Scale-up of microalgal systems for decarbonization and bioproducts: Challenges and opportunities.

The threat of global climate change presents a significant challenge for humanity. Microalgae-based carbon capture and utilization (CCU) technology has emerged as a promising solution to this global issue. This review aims to comprehensively evaluate the current advancements in scale-up of microalgae cultivation and its applications, specifically focusing on decarbonization from flue gases, organic wastewater remediation, and biogas upgrading. The study identifies critical challenges that need to be addressed during the scale-up process and evaluates the economic viability of microalgal CCU within the carbon market. Additionally, it analyzes the commercial status of microalgae-derived products and highlights those with high market demand. This review serves as a crucial resource for researchers, industry professionals, and policymakers to develop and implement innovative approaches to enhance the efficiency of microalgae-based CO2 utilization while addressing the challenges associated with the scale-up of microalgae technologies.

Concurrent enhancement of biomass production and phycocyanin content in salt-stressed Arthrospira platensis: A glycine betaine- supplementation approach.

In industrial-scale cultivation of microalgae, salinity stress often stimulates high-value metabolites production but decreases biomass yield. In this research, we present an extraordinary response of Arthrospira platensis to salinity stress. Specifically, we observed a significant increase in both biomass production (2.58 g L-1) and phycocyanin (PC) content (22.31%), which were enhanced by 1.26-fold and 2.62-fold, respectively, compared to the control, upon exposure to exogenous glycine betaine (GB). The biochemical analysis reveals a significant enhancement in carbonic anhydrase activity and chlorophyll a level, concurrent with reductions in carbohydrate content and reactive oxygen species (ROS) levels. Further, transcriptomic profiling indicates a downregulation of genes associated with the tricarboxylic acid (TCA) cycle and an upregulation of genes linked to nitrogen assimilation, hinting at a rebalanced carbon/nitrogen metabolism favoring PC accumulation. This work thus presents a promising strategy for simultaneous enhancement of biomass production and PC content in A. platensis and expands our understanding of PC biosynthesis and salinity stress responses in A. platensis.

Insight into the mechanism of nitrogen sufficiency conversion strategy for microalgae-based ammonium-rich wastewater treatment.

The strategy of nitrogen sufficiency conversion can improve ammonium nitrogen (NH4+-N) removal with microalgal cells from ammonium-rich wastewater. We selected and identified one promising isolated algal strain, NCU-7, Chlorella sorokiniana, which showed a high algal yield and tolerance to ammonium in wastewater, as well as strong adaptability to N deprivation. The transition from N deprivation through mixotrophy (DN, M) to N sufficiency through autotrophy (SN, P) achieved the highest algal yields (optical density = 1.18 and 1.59) and NH4+-N removal rates (2.5 and 4.2 mg L-1 d-1) from synthetic wastewaters at two NH4+-N concentrations (160 and 320 mg L-1, respectively). Algal cells in DN, M culture obtained the lowest protein content (20.6%) but the highest lipid content (34.0%) among all cultures at the end of the stage 2. After transferring to stage 3, the lowest protein content gradually recovered to almost the same level as SN, P culture on the final day. Transmission electron microscopy and proteomics analysis demonstrated that algal cells had reduced intracellular protein content but accumulated lipids under N deprivation by regulating the reduction in synthesis of protein, carbohydrate, and chloroplast, while enhancing lipid synthesis. After transferring to N sufficiency, algal cells accelerated their growth by recovering protein synthesis, leading to excessive uptake of NH4+-N from wastewater. This study provides specific insights into a nitrogen sufficiency conversion strategy to enhance algal growth and NH4+-N removal/uptake during microalgae-based ammonium-rich wastewater treatment.

Improving algal growth in an anaerobic digestion piggery effluent by fungal pretreatment: Process optimization, the underlying mechanism of fungal decolorization, and nitrogen removal.

