East Asia Superciliary Arch Augmentation With Silicone Implant.

OBJECTIVE: A flat superciliary arch is relatively common in East Asian women. Superciliary arch augmentation aims to increase the facial three-dimensionality of the upper face. However, there are few reports in the literature specifically introducing the surgery. In this study, the authors present the clinical outcomes after a series of superciliary arch augmentation with silicone implants. METHODS: From May 2020 to December 2022, 54 patients underwent superciliary arch augmentation with silicone implants. Silicone implants generally have a length of 50 to 60 mm, a width of 13 to 14 mm, and an arc of 170 degrees. The thickness was 2 to 7 mm. The implant was placed subperiosteal at the lower edges of the eyebrows through a 7 mm incision below the brow tail. All patients evaluated the outcome according to the Global Esthetic Improvement Scale. Four plastic surgeons evaluated postsurgery results with a 5-point Likert Scale (5 = excellent, 4 = good, 3 = fair, 2 = no change, and 1 = worse). RESULTS: Fifty-four patients were successfully enrolled. The mean follow-up period was 12.02 ± 3.38 months. The mean thickness was 4.55 ± 0.67 mm for the thickest part of the implant. The minor complication rate was 44.44%. They all subsided within 1 month without treatment. Patients' outcome ratings were 4.45 ± 0.55 (3 mo), 4.51 ± 0.48 (6 mo), and 4.51 ± 0.45 (1 y). The surgeons' outcome scoring was 4.49 ± 0.31. CONCLUSIONS: Superciliary arch augmentation with silicone implants is a quite simple, effective, inexpensive, and safe strategy to improve the three-dimensionality and contour of the upper face in East Asians.

The Spatial Relationship Between Coronoid Process and Zygomatic Complex After Reduction Malarplasty.

BACKGROUND: Reduction malarplasty presents challenges in terms of postoperative complications, particularly limited mouth opening. Excessive inward displacement of the zygomatic complex can impinge on the coronoid process resulting in restricted mouth opening. This study aimed to assess the spatial relationship between the coronoid process and the zygomatic complex after reduction malarplasty. METHODS: A retrospective study was conducted, including consecutive patients underwent reduction malarplasty. Radiological measurements were performed before surgery and during the final follow-up, including the coronoid-condylar index, distance between the coronoid process and zygomatic complex, and thickness and density of the temporal and masseter muscles. Clinical and radiographic data were recorded and analyzed. RESULTS: A total of 159 female patients were included with an average age of 28.1 years and a mean follow-up of 6.7 months. The mean coronoid-condylar index was 1:1.4, ranging from 1:0.6 to 1:2.6. Following surgery, the distances between the coronoid process and the anterior zygoma decreased by approximately 1 mm. Additionally, the postoperative distance between the highest point of the coronoid process and the zygomatic arch decreased by around 4 mm horizontally and changed approximately 1 mm vertically. No significant changes were observed in the thickness and density of the temporal and masseter muscles after surgery. CONCLUSIONS: Reduction malarplasty led to a slight decrease in the distance between the coronoid process and the zygoma. The operation generally resulted in proximity between the highest point of the coronoid process and the zygomatic arch. However, we believe that common reduction malarplasty rarely leads to osseous impingement. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

[Model test study on treatment of Pruzansky type â ¡B and â ¢ hemifacial microsomia with artificial condyle-mandibular distractor complex].

Objective: To preliminarily verify the effectiveness of self-designed artificial condyle-mandibular distraction (AC-MD) complex in the treatment of Pruzansky type ⅡB and Ⅲ hemifacial microsomia (HFM) through model test. Methods: Five children with Pruzansky type ⅡB and Ⅲ HFM who were treated with mandibular distraction osteogenesis (MDO) between December 2016 and December 2021 were selected as the subjects. There were 3 boys and 2 girls wih an average age of 8.4 years (range, 6-10 years). Virtual surgery and model test of AC-MD complex were performed according to preoperative skull CT of children. The model was obtained by three-dimensional (3D) printing according to the children's CT data at a ratio of 1∶1. The occlusal guide plate was designed and 3D printed according to the children's toothpaste model. The results of the model test and the virtual surgery were matched in three dimensions to calculate the error of the residual condyle on the affected side, and the model test was matched with the actual skull CT after MDO to measure and compare the inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible. Results: The error of residual condyle was (1.07±0.78) mm. The inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible after 3D printing model test were significantly larger than those after MDO ( P<0.05). Conclusion: In the model test, the implantation of AC-MD complex can immediately rotate the mandible to the horizontal position and improve facial symmetry, and the residual condyle segment can be guided close to the articular fossa or the preset pseudoarticular position of the skull base after operation.

