miR-9-5p and miR-221-3p Promote Human Mesenchymal Stem Cells to Alleviate Carbon Tetrachloride-Induced Liver Injury by Enhancing Human Mesenchymal Stem Cell Engraftment and Inhibiting Hepatic Stellate Cell Activation.

Mesenchymal stem cells (MSCs) have shown great potential for the treatment of liver injuries, and the therapeutic efficacy greatly depends on their homing to the site of injury. In the present study, we detected significant upregulation of hepatocyte growth factor (HGF) in the serum and liver in mice with acute or chronic liver injury. In vitro study revealed that upregulation of miR-9-5p or miR-221-3p promoted the migration of human MSCs (hMSCs) toward HGF. Moreover, overexpression of miR-9-5p or miR-221-3p promoted hMSC homing to the injured liver and resulted in significantly higher engraftment upon peripheral infusion. hMSCs reduced hepatic necrosis and inflammatory infiltration but showed little effect on extracellular matrix (ECM) deposition. By contrast, hMSCs overexpressing miR-9-5p or miR-221-3p resulted in not only less centrilobular necrosis and venous congestion but also a significant reduction of ECM deposition, leading to obvious improvement of hepatocyte morphology and alleviation of fibrosis around central vein and portal triads. Further studies showed that hMSCs inhibited the activation of hepatic stellate cells (HSCs) but could not decrease the expression of TIMP-1 upon acute injury and the expression of MCP-1 and TIMP-1 upon chronic injury, while hMSCs overexpressing miR-9-5p or miR-221-3p led to further inactivation of HSCs and downregulation of all three fibrogenic and proinflammatory factors TGF-ß, MCP-1, and TIMP-1 upon both acute and chronic injuries. Overexpression of miR-9-5p or miR-221-3p significantly downregulated the expression of α-SMA and Col-1α1 in activated human hepatic stellate cell line LX-2, suggesting that miR-9-5p and miR-221-3p may partially contribute to the alleviation of liver injury by preventing HSC activation and collagen expression, shedding light on improving the therapeutic efficacy of hMSCs via microRNA modification.

Cellular senescence in metastatic prostate cancer: A therapeutic opportunity or challenge (Review).

The treatment of patients with metastatic prostate cancer (PCa) is considered to be a long­standing challenge. Conventional treatments for metastatic PCa, such as radical prostatectomy, radiotherapy and androgen receptor­targeted therapy, induce senescence of PCa cells to a certain extent. While senescent cells can impede tumor growth through the restriction of cell proliferation and increasing immune clearance, the senescent microenvironment may concurrently stimulate the secretion of a senescence­associated secretory phenotype and diminish immune cell function, which promotes PCa recurrence and metastasis. Resistance to established therapies is the primary obstacle in treating metastatic PCa as it can lead to progression towards an incurable state of disease. Therefore, understanding the molecular mechanisms that underly the progression of PCa is crucial for the development of novel therapeutic approaches. The present study reviews the phenomenon of treatment­induced senescence in PCa, the dual role of senescence in PCa treatments and the mechanisms through which senescence promotes PCa metastasis. Furthermore, the present review discusses potential therapeutic strategies to target the aforementioned processes with the aim of providing insights into the evolving therapeutic landscape for the treatment of metastatic PCa.

Electrospun PEO/PEG fibers as potential flexible phase change materials for thermal energy regulation.

Polyethylene glycol (PEG) is widely used as phase change materials (PCM) due to their versatile working temperature and high latent heat. However, the low molecular weight of PEG prevents from the formation of flexible microfibers, and the common leakage problem associated with solid-liquid PCM further hinders their applications in various fields. To address these challenges, polyethylene oxide (PEO) is incorporated as the supporting matrix for PEG, leading to a successful electrospinning of fibrous mats. Due to the similar chemical nature of both PEG and PEO, the blended composites show great compatibility and produce uniform electrospun fibers. The thermal properties of these fibers are characterized by DSC and TGA, and supercooling for the PEG(1050) component is effectively reduced by 75-85%. The morphology changes before and after leakage test are analyzed by SEM. Tensile and DMA tests show that the presence of PEG(1050) component contributes to plasticization effect, improving mechanical and thermomechanical strength. The ratio of PEO(600K):PEG(1050) at 7:3 affords the optimal performance with good chemical and form-stability, least shrinkage, and uniformity. These fibrous mats have potential applications in areas of food packaging, flexible wearable devices, or textiles to aid in thermal regulation.

