Polymer-derived SiOC reinforced with core-shell nanophase structure of ZrB2/ZrO2 for excellent and stable high-temperature microwave absorption (up to 900 °C).

Microwave absorbing materials for high-temperature harsh environments are highly desirable for aerodynamically heated parts and engine combustion induced hot spots of aircrafts. This study reports ceramic composites with excellent and stable high-temperature microwave absorption in air, which are made of polymer-derived SiOC reinforced with core-shell nanophase structure of ZrB2/ZrO2. The fabricated ceramic composites have a crystallized t-ZrO2 interface between ZrB2 and SiOC domains. The ceramic composites exhibit stable dielectric properties, which are relatively insensitive to temperature change from room temperature to 900 °C. The return loss exceeds - 10 dB, especially between 28 and 40 GHz, at the elevated temperatures. The stable high-temperature electromagnetic (EM) absorption properties are attributed to the stable dielectric and electrical properties induced by the core-shell nanophase structure of ZrB2/ZrO2. Crystallized t-ZrO2 serve as nanoscale dielectric interfaces between ZrB2 and SiOC, which are favorable for EM wave introduction for enhancing polarization loss and absorption. Existence of t-ZrO2 interface also changes the temperature-dependent DC conductivity of ZrB2/SiOC ceramic composites when compared to that of ZrB2 and SiOC alone. Experimental results from thermomechanical, jet flow, thermal shock, and water vapor tests demonstrate that the developed ceramic composites have high stability in harsh environments, and can be used as high-temperature wide-band microwave absorbing structural materials.

Highly electromagnetic transparent ceramic composite made of boron nitride nanotubes and silicon oxynitride via perhydropolysilazane infiltration method.

With the rapid development of electromagnetic (EM) wave circuit devices, high-performance wave-transparent materials with various functions have attracted great attention. Ceramic material is a promising candidate to be applied in harsh environments because of its chemical and corrosion resistance. In this work, a polymer-derived route was adopted to synthesize ceramic composite at room temperature. The composite is made of perhydropolysilazane-derived SiON ceramic and reinforced with boron nitride nanotubes (BNNTs) sheets. With the addition of SiON ceramic materials, the resultant sample showed an excellent hydrophobicity with a contact angle of 135-146.9°. More importantly, superior thermal stability at 1600 °C in the oxygen-containing atmosphere was observed for the fabricated SiON/BNNTs sample, without any shape change. The electromagnetic transparency of the SiON/BNNTs was studied through the waveguide method. The prepared SiON/BNNTs sample has an average real permittivity between 1.52 and 1.55 and an average loss tangent value in the range of 0.0074-0.0266, at the frequency range of 26.5-40 GHz. The effect of thickness on the wave transparency of SiON/BNNTs samples is also discussed. To summarize the aforementioned superior characterization and measurement results, the presented SiON/BNNTs material system has a great potential to be used as EM transparent materials in harsh conditions.

Temperature and Pressure Wireless Ceramic Sensor (Distance = 0.5 Meter) for Extreme Environment Applications.

This paper presents a design for temperature and pressure wireless sensors made of polymer-derived ceramics for extreme environment applications. The wireless sensors were designed and fabricated with conductive carbon paste on an 18.24 mm diameter with 2.4 mm thickness polymer-derived ceramic silicon carbon nitride (PDC-SiCN) disk substrate for the temperature sensor and an 18 × 18 × 2.6 mm silicon carbide ceramic substrate for the pressure sensor. In the experiment, a horn antenna interrogated the patch antenna sensor on a standard muffle furnace and a Shimadzu AGS-J universal test machine (UTM) at a wireless sensing distance of 0.5 m. The monotonic relationship between the dielectric constant of the ceramic substrate and ambient temperature is the fundamental principle for wireless temperature sensing. The temperature measurement has been demonstrated from 600 °C to 900 °C. The result closely matches the thermocouple measurement with a mean absolute difference of 2.63 °C. For the pressure sensor, the patch antenna was designed to resonate at 4.7 GHz at the no-loading case. The sensing mechanism is based on the piezo-dielectric property of the silicon carbon nitride. The developed temperature/pressure sensing system provides a feasible solution for wireless measurement for extreme environment applications.

Preparation of acrylamide/acrylic acid cellulose hydrogels for the adsorption of heavy metal ions.

Modified cellulose hydrogels were prepared by blending and cross-linking with acrylamide and acrylic acid. The structure of hydrogels was characterized and analyzed with fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Under the optimized conditions, the maximum absorption capacity in modified cellulose hydrogels of Cu (II), Pb (II) and Cd (II) ions were 157.51, 393.28 and 289.97 mg/g, respectively. In addition, the metal ion adsorption process accorded with pseudo-second-order rate equation and Langmuir adsorption isotherm. Based on the microstructure analysis and adsorption kinetics, the adsorption mechanisms such as physical, chemical, and electrostatic interactions are discussed. The adsorption process was controlled by the ion-exchange mechanism.