Reconstructive Operation of Severe Orbital Hypertelorism With Computer-Assisted Precise Virtual Plan.

Orbital hypertelorism correction is still a less precise procedure, with a simple preoperative design and surgical results often depending on the operator's experience. In recent years, computer-assisted technology has been fully utilized in craniofacial surgery. This article aims to explore the clinical results of computer-assisted technology in orbital hypertelorism correction and discuss its advantages and effects on treatment. Four patients with orbital hypertelorism underwent intracranial and extracranial combined box osteotomy correction. Preoperative computed tomography scans were performed, and 3-dimensional 3D digital technology was used to measure the orbital spacing, virtually design the 3D cutting scheme, and guide the intraoperative 3D cutting to improve the accuracy of periorbital osteotomy and reduce the surgical risk. Four patients underwent successful surgery, and the average distance of the medial orbital wall was decreased from 43.6 to 23.4 mm. Computer-assisted box osteotomy shortens the operative time and provides better corrective results.

Stab access fascia suspension lift: A facelift technique without skin excision and visible scar.

BACKGROUND: Traditional middle and lower facelifts are not suitable for patients with mild skin laxity or who wish to avoid incision scars. OBJECTIVE: We present the stab access fascia suspension lift (SAFS-lift) technique, which does not require regular skin incisions, as a reliable surgical facelift strategy for the lower and middle face. METHODS: From September 2020 to September 2021, 38 patients underwent SAFS-lift. SAFS-lift involved (1) incomplete subcutaneous undermining with hydrodissection-assisted tunneling; (2) complete subcutaneous undermining with a dissecting cannula in the zygomatic buccal groove area and hollow below zygomatic arch; and (3) maximal firm superficial musculoaponeurotic system suspension with polydioxanone barbed threads in loops. All patients evaluated the outcome according to the Global Aesthetic Improvement Scale. Four plastic surgeons evaluated postsurgery result with a five-point Likert scale (5 = excellent, 4 = good, 3 = fair, 2 = no change, and 1 = worse). RESULTS: Thirty-six patients were successfully enrolled. The mean follow-up period was 14.72 ± 3.89 months. No patients showed visible scarring 6 months after surgery. The minor complication rate was 19.4%. They all subsided within 1-6 weeks without treatment. No infection, hematoma, seroma, or facial nerve injury was observed. Patients' outcome ratings were 4.22 ± 0.58 (3 months), 4.69 ± 0.46 (6 months), and 4.69 ± 0.54 (1 year). Surgeons' outcome scoring was 3.98 ± 0.95. CONCLUSIONS: Stab access fascia suspension-lift is a predictable, effective, and safe facelift technique that can be performed without making noticeable incisions and resecting the skin.

Biomechanical Evaluation of Seven Fixation Methods for Sagittal Split Ramus Osteotomy with Four Advancement Levels by Finite Element Analysis.

Background: Mandibular sagittal split ramus osteotomy (SSRO) is a routine surgery to correct mandibular deformities, such as mandibular retrusion, protrusion, deficiency, and asymmetry. However, nonunion/malunion of the fragments and relapse caused by fixation failure after SSRO are major concerns. Rigid fixation to maintain postosteotomy segmental stabilization is critical for success. Additionally, understanding the biomechanical characteristics of different fixation methods in SSRO with large advancements is extremely important for clinical guidance. Therefore, the aim of the present study was to evaluate the biomechanical characteristics of different SSRO methods by finite element analysis. Methods: SSRO finite element models with 5-, 10-, 15-, and 20-mm advancements were developed. Seven fixation methods, namely, two types of bicortical screws, single miniplate, dual miniplates, grid plate, dual L-shaped plates, and hybrid fixation, were positioned into the SSRO models. Molar and incisal biomechanical loads were applied to all models to simulate bite forces. We then investigated the immediate postoperative stability from four aspects, namely, the stability of the distal osteotomy segment, osteotomy regional stability, stress distribution on the mandible, and implant stress performance. Results: The stability of the distal osteotomy segment and osteotomy region decreased when the advancement increased. All seven fixation methods displayed favorable biomechanical stability under minor advancement (5 mm). With large advancements, bicortical screws, dual miniplates, and grid plates provided better stability. The von Mises stress was concentrated around the screws close to the osteotomy region for the proximal segment for all fixation methods, and the von Mises stress on implants increased with larger advancements. With small advancements, five fixation methods endured tolerable maximum stresses of <880 MPa. A single miniplate and dual L-shaped plates generally suffered high stresses using larger advancements. The biomechanical characteristics were similar under molar and incisal loads. Conclusions: The current study investigated the biomechanical properties of seven fixation devices after SSRO under molar and incisal loads. Generally, bicortical screws, grid plates, and dual miniplates provided better biomechanical stability using finite element analysis.