Anaerobic digestion piggery effluent (ADPE) shows high chromaticity and ammonium levels, severely inhibiting algal growth. Fungal pretreatment has great potential for decolorization and nutrient removal from wastewater, which coupled with microalgal cultivation may be a reliable strategy for sustainable ADPE resource utilization. In this study, we selected and identified two locally isolated eco-friendly fungal strains for ADPE pretreatment, and fungal culture conditions were optimized for decolorization and ammonium nitrogen (NH4+-N) removal. Subsequently, the underlying mechanisms of fungal decolorization and nitrogen removal were investigated, and the feasibility of using pretreated ADPE for algal cultivation was explored. The results showed that two fungal strains were identified as Trichoderma harzianum and Trichoderma afroharzianum, respectively, presenting good growth and decolorization performance for ADPE pretreatment. The optimized culture conditions were as follows: 20% ADPE, 8 g L-1 glucose, initial pH 6, 160 rpm, 25-30 °C, and 0.15 g L-1 initial dry-weight. ADPE decolorization was mainly caused by fungal biodegradation of color-related humic substances through manganese peroxidase secretion. The removed nitrogen was completely converted into fungal biomass as nitrogen assimilated, ca. 90% of which was attributed to NH4+-N removal. The pretreated ADPE significantly improved algal growth and nutrient removal, demonstrating the feasibility of developing an eco-friendly fungi-based pretreatment technology.

Recent advances in CO2 fixation by microalgae and its potential contribution to carbon neutrality.

Many countries and regions have set their schedules to achieve the carbon neutrality between 2030 and 2070. Microalgae are capable of efficiently fixing CO2 and simultaneously producing biomass for multiple applications, which is considered one of the most promising pathways for carbon capture and utilization. This work reviews the current research on microalgae CO2 fixation technologies and the challenges faced by the related industries and government agencies. The technoeconomic analysis indicates that cultivation is the major cost factor. Use of waste resources such as wastewater and flue gas can significantly reduce the costs and carbon footprints. The life cycle assessment has identified fossil-based electricity use as the major contributor to the global warming potential of microalgae-based CO2 fixation approach. Substantial efforts and investments are needed to identify and bridge the gaps among the microalgae strain development, cultivation conditions and systems, and use of renewable resources and energy.

Multi-factorial analysis of the removal of dichloromethane and toluene in an airlift packing bioreactor.

Biotechnology has proven effective in removing a wide variety of VOCs. In this study, the effects of pH (from 3 to 7), operating temperature (20-30 °C), empty bed residence time (EBRT, 10-40 s) and transient inlet concentration (400-4000 mg m-3) on the removal performance of an airlift packing bioreactor (ALPR) was investigated. The removal efficiency (RE) and stability of the ALPR was evaluated and compared with the conventional airlift bioreactor (ALR). The results showed that under the influence of single factor variation, the ALPR showed significant higher RE and better stability than the ALR in removing dichloromethane (DCM) and toluene. Besides, a factorial design was used to analyses the interaction of multiple factors and their influence on the removal of DCM and toluene in the ALPR and ALR. It shows that pH value has the most significant influence, and plays a crucial role in maintaining high RE of DCM and toluene in both of the ALPR and ALR. Temperature has a great effect on the removal of toluene. EBRT has certain effect on the removal of DCM in the ALPR. The transient concentration of a single substrate has a significant negative effect on the RE of this substrate, while it does not significantly affect the removal of another substrate in the ALPR. However, the steep increase of DCM concentration has an adverse effect on the RE of high concentration toluene in the ALR. The overall RE and degradation capacity of both toluene and DCM by the ALPR are much higher than that of the conventional ALR.

Evaluation on the removal performance of dichloromethane and toluene from waste gases using an airlift packing reactor.

