform expands microfluidic potential in nanomaterial synthesis, where high-molecular-weight polymers, multiple reagents, or sequential nanoprecipitations are needed.

Correction: On-chip stool liquefaction via acoustofluidics.

Correction for 'On-chip stool liquefaction via acoustofluidics' by Shuaiguo Zhao et al., Lab Chip, 2019, 19, 941-947, DOI: .

A disposable acoustofluidic chip for nano/microparticle separation using unidirectional acoustic transducers.

Separation of nano/microparticles based on surface acoustic waves (SAWs) has shown great promise for biological, chemical, and medical applications ranging from sample purification to cancer diagnosis. However, the permanent bonding of a microchannel onto relatively expensive piezoelectric substrates and excitation transducers renders the SAW separation devices non-disposable. This limitation not only requires cumbersome cleaning and increased labor and material costs, but also leads to cross-contamination, preventing their implementation in many biological, chemical, and medical applications. Here, we demonstrate a high-performance, disposable acoustofluidic platform for nano/microparticle separation. Leveraging unidirectional interdigital transducers (IDTs), a hybrid channel design with hard/soft materials, and tilted-angle standing SAWs (taSSAWs), our disposable acoustofluidic devices achieve acoustic radiation forces comparable to those generated by existing permanently bonded, non-disposable devices. Our disposable devices can separate not only microparticles but also nanoparticles. Moreover, they can differentiate bacteria from human red blood cells (RBCs) with a purity of up to 96%. Altogether, we developed a unidirectional IDT-based, disposable acoustofluidic platform for micro/nanoparticle separation that can achieve high separation efficiency, versatility, and biocompatibility.

Open source acoustofluidics.

Over the past several decades, a litany of acoustofluidic devices have been developed which purport to have significant advantages over traditional benchtop analytical tools. These acoustofluidic devices are frequently labeled as "labs-on-chips"; however, many do an insufficient job of limiting their dependence on the lab. Often, acoustofluidic devices still require skilled operators and complex external equipment. In an effort to address these shortcomings, we developed a low-cost, expandable, and multifunctional system for controlling acoustofluidic devices in the audible to low ultrasonic frequency range (31 Hz to 65 kHz). The system was designed around the readily available Arduino prototyping platform because of its user-friendly coding environment and expansive network of open source material; these factors enabled us to create a system capable of generating high voltage oscillatory signals and controlling microscale flows in acoustofluidic devices. Utilizing the established open source system, we achieved a series of acoustofluidic applications involving the manipulation of fluids and biological objects in a portable fashion. In particular, we used our open source acoustofluidic devices to achieve active rotation of cells and microorganisms, and operation of an acoustofluidic mixing device which has previously shown potential for viscous sample preparation, in a portable fashion. Additionally, using low frequency flexural waves and our portable system, we achieved acoustofluidic separation of particles based on size. It is our hope that the open source platform presented here can pave the way for future acoustofluidic devices to be used at the point-of-care, as well as simplify the operation of these devices to enable resource limited users to leverage the benefits of acoustofluidics in their work.

On-chip stool liquefaction via acoustofluidics.

Microfluidic-based portable devices for stool analysis are important for detecting established biomarkers for gastrointestinal disorders and understanding the relationship between gut microbiota imbalances and various health conditions, ranging from digestive disorders to neurodegenerative diseases. However, the challenge of processing stool samples in microfluidic devices hinders the development of a standalone platform. Here, we present the first microfluidic chip that can liquefy stool samples via acoustic streaming. With an acoustic transducer actively generating strong micro-vortex streaming, stool samples and buffers in microchannel can be homogenized at a flow rate up to 30 µL min-1. After homogenization, an array of 100 µm wide micropillars can further purify stool samples by filtering out large debris. A favorable biocompatibility was also demonstrated for our acoustofluidic-based stool liquefaction chip by examining bacteria morphology and viability. Moreover, stool samples with different consistencies were liquefied. Our acoustofluidic chip offers a miniaturized, robust, and biocompatible solution for stool sample preparation in a microfluidic environment and can be potentially integrated with stool analysis units for designing portable stool diagnostics platforms.