What is the impact of distraction osteogenesis on the upper airway of hemifacial microsomia patient with obstructive sleep apnea: a case report.

BACKGROUND: Current research about hemifacial microsomia (HFM) patients after distraction osteogenesis (DO) most emphasize the morphologic changes. This case report shows the outcome of DO on the upper airway of a HFM patient with obstructive sleep apnea (OSA) based on the use of computational fluid dynamics (CFD). CASE PRESENTATION: An 11-year-old boy was diagnosed as HFM with OSA, and underwent unilateral DO. Polysomnography and CT scans were performed before and 6 months after treatment. After DO, lowest blood oxygen saturation increased from 81% to 95% and apnea and hypopnea index decreased from 6.4 events/hour to 1.2 events/hour. The oropharynx and nasopharynx were obviously expanded. We observed apparently increased average pressure, decreased average velocity and pressure drop in all cross-sections, and largely decreased airflow resistance and maximum velocity entirely in the airway. CONCLUSIONS: The results suggest that DO might be effective for the treatment of OSA by expanding the upper airway and reducing the resistance of inspiration.

Virtual Reality and Three-Dimensional Printed Models Improve the Morphological Understanding in Learning Mandibular Sagittal Split Ramus Osteotomy: A Randomized Controlled Study.

Background: The mandibular sagittal split ramus osteotomy (SSRO) is a routine operation performed to correct mandibular deformity including mandibular retrusion, protrusion, deficiency, and asymmetry. The SSRO remains a challenging procedure for junior surgeons due to a lack of adequate morphological knowledge necessary for success in clinical practice. Virtual reality (VR) and three-dimensional printed (3DP) models have been widely applied in anatomy education. The present randomized, controlled study was performed to evaluate the effect of traditional educational instruments, VR models, and 3DP models on junior surgeons learning the morphological information required to perform SSRO. Methods: Eighty-one participants were randomly assigned to three learning groups: Control, VR, and 3DP. Objective and subjective tests were used to evaluate the learning effectiveness of each learning instrument. In the objective test, participants were asked to identify 10 anatomical landmarks on normal and deformed models, draw the osteotomy line, and determine the description of SSRO. In the subjective test, participants were asked to provide feedback regarding their subjective feelings about the learning instrument used in their group. Results: The objective test results showed that the VR and 3DP groups achieved better accuracy in drawing the osteotomy line (p = 0.027) and determining the description of SSRO (p = 0.023) than the Control group. However, there was no significant difference among the three groups regarding the identification of anatomical landmarks. The VR and 3DP groups gave satisfactory subjective feedback about the usefulness in learning, good presentation, and enjoyment. The Control and 3DP groups reported positive feelings about ease of use. Conclusion: The current findings suggest that VR and 3DP models were effective instruments that assisted in the morphological understanding of SSRO-related anatomical structures. Furthermore, 3DP models may be a promising supplementary instrument to bridge the gap between conventional learning and clinical practice.

Repairing Cranial Defect With Autogenous Mandibular Outer Plate.

BACKGROUND: Autogenous bone is the best material in cranioplasty because of biological advantages. Previously, skull, rib, ilium, and fibula have been used in the reconstruction of cranial defects. However, the application of autologous mandibular outer plate in the treatment of skull defect is rarely reported. This study evaluated the application of the autogenous mandibular outer plate in the reconstruction of cranial defect. METHODS: Eleven patients who underwent cranioplasty with mandibular outer plate were recruited. Three-dimensional tomography data were collected to calculate the preoperative, immediate postoperative, and long-term follow-up volume of the bone graft area and donor bone site, and then the absorption rate and the regeneration rate of autogenous bone were analyzed. RESULTS: The majority of the patients were satisfied with the reconstructive outcome. There are statistical differences in the volumetric measurements of the bone graft area and bone donor site at different time periods (P<0.05). The mean absorptivity of mandibular outer plate implanted in the cranial defect area was (17.30 ±â€Š5.03)% after 3 to 24 months postoperatively, the average regeneration rate of mandibular outer plate volume was (41.65 ±â€Š9.85)% at the same period. CONCLUSION: This report shows that the cranioplasty with mandibular outer plate bone graft may be an optional surgical procedure.

