Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Mol Nutr Food Res ; : e2400023, 2024 Jun 24.
Artigo em Inglês | MEDLINE | ID: mdl-38924315

RESUMO

SCOPE: Grifola frondosa has been shown to induce immune modulatory, modulate autophagy, and apoptosis in cancer cells. However, little is known about its potential for managing tumor progression as an adjunct to nutrient restriction. METHODS AND RESULTS: Water extract produces a G. frondosa polysaccharide-protein complex (G. frondosa PPC) of average molecular weight of 46.48 kDa, with glucose (54.8%) as the main constituent. Under serum-restricted conditions, G. frondosa PPC can significantly inhibit MC38 colorectal tumor cell migration in vitro. Under alternate-day fasting condition, G. frondosa PPC can only significantly inhibit the growth of subcutaneous (s.c.) tumor, but is feeble in halting its spread in the intraperitoneal (i.p.) cavity in tumor-bearing mice. Histopathological examination and Raman imaging show a significant increase in lipid content in the tumor microenvironment (TME) tissue of the s.c. tumor-bearing mice. G. frondosa PPC significantly increases C17:0 and C24:0 saturated fatty acids and significantly decreases C16:1 and C18:1 monounsaturated fatty acids in the TME of s.c. tumor-bearing mice compared with the i.p. cavity model. CONCLUSION: G. frondosa PPC significantly inhibits tumor growth in s.c. tumor-bearing mice under intermittent fasting conditions by altering the fatty acid composition of the TME.

2.
Adv Sci (Weinh) ; : e2306890, 2024 May 30.
Artigo em Inglês | MEDLINE | ID: mdl-38816931

RESUMO

In spite of recent advances in the field of undernutrition, current dietary therapy relying on the supply of high protein high calorie formulas is still plagued with transient recovery of impaired organs resulting in significant relapse of cases. This is partly attributed to the inadequacy of current research models in recapitulating clinical undernutrition for mechanistic exploration. Using 1636 Macaca fascicularis monkeys, a human-relevant criterion for determining undernutrition weight-for-age z-score (WAZ), with a cutoff point of ≤ -1.83 is established as the benchmark for identifying undernourished nonhuman primates (U-NHPs). In U-NHPs, pathological anomalies in multi-organs are revealed. In particular, severe dysregulation of hepatic lipid metabolism characterized by impaired fatty acid oxidation due to mitochondria dysfunction, but unlikely peroxisome disorder, is identified as the anchor metabolic aberration in U-NHPs. Mitochondria dysfunction is typified by reduced mito-number, accumulated long-chain fatty acids, and disruption of OXPHOS complexes. Soy peptide-treated U-NHPs increase in WAZ scores, in addition to attenuated mitochondria dysfunction and restored OXPHOS complex levels. Herein, innovative criteria for identifying U-NHPs are developed, and unknown molecular mechanisms of undernutrition are revealed hitherto, and it is further proved that soypeptide supplementation reprogramed mitochondrial function to re-establish lipid metabolism balance and mitigated undernutrition.

3.
J Agric Food Chem ; 72(22): 12529-12540, 2024 Jun 05.
Artigo em Inglês | MEDLINE | ID: mdl-38764367

RESUMO

In this study, edible bird's nest (EBN) was proven to be a suitable source of bioactive peptides via enzymatic hydrolysis. The ultrafiltration component of the EBN peptides (EBNPs, Mw < 3 000 Da) could be responsible for moderate moisture retention and filaggrin synthesis. It was found that EBNP had a great capacity to protect HaCaT keratinocytes from DNA damage caused by UVB-irradiation and enhance wound healing by increasing the migratory and proliferative potential of cells. Furthermore, the external application of EBNP could effectively repair high glycolic acid concentration-induced skin burns in mice. A total of 1 188 peptides, predominantly the hydrophobic amino acids (e.g., Leu, Val, Tyr, Phe), were identified in the EBNP by liquid chromatography with tandem mass spectrometry (LC-MS/MS). Molecular docking showed that hydrophobic tripeptides from EBNP had a good binding affinity to proton-dependent oligopeptide transporter PepT1. Our data indicated that the hydrophobic amino acid-rich EBNP plays an important role in skin wound healing.


Assuntos
Aves , Proteínas Filagrinas , Peptídeos , Hidrolisados de Proteína , Pele , Cicatrização , Animais , Cicatrização/efeitos dos fármacos , Hidrolisados de Proteína/química , Hidrolisados de Proteína/metabolismo , Camundongos , Pele/química , Pele/metabolismo , Humanos , Peptídeos/química , Peptídeos/metabolismo , Aves/metabolismo , Simulação de Acoplamento Molecular , Queratinócitos/metabolismo , Queratinócitos/efeitos dos fármacos , Espectrometria de Massas em Tandem , Masculino , Proteínas Aviárias/química , Proteínas Aviárias/metabolismo , Transporte Biológico , Células HaCaT , Absorção Cutânea
4.
Food Chem ; 401: 134059, 2023 Feb 01.
Artigo em Inglês | MEDLINE | ID: mdl-36095999

RESUMO

Delivering bioactive peptides orally is hampered by poor absorption across the gastrointestinal barrier. Using the walnut-derived peptide PW5, PPKNW, we explored whether coformulation of peptides with absorption enhancer sodium N-[8-(2-hydroxybenzoyl)aminocaprylate] (SNAC) could improve the intestinal absorption of orally-administered bioactive peptides. Herein, the application of SNAC enhanced the absorption efficiency of PW5 in a non-everted gut sac model. Particle size distribution (1 027.8 ± 6.74 nm) and zeta potential (-2.89 ± 0.07 mV) of the PW5-SNAC complex were significantly greater than that of individual PW5 and SNAC. Scanning electron microscopy revealed that SNAC application could aggravate the surface roughness and reduce the compact structure of PW5. It further showed that PW5 and SNAC binds through an endothermic process underpinned by hydrogen bond and van der Waals forces and that SNAC could bound primarily to the internal calyx of PW5. These findings are helpful for the effective delivery of bioactive peptides.