Ultra-high Performance Thermochromic Polymers via a Solid-solid Phase Transition Mechanism and Their Applications.

Thermochromic materials are substances that change colour in response to temperature variations. Today, sustainability concerns are the main drivers of thermochromic research, with smart, energy efficient windows being one of primary applications. While vanadium oxides and leuco dyes are traditionally the main thermochromic materials, hydrogels operating based on change of solvation have risen as some of the most promising materials due to their high optical transparency and good solar modulating abilities. In this work, a distinct mechanism for thermochromism arising from the crystalline solid to amorphous solid polymer transition, with a corresponding transition from an opaque state to a transparent state is disclosed. Both ultra-high optical transparency (Tlum up to 99%) and ultra-high solar modulation (ΔTsolar up to 87%) were observed. The transition temperature was tunable from 11 to 61 ͦ C by tuning the polymer structure. When incorporated into applications such as greenhouse materials and thermoelectric devices, significant performance enhancement was observed, due to the thermochromic material functioning as a thermal valve, speeding up solar heat absorbance while inhibiting the cooling process via its phase transition. This article is protected by copyright. All rights reserved.

The Relationship between Low-Sodium Salt Intake and Both Blood Pressure Level and Hypertension in Chinese Residents.

Compared to common salt, low-sodium salt can reduce blood pressure to varying degrees. However, the exact dosage relationship remains unclear. We aimed to investigate the dose-response relationships between low-sodium salt intake and systolic blood pressure (SBP) and diastolic blood pressure (DBP), as well as the risk of hypertension, and to determine the optimal range for low-sodium salt intake. We investigated the basic characteristics and dietary profile of 350 individuals who consumed low-sodium salt. The samples were divided into three groups according to the 33.3rd and 66.6th percentiles of low-sodium salt intake in condiments (Q1: <4.72 g/d, Q2: ≥4.72 g/d, and <6.88 g/d, and Q3: ≥6.88 g/d). The restricted cubic spline results indicated that low-sodium salt intake decreased linearly with SBP and DBP, while low-sodium intake demonstrated a non-linear, L-shaped relationship with the risk of hypertension, with a safe range of 5.81 g to 7.66 g. The multiple linear regression analysis revealed that compared with group Q1, the DBP in group Q2 decreased by 2.843 mmHg (95%CI: -5.552, -0.133), and the SBP in group Q3 decreased by 4.997 mmHg (95%CI: -9.136, -0.858). Exploratory subgroup analyses indicated that low-sodium salt intake had a significant impact on reducing SBP in males, DBP in females, SBP in rural populations, and DBP in urban populations. The intake of low-sodium salt adheres to the principle of moderation, with 5.81-7.66 g potentially serving as a pivotal threshold.

Microbiota and metabolite alterations in pancreatic head and body/tail cancer patients.