Assessment of a Novel Standardized Training System for Mandibular Contour Surgeries.

IMPORTANCE: Mandibular contour surgeries (MCS) involving reduction gonioplasty and genioplasty are rewarding for patients with square faces; however, the procedure has inherently difficult clinician learning curves and unpredictable skill acquisitions. To our knowledge, there has been no effective, validated training model that might improve training and surgical outcomes for MCS. OBJECTIVE: To establish and evaluate a standardized intraoral MCS training system. DESIGN, SETTING, AND PARTICIPANTS: Intraoral MCS training models were constructed by 3-dimensional (3D) skull models covered with elastic head cloths. From April 2016 to April 2018, 90 consecutive MCS patients (30 per group) and 15 craniofacial surgery fellow physicians (5 per group) were enrolled in the prospective observational study. They were randomly divided into intervention groups (A and B) and a control group (C). Intervention groups A and B completed 5 training sessions on the intraoral MCS training models before each clinical case. Group A performed both the model training sessions and clinical surgeries with surgical templates. Control group C had no extra training before clinical surgeries. All groups completed clinical surgery under supervision on 6 patients. The duration of follow-up was at least 3 months postoperatively. INTERVENTIONS: Intraoral MCS training models were provided to intervention groups (A and B) before clinical surgeries. Surgical templates were provided to intervention group A both in training sessions and clinical surgeries. MAIN OUTCOMES AND MEASURES: The completion time, surgical accuracy, learning curves, operating confidence, surgical skill, and outcome satisfaction of each procedure were recorded and analyzed with paired t test and 1-way analysis of variance test by blinded observers. RESULTS: All 90 patients (14 men, 76 women; mean [SD] age, 26 [5] years) were satisfied with their postoperative mandible contours. The intervention groups (A and B), especially the group with surgical templates (A) showed improvements in clinical surgery time (mean [SD], group A 147.2 [24.71] min; group B, 184.47 [16.28] min; group C, 219.3 [35.3] min; P = .001), surgical accuracy (mean [SD], group A, 0.68 [0.22] mm; group B, 1.22 [0.38] mm; group C, 1.88 [0.54] mm; P < .001), learning curves, and operators' confidence and surgical skill. CONCLUSIONS AND RELEVANCE: The intraoral MCS training model was effective and practical. The optimal intraoral MCS training system included intraoral MCS training models and surgical templates. The system significantly decreased clinical surgery time, improved surgical accuracy, shortened the learning curve, boosted operators' confidence, and was associated with better acquisition of surgical skills. LEVEL OF EVIDENCE: NA.

An Effective Simulator for Intraoral Facial Skeletal Contour Surgeries.

BACKGROUND: In East Asia, intraoral facial skeletal contour surgeries (intraoral FSCSs), including reduction gonioplasty, reduction malarplasty, and genioplasty, have become increasingly popular. Nonetheless, intraoral FSCSs are technically difficult and have a steep learning curve. An effective simulator could be beneficial for intraoral FSCS training. However, there is no intraoral FSCS simulator available. We introduced an intraoral FSCS simulator and assessed its effectiveness. METHODS: An intraoral FSCS simulator was established by covering a 3-dimensional printed skull with elastic cloth. Twenty residents were enrolled and randomly divided into experimental group A and control group B. Group A performed the intraoral FSCS on the simulator for 3 times. Group B performed the intraoral FSCS on skull model for 3 times. The intraoral FSCS simulator and trainees' performance were evaluated by a trainee-reported questionnaire before and after training, the surgical outcomes were graded by 3 senior attending physicians. All questions and the surgical outcome were scored based on a 5-point Likert scale (1 = very poor, 5 = very good). The surgical times were recorded. RESULTS: The intraoral FSCS simulator (4.13 ± 0.64) simulated the surgical reality significantly better than the skull (2.6 ± 0.63). In intraoral FSCS simulator training, the restriction and compliance of the facial soft tissue were vividly mimicked (4.4 ± 0.51); the intraoral approach was vividly mimicked (4.07 ± 0.59). The intraoral FSCS simulator is significantly superior to the skull in improving participants' confidence in performing intraoral FSCS, power system control, and intraoral approach adoption (<0.001). The average surgical outcome score was 3.11 ± 0.45 in group A and 3.91 ± 0.24 in group B. The average surgical time was 177.78 ± 28.38 minutes in group A and 65.26 ± 15.38 minutes in group B. CONCLUSIONS: We developed the first intraoral FSCS simulator and proved its effectiveness preliminarily. Randomized controlled study with clinical cases is needed to further test its effectiveness.