Assuntos
Caprilatos , Sódio , Sódio/farmacologia , Absorção Intestinal , Peptídeos/farmacologia
5.
Sensors (Basel) ; 19(16)2019 Aug 09.
Artigo em Inglês | MEDLINE | ID: mdl-31395810

RESUMO

The paper presents the design and fabrication of a low-cost and easy-to-fabricate laser-induced graphene sensor together with its implementation for multi-sensing applications. Laser-irradiation of commercial polymer film was applied for photo-thermal generation of graphene. The graphene patterned in an interdigitated shape was transferred onto Kapton sticky tape to form the electrodes of a capacitive sensor. The functionality of the sensor was validated by employing them in electrochemical and strain-sensing scenarios. Impedance spectroscopy was applied to investigate the response of the sensor. For the electrochemical sensing, different concentrations of sodium sulfate were prepared, and the fabricated sensor was used to detect the concentration differences. For the strain sensing, the sensor was deployed for monitoring of human joint movements and tactile sensing. The promising sensing results validating the applicability of the fabricated sensor for multiple sensing purposes are presented.

6.
Sensors (Basel) ; 19(13)2019 Jul 01.
Artigo em Inglês | MEDLINE | ID: mdl-31266148

RESUMO

The paper highlights some of the significant works done in the field of medical and biomedical sensing using silicon-based technology. The use of silicon sensors is one of the pivotal and prolonged techniques employed in a range of healthcare, industrial and environmental applications by virtue of its distinct advantages over other counterparts in Microelectromechanical systems (MEMS) technology. Among them, the sensors for biomedical applications are one of the most significant ones, which not only assist in improving the quality of human life but also help in the field of microfabrication by imparting knowledge about how to develop enhanced multifunctional sensing prototypes. The paper emphasises the use of silicon, in different forms, to fabricate electrodes and substrates for the sensors that are to be used for biomedical sensing. The electrical conductivity and the mechanical flexibility of silicon vary to a large extent depending on its use in developing prototypes. The article also explains some of the bottlenecks that need to be dealt with in the current scenario, along with some possible remedies. Finally, a brief market survey is given to estimate a probable increase in the usage of silicon in developing a variety of biomedical prototypes in the upcoming years.


Assuntos
Técnicas Biossensoriais , Nanofios/química , Silício/química , Pesquisa Biomédica/métodos , Eletrodos , Humanos , Microtecnologia
7.
Sensors (Basel) ; 19(7)2019 Apr 10.
Artigo em Inglês | MEDLINE | ID: mdl-30974757

RESUMO

This paper showcases a substantial review on some of the significant work done on 3D printing of sensors for biomedical applications. The importance of 3D printing techniques has bloomed in the sensing world due to their essential advantages of quick fabrication, easy accessibility, processing of varied materials and sustainability. Along with the introduction of the necessity and influence of 3D printing techniques for the fabrication of sensors for different healthcare applications, the paper explains the individual methodologies used to develop sensing prototypes. Six different 3D printing techniques have been explained in the manuscript, followed by drawing a comparison between them in terms of their advantages, disadvantages, materials being processed, resolution, repeatability, accuracy and applications. Finally, a conclusion of the paper is provided with some of the challenges of the current 3D printing techniques about the developed sensing prototypes, their corresponding remedial solutions and a market survey determining the expenditure on 3D printing for biomedical sensing prototypes.


Assuntos
Pesquisa Biomédica/tendências , Técnicas Biossensoriais/tendências , Impressão Tridimensional/tendências , Humanos
8.
Sensors (Basel) ; 19(6)2019 Mar 25.
Artigo em Inglês | MEDLINE | ID: mdl-30934649

RESUMO

This paper provides a substantial review of some of the significant research done on the fabrication and implementation of laser-assisted printed flexible sensors. In recent times, using laser cutting to develop printed flexible sensors has become a popular technique due to advantages such as the low cost of production, easy sample preparation, the ability to process a range of raw materials, and its usability for different functionalities. Different kinds of laser cutters are now available that work on samples very precisely via the available laser parameters. Thus, laser-cutting techniques provide huge scope for the development of prototypes with a varied range of sizes and dimensions. Meanwhile, researchers have been constantly working on the types of materials that can be processed, individually or in conjugation with one another, to form samples for laser-ablation. Some of the laser-printed techniques that are commonly considered for fabricating flexible sensors, which are discussed in this paper, include nanocomposite-based, laser-ablated, and 3D-printing. The developed sensors have been used for a range of applications, such as electrochemical and strain-sensing purposes. The challenges faced by the current printed flexible sensors, along with a market survey, are also outlined in this paper.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...