Pancreatic head cancer (PHC) and pancreatic body/tail cancer (PBTC) have distinct clinical and biological behaviors. The microbial and metabolic differences in PHC and PBTC have not been studied. The pancreatic microbiota and metabolome of 15 PHC and 8 PBTC tissues and their matched nontumor tissues were characterized using 16S rRNA amplicon sequencing and untargeted metabolomics. At the genus level, Bradyrhizobium was increased while Corynebacterium and Ruminococcus were decreased in the PHC tissues (Head T) compared with the matched nontumor tissues (Head N) significantly. Shuttleworthia, Bacillus, and Bifidobacterium were significantly decreased in the PBTC tissues (Body/Tail T) compared with the matched nontumor tissues (Body/Tail N). Significantly, Ileibacterium was increased whereas Pseudoxanthomonas was decreased in Head T and Body/Tail T, and Lactobacillus was increased in Head T but decreased in Body/Tail T. A total of 102 discriminative metabolites were identified between Head T and Head N, which were scattered through linoleic acid metabolism and purine metabolism pathways. However, there were only four discriminative metabolites between Body/Tail T and Body/Tail N, which were related to glycerophospholipid metabolism and autophagy pathways. The differential metabolites in PHC and PBTC were commonly enriched in alpha-linolenic acid metabolism and choline metabolism in cancer pathways. Eubacterium decreased in Head T was positively correlated with decreased linoleic acid while negatively correlated with increased arachidyl carnitine and stearoylcarnitine. Bacillus decreased in Body/Tail T was negatively correlated with increased L-carnitine. These microbiota and metabolites deserve further investigations to reveal their roles in the pathogenesis of PHC and PBTC, providing clues for future treatments.

Association between spot urinary sodium-to-potassium ratio and blood pressure among Chinese adults aged 18-69 years: the SMASH study.

Background: Excessive sodium and low potassium intake are involved in the development of hypertension. Growing evidence showed that the sodium-to-potassium ratio (Na/K) was significantly associated with blood pressure (BP). However, studies on the dose-response relationship of spot urinary Na/K ratio with hypertension and BP in the general population are scarce, especially in the Chinese population. Materials and methods: Data from the post-intervention survey of the Shandong Ministry of Health Action on Salt and Hypertension (SMASH) project was analyzed. Associations between Na/K molar ratio and hypertension prevalence and between Na/K molar ratio and BP indices were analyzed using multivariable logistic and linear regression, respectively, followed by subgroup analysis and interaction analysis. The restricted cubic spline model was used to explore the dose-response relationship. Informed by existing literature, we adjusted for potential confounding factors, including temperature and renal function, to assess the association and dose-response relationship. Results: There was a non-linear positive association between Na/K and hypertension (OR:1.09, 95%CI: 1.08-1.11) and a linear positive association between Na/K and systolic BP, diastolic BP, and mean arterial pressure (ß 0.53, 95%CI: 0.45-0.60; ß 0.36, 95%CI: 0.31-0.41; and ß 0.42, 95%CI: 0.36-0.47, respectively). The association was stronger in individuals with hypertension, female patients, those in the 50-59-year age group, and those who were obese. Environmental temperatures had little impact on associations. Conclusion: Our findings provide further evidence that the spot urinary Na/K ratio is a simple, useful, and convenient indicator for monitoring salt reduction and potassium increase, which could be used in clinical and public health practices.

Cyclotriphosphazene: A Versatile Building Block for Diverse Functional Materials.

Cyclotriphosphazene (CP) is a cyclic inorganic compound with the chemical formula (NPCl2)3. This unique molecule consists of a six-membered ring composed of alternating nitrogen and phosphorus atoms, each bonded to two chlorine atoms. CP exhibits remarkable versatility and significance in the realm of materials chemistry due to its easy functionalization via facile nucleophilic substitution reactions in mild conditions as well as intriguing properties of resultant final CP-based molecules or polymers. CP has been served as an important building block for numerous functional materials. This review provides a general and broad overview of the synthesis of CP-based small molecules through nucleophilic substitution of hexachlorocyclotriphosphazene (HCCP), and their applications, including flame retardants, liquid crystals (LC), chemosensors, electronics, biomedical materials, and lubricants, have been summarized and discussed. It would be expected that this review would offer a timely summary of various CP-based materials and hence give an insight into further exploration of CP-based molecules in the future.

Correction: Thermoelectric nanowires for dense 3D printed architectures.

