Cobalt-aluminum spinel supported on modified γ-alumina for peroxymonosulfate activation: Si-Al ratio of support to optimize performance and reusability.

The development of cobalt-based supported catalysts with high PMS catalytic activity and stability by adjusting the composition of the support is highly desirable yet remains scarce. In the work, a series of catalysts (Co2AlO4/Al2O3-xSiO2) were prepared by impregnation and high-temperature calcination using Al2O3-xSiO2 with a low Si-Al ratio as the support. Measurement techniques such as XRD, XPS, UV-DRS, FTIR, BET, SEM and HRTEM were used to characterize textural and chemical properties (ratio of Co3+/Co2+, specific surface area, pore size, pore volume, etc.). The ratio of Co3+/Co2+ and pore volume of Co2AlO4/Al2O3-xSiO2 can be turned by controlling the ratio of Si to Al, which are closely related to the catalytic performance and reusability of the catalysts. The optimized catalyst (Co2AlO4/Al2O3-0.25SiO2) can completely degrade 10 mg/L p-nitrophenol (PNP) in 40 min in the pH range of 3-9 with excellent reusability. The effects of several reaction parameters (i.e., PMS dosage, Co2AlO4/Al2O3-0.25SiO2 dosage, reaction temperature, initial pH value, and inorganic ions) on PNP removal were comprehensively investigated. Sulfate radical (SO4•-) and singlet oxygen (1O2) are making a major contribution to the degradation of PNP. Moreover, a millimeter-scale catalyst (CoSiAl-0.25/Al2O3 pellet) was prepared by sol adsorption and high-temperature calcination method, which maintained high oxidation activity after treatment of 18 L wastewater (PNP of 10 mg/L) in a continuous flow process. The method is simple and easy to operate on a large scale, providing a new perspective on the design and preparation of cobalt-aluminum spinel catalysts for activated PMS.

Long-acting CoAl2O4 spinel catalyst developed on activated alumina pellets by facile synthesis to activate peroxymonosulfate: Controllable cobalt leaching and environmental adaptability.

A novel composite catalyst prepared by fixing cobalt aluminate (CoAl2O4) spinel on formed alumina carrier by impregnation-calcination route is reported, which can be used to efficiently activate peroxymonosulfate (PMS) to degrade p-nitrophenol (PNP). The internal laws of phase composition and preparation conditions are explored in detail, and the results show that the introduction of additional aluminum ions in the preparation process changes the coordination environment and the electronic state of cobalt ions, which leads to the transformation of spinel/inverted spinel in the composition, and further affects the activity and stability of the catalyst. The selected CoAl-Aaps-600 catalyst has high CoAl2O4 content, showing good cycle performance and low cobalt leaching, and has great catalytic degradation performance at different temperatures and a wide pH range. Most notably, a fixed bed reactor packed with 20 g of CoAl-Aaps-600 exhibits excellent capacity to continuously treat 60 L of PNP solution with acceptable PNP removal ratio and low cobalt leaching content. Sulfate radical and singlet oxygen are identified as the main reactive oxygen species produced in CoAl-Aaps-600/PMS system, and the reaction mechanism is reasonably inferred. This work provides a potential application material and process for the treatment of continuous organic wastewater.

Facile Preparation of Granular Copper Films as Cathode for Enhanced Electrochemical Degradation of Methyl Orange.

In this paper, granular copper films (GCFs) were prepared through electrodeposition in CuSO4 solution containing triethanolamine, and the films were used as electro-Fenton-like cathodes for degradation of methyl orange (MO). The effects of triethanolamine concentration, pH value, current intensity and temperature on the morphology of the films, as well as the MO decolorization ratio (DR), were investigated in detail. Results show that when the concentration of triethanolamine is 0.2 wt%, the prepared GCF exhibits the best performance. Under room temperature and neutral conditions, no external O2 or catalyst, MO is completely decolorized after 240 min. Compared with the commonly used carbon cathode, the GCF cathode can increase the MO decolorization rate by approximately 70.9%. The kinetics of the electrochemical degradation reaction is also discussed.