3D Interconnected V6O13 Nanosheets Grown on Carbonized Textile via a Seed-Assisted Hydrothermal Process as High-Performance Flexible Cathodes for Lithium-Ion Batteries.

Three-dimensional (3D) free-standing nanostructured materials have been proven to be one of the most promising electrodes for energy storage due to their enhanced electrochemical performance. And they are also widely studied for the wearable energy storage systems. In this work, interconnected V6O13 nanosheets were grown on the flexible carbonized textile (c-textile) via a seed-assisted hydrothermal method to form a 3D free-standing electrode for lithium-ion batteries (LIBs). The electrode exhibited a specific capacity of 170 mA h g-1 at a specific current of 300 mA g-1. With carbon nanotube (CNT) coating, its specific capacities further increased 12-40% at the various current rates. It could retain a reversible capacity of 130 mA h g-1, 74% of the initial capacity after 300 cycles at the specific current of 300 mA g-1. It outperformed most of the mixed-valence vanadium oxides. The improved electrochemical performance was ascribed to the synergistic effect of the 3D nanostructure of V6O13 for feasible Li+ diffusion and transport and highly conductive hierarchical conductive network formed by CNT and carbon fiber in c-textile.

Flexible and Hierarchically Structured Sulfur Composite Cathode Based on the Carbonized Textile for High-Performance Li-S Batteries.

Carbon hosts have been utilized to obtain composite cathodes with high sulfur loadings for Li-S batteries. However, the complicated synthesis process may hinder their practical applications. Their mechanical and electrochemical properties shall be further improved. Herein, a facile scalable dip-coating process is developed to synthesize a flexible composite cathode with a high sulfur loading. Via the process, a hybrid composed of carbon nanotubes, carbon black, sulfur, and titania nanoparticles is successfully conformally coated on the carbonized textile (c-textile). The formed flexible c-textile@S/TiO2 cathodes with sulfur loadings of 1.5 and 3.0 mg cm-2 can deliver reversible discharge capacities of 860 and 659 mA h g-1 at 2 C, respectively. For the latter one, it can retain 94% of the initial capacity after 400 cycles with a high Coulombic efficiency (∼96%). When its sulfur loading is further increased to 7.0 mg cm-2, its areal capacity reaches 5.2 mA h cm-2. Such excellent performance is ascribed to the synergy effect of the three-dimension conductive hierarchical pore structure and TiO2 additive. They can physically and chemically entrap the soluble polysulfides in the composite cathode. The as-synthesized free-standing composite electrode is of low cost and a high areal capacity, making it suitable for flexible energy storage applications based on Li-S batteries.

Multiple factors affecting surgical outcomes and patency rates in use of single-armed two-suture microsurgical vasoepididymostomy: a single surgeon's experience with 81 patients.

Vasoepididymostomy (VE), as the most challenging procedure in microsurgeries, is often carried out with a double-armed two-suture technique. In this study, we evaluated the efficacy and safety of the single-armed two-suture VEs on humans and studied the factors that could possibly affect the patency rates. From July 2012 to July 2013, we reviewed 81 patients with consecutive primary epididymal obstruction who underwent single-armed two-suture longitudinal intussusception microsurgical VEs by a single surgeon, Kai Hong (KH). At the same time, we analyzed seven factors that possibly related to the patency rates. With the single-armed technique, a total of 81 men underwent the microsurgical VEs. Data on 62 patients were completely recorded. 19 patients were lost to follow-up. Mean age was 31 years old. Mean follow-up time was 8.8 (2-17) months. The patency rate was 66.1% (41/62). Natural pregnancy rate was 34.1% (14/41). Overall pregnancy rate was 22.6% (14/62). No severe surgical complications were noted. With logistic regression test analysis, there were two factors related to a higher patency rate: anastomosis sites (P = 0.035) and motile sperm found in the epididymal fluid (P = 0.006). Motile sperm found in the epididymal fluid were associated with a higher patency rate (OR = 11.80, 95% CI = 1.79, 77.65). The single-armed two-suture longitudinal VE technique is feasible for microsurgical practice. The patency and pregnancy rates are comparable to the doubled-armed technique. Anastomosis sites and motile sperm found in the epididymal fluid were the most two important factors related to higher patency.