Correction for 'Thermoelectric nanowires for dense 3D printed architectures' by Danwei Zhang et al., Mater. Horiz., 2024, 11, 847-854, https://doi.org/10.1039/D3MH01646C.

Cooperative Sentinel Surveillance of Malaria in Laiza and Nearby Areas of Myanmar and Importation Threat Monitoring - China, 2019-2023.

Introduction: Laiza and nearby areas (LNA) in Myanmar are identified as the primary malaria hotspots in the bordering regions of Yunnan Province, China. Methods: Six sentinel surveillance sites were established at the China-Myanmar border in LNA to monitor malaria. Data from 2019 was used as a baseline to analyze malaria incidence and trends in LNA and Myanmar, as well as the importation of malaria cases into China from 2019 to 2023. Results: Plasmodium vivax was the predominant species, representing 99.95% (14,060/14,066) of confirmed malaria cases in LNA. A total of 8,356 malaria cases were identified in 2023, with an annual parasite incidence (API) of 19.78 per 100 person-years. Compared to 2019, the incidence rate ratio was 21.47 (95% confidence interval: 18.84, 24.48), indicating that the API in 2023 was 21.47 times higher than that in 2019. In Yunnan, out of 1,016 reported cases, 545 imported cases (53.64%) originated from LNA and spread to 18 (13.95%) out of 129 counties. Ten provinces in China, including Yunnan, reported imported malaria cases from LNA in Myanmar. Conclusions: The increase in population, particularly among internally displaced persons, along with inadequate healthcare services, has led to a notable resurgence of malaria in LNA. This resurgence poses a risk to preventing the re-emergence of malaria transmission in China. There is an urgent need for novel collaborative policies, as well as financial and technical assistance, to enhance malaria control efforts in LNA, Myanmar.

Electrofluorochromic Switching of Heat-Induced Cross-Linkable Multi-Styryl-Terminated Triphenylamine and Tetraphenylethylene Derivatives.

High-performance electrochromic (EC) and electrofluorochromic (EFC) materials have garnered considerable interest due to their diverse applications in smart windows, optoelectronics, optical displays, military camouflage, etc. While many different EC and EFC polymers have been reported, their preparation often requires multiple steps, and their polymer molecular weights are subjected to batch variation. In this work, we prepared two triphenylamine (TPA)-based and two tetraphenylethylene (TPE)-based derivatives functionalized with terminal styryl groups via direct Suzuki coupling with (4-vinylphenyl)boronic acid and vinylboronic acid pinacol ester. The two novel TPE derivatives exhibited green-yellow aggregation-induced emission (AIE). The EC and EFC properties of pre- and post-thermally treated derivatives spin-coated onto ITO-glass substrates were studied. While all four derivatives showed modest absorption changes with applied voltages up to +2.4 V, retaining a high degree of optical transparency, they exhibited obvious EFC properties with the quenching of blue to yellow fluorescence with IOFF/ON contrast ratios of up to 7.0. The findings therefore demonstrate an elegant approach to preparing optically transparent, heat-induced, cross-linkable styryl-functionalized EFC systems.

Effect of cold stress on photosynthetic physiological characteristics and molecular mechanism analysis in cold-resistant cotton (ZM36) seedlings.