Biological removal of dichloromethane (DCM) from pharmaceutical industry is limited by its recalcitrance. In this study, an airlift packing reactor (ALPR), which combined the suspended and fixed-film microbial growth system, was set up to remove DCM and co-existed toluene. The removal performance of the ALPR for DCM was greater than traditional airlift reactor (ALR). The maximum elimination capacity (ECmax) of the ALPR for DCM reached 108 g m-3 h-1 with removal efficiency (RE) of 41%, increased by 145% if compared to the ALR. The ECmax for toluene was 172 g m-3 h-1 with RE of 70%, decreased by 25% if compared to the ALR, which was mainly due to the higher liquid-phase biomass in the ALR. The results of high-throughput sequencing showed that the microbial composition on the packings of the ALPR had a large difference from its liquid-phase or the liquid-phase of the ALR. Gemmobacter, Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata were genera with great abundance fixed on the packings and Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata are first to be reported in VOCs biological removal. This study indicated that the ALPR can augment the microbial community and effectively improve the removal of recalcitrant VOCs.

o-Xylene removal using one- and two-phase partitioning biotrickling filters: steady/transient-state performance and microbial community.

In this study, one- and two-phase partitioning biotrickling filters (1P-BTF and 2P-BTF, respectively) inoculated with a pre-acclimated mixed culture were examined for the removal of hydrophobic and refractory o-xylene. A small fraction of silicone oil (5% v/v) was added as a non-aqueous phase. Due to the presence of silicone oil, the 2P-BTF exhibited superior performance and stability for o-xylene biodegradation at steady and transient operations. Higher macro-kinetic constants for o-xylene removal by the Michaelis-Menten model were obtained for the 2P-BTF with a saturation constant of 0.396 g m-3 and a maximum elimination capacity of 105.7 g m-3 h-1. The enhancement of removal performance for the 2P-BTF was supported by dominant specialized microorganisms with o-xylene biodegradability. The diversity of microbial community was influenced by the presence of silicone oil. This study demonstrated that a BTF with 5% of silicone oil could be applied for the treatment of hydrophobic and refractory volatile organic compounds. It also provided valuable information for better understanding the relationship between microbial community and removal performance using two-phase partitioning bioreactors.

Microbial compositions and metabolic interactions in one- and two-phase partitioning airlift bioreactors treating a complex VOC mixture.

Engineered microbial ecosystems in bioscrubbers for the treatment of volatile organic compounds (VOCs) have been complicated by complex VOC mixtures from various industrial emissions. Microbial associations with VOC removal performance of the bioscrubbers are still not definitive. Here, one- and two-phase partitioning airlift bioreactors were used for the treatment of a complex VOC mixture. Microbial characteristics in both bioreactors were uncovered by high-throughput metagenomics sequencing. Results showed that dominant species with specialized VOC biodegradability were mainly responsible for high removal efficiency of relative individual VOC. Competitive enzyme inhibitions among the VOC mixture were closely related to the deterioration of removal performance for individual VOC. Relative to the mass transfer resistance, the specialized biodegrading functions of microbial inoculations and enzymatic interactions among individual VOC biodegradation also must be carefully evaluated to optimize the treatment of complex VOC mixtures in bioreactors.

Cholesterol gallstones and bile host diverse bacterial communities with potential to promote the formation of gallstones.

The prevalence of cholesterol gallstones has increased in recent years. Bacterial infection correlates with the formation of gallstones. We studied the composition and function of bacterial communities in cholesterol gallstones and bile from 22 cholesterol gallstone patients using culture-dependent and culture-independent methods. Altogether fourteen and eight bacterial genera were detected in cholesterol gallstones and bile, respectively. Pseudomonas spp. were the dominant bacteria in both cholesterol gallstones and bile. As judged by diversity indices, hierarchical clustering and principal component analysis, the bacterial communities in gallstones were different from those in bile. The gallstone microbiome was considered more stable than that of bile. The different microbial communities may be partially explained by differences in their habitats. We found that 30% of the culturable strains from cholesterol gallstones secreted ß-glucuronidase and phospholipase A2. Pseudomonas aeruginosa strains showed the highest ß-glucuronidase activity and produced the highest concentration of phospholipase A2, indicating that Ps. aeruginosa may be a major agent in the formation of cholesterol gallstones.