Low temperature and cold damage seriously hinder the growth, development, and morphogenesis of cotton seedlings. However, the response mechanism of cotton seedlings under cold stress still lacks research. In this study, transcriptome sequencing, gas exchange parameters, and rapid chlorophyll fluorescence parameters were analyzed in leaves of cold-tolerant upland cotton variety "ZM36" under different temperature stress [25°C (T25, CK), 15°C (T15), 10°C (T10), and 4°C (T4)]. The results showed that the net photosynthetic rate (Pn), stomatal conductance (Gs), transpiration rate (Tr), PSII potential maximum photochemical efficiency (Fv/Fm), and performance index (PIabs) of cotton leaves significantly decreased, and the intercellular CO2 concentration (Ci) and Fo/Fm significantly increased under cold stress. The transcriptome sequencing analysis showed that a total of 13,183 DEGs were involved in the response of cotton seedlings at each temperature point (T25, T15, T10, and T4), mainly involving five metabolic pathways-the phosphatidylinositol signaling system, photosynthesis, photosynthesis antenna protein, carbon fixation in photosynthetic organisms, and carotenoid synthesis. The 1,119 transcription factors were discovered among all the DEGs. These transcription factors involve 59 families, of which 15.8% of genes in the NAC family are upregulated. Through network regulatory analysis, the five candidate genes GhUVR8 (GH_A05G3668), GhPLATZ (GH_A09G2161), GhFAD4-1 (GH_A01G0758), GhNFYA1 (GH_A02G1336), and GhFAD4-2 (GH_D01G0766) were identified in response to cold stress. Furthermore, suppressing the expression level of GhPLATZ by virus-induced gene silencing led to the reduction of low temperature resistance, implying GhPLATZ as a positive regulator of low temperature tolerance. The findings of the study revealed a piece of the complex response mechanism of the cold-tolerant variety "ZM36" to different cold stresses and excavated key candidate genes for low temperature response, which provided support for accelerating the selection and breeding of cotton varieties with low temperature tolerance.

Discovery of Novel Small-Molecule-Based Potential PD-L1/EGFR Dual Inhibitors with High Druggability for Glioblastoma Immunotherapy.

Based on the close relationship between programmed death protein ligand 1 (PD-L1) and epidermal growth factor receptor (EGFR) in glioblastoma (GBM), we designed and synthesized a series of small molecules as potential dual inhibitors of EGFR and PD-L1. Among them, compound EP26 exhibited the highest inhibitory activity against EGFR (IC50 = 37.5 nM) and PD-1/PD-L1 interaction (IC50 = 1.77 µM). In addition, EP26 displayed superior in vitro antiproliferative activities and in vitro immunomodulatory effects by promoting U87MG cell death in a U87MG/Jurkat cell coculture model. Furthermore, EP26 possessed favorable pharmacokinetic properties (F = 22%) and inhibited tumor growth (TGI = 92.0%) in a GBM mouse model more effectively than Gefitinib (77.2%) and NP19 (82.8%). Moreover, EP26 increased CD4+ cells and CD8+ cells in tumor microenvironment. Collectively, these results suggest that EP26 represents the first small-molecule-based PD-L1/EGFR dual inhibitor deserving further investigation as an immunomodulating agent for cancer treatment.

Strategies to Enhance the Electrochromic Properties of Conjugated Polymers Bearing Pyromellitic Diimide Acceptors.

A series of conjugated polymers bearing thiophene-based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin-film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange-red-to-green colour switching. On this basis, two more random co-polymers containing higher donor-to-acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI-to-thiophene ratio of ca. 1 : 7 and 1 : 8, revealed orange red-to-blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra-red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC-active conjugated polymers, and considerations for future tuning of colour and switching performances.

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future.

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

Synergistic Combination of Sb2Si2Te6 Additives for Enhanced Average ZT and Single-Leg Device Efficiency of Bi0.4Sb1.6Te3-based Composites.

Thermoelectric materials are highly promising for waste heat harvesting. Although thermoelectric materials research has expanded over the years, bismuth telluride-based alloys are still the best for near-room-temperature applications. In this work, a ≈38% enhancement of the average ZT (300-473 K) to 1.21 is achieved by mixing Bi0.4Sb1.6Te3 with an emerging thermoelectric material Sb2Si2Te6, which is significantly higher than that of most BiySb2-yTe3-based composites. This enhancement is facilitated by the unique interface region between the Bi0.4Sb1.6Te3 matrix and Sb2Si2Te6-based precipitates with an orderly atomic arrangement, which promotes the transport of charge carriers with minimal scattering, overcoming a common factor that is limiting ZT enhancement in such composites. At the same time, high-density dislocations in the same region can effectively scatter the phonons, decoupling the electron-phonon transport. This results in a ≈56% enhancement of the thermoelectric quality factor at 373 K, from 0.41 for the pristine sample to 0.64 for the composite sample. A single-leg device is fabricated with a high efficiency of 5.4% at ΔT = 164 K further demonstrating the efficacy of the Sb2Si2Te6 compositing strategy and the importance of the precipitate-matrix interface microstructure in improving the performance of materials for relatively low-temperature applications.

Multi-step validation of a deep learning-based system with visual explanations for optical diagnosis of polyps with advanced features.

Artificial intelligence (AI) has been found to assist in optical differentiation of hyperplastic and adenomatous colorectal polyps. We investigated whether AI can improve the accuracy of endoscopists' optical diagnosis of polyps with advanced features. We introduced our AI system distinguishing polyps with advanced features with more than 0.870 of accuracy in the internal and external validation datasets. All 19 endoscopists with different levels showed significantly lower diagnostic accuracy (0.410-0.580) than the AI. Prospective randomized controlled study involving 120 endoscopists into optical diagnosis of polyps with advanced features with or without AI demonstration identified that AI improved endoscopists' proportion of polyps with advanced features correctly sent for histological examination (0.960 versus 0.840, p < 0.001), and the proportion of polyps without advanced features resected and discarded (0.490 versus 0.380, p = 0.007). We thus developed an AI technique that significantly increases the accuracy of colorectal polyps with advanced features.

Stable n-Type Perylene Derivative Ladder Polymer with Antiambipolarity for Electrically Reconfigurable Organic Logic Gates.

Organic electrochemical transistors (OECTs) are one of the promising building blocks to realize next-generation bioelectronics. To date, however, the performance and signal processing capabilities of these devices remain limited by their stability and speed. Herein, the authors demonstrate stable and fast n-type organic electrochemical transistors based on a side-chain-free ladder polymer, poly(benzimidazoanthradiisoquinolinedione). The device demonstrated fast normalized transient speed of 0.56 ± 0.17 ms um-2 and excellent long-term stability in aqueous electrolytes, with no significant drop in its doping current after 50 000 successive doping/dedoping cycles and 2-month storage at ambient conditions. These unique characteristics make this polymer especially suitable for bioelectronics, such as being used as a pull-down channel in a complementary inverter for long-term stable detection of electrophysiological signals. Moreover, the developed device shows a reversible anti-ambipolar behavior, enabling reconfigurable electronics to be realized using a single material. These results go beyond the conventional OECT and demonstrate the potential of OECTs to exhibit dynamically configurable functionalities for next-generation reconfigurable electronics.

Bioinspired Solar-Driven Osmosis for Stable High Flux Desalination.

The growing global water crisis necessitates sustainable desalination solutions. Conventional desalination technologies predominantly confront environmental issues such as high emissions from fossil-fuel-driven processes and challenges in managing brine disposal during the operational stages, emphasizing the need for renewable and environmentally friendly alternatives. This study introduces and assesses a bioinspired, solar-driven osmosis desalination device emulating the natural processes of mangroves with effective contaminant rejection and notable productivity. The bioinspired solar-driven osmosis (BISO) device, integrating osmosis membranes, microporous absorbent paper, and nanoporous ceramic membranes, was evaluated under different conditions. We conducted experiments in both controlled and outdoor settings, simulating seawater with a 3.5 wt % NaCl solution. With a water yield of 1.51 kg m-2 h-1 under standard solar conditions (one sun), the BISO system maintained excellent salt removal and accumulation resistance after up to 8 h of experiments and demonstrated great cavitation resistance even at 58.14 °C. The outdoor test recorded a peak rate of 1.22 kg m-2 h-1 and collected 16.5 mL in 8 h, showing its practical application potential. These results highlight the BISO device's capability to address water scarcity using a sustainable approach, combining bioinspired design with solar power, presenting a viable pathway in renewable-energy-driven desalination technology.