Protease-Activated Receptor-2 and Phospholipid Metabolism Analysis in Hyperuricemia-Induced Renal Injury.

Interstitial inflammation is an important mechanism of pathological damage in renal injury caused by hyperuricemia. Protease-activated receptor-2 (PAR2) is a class of targets that act upstream of the PI3K/AKT/NF-κB pathway and is involved in various inflammatory diseases. We induced a hyperuricemia model in rats by adenine and ethambutol gavage in an in vivo experiment. We demonstrated that PAR2 and PI3K/AKT/NF-κB pathway expression were significantly upregulated in renal tissues, with massive inflammatory cell infiltration in the renal interstitium and renal tissue injury. Treating hyperuricemic rats with AZ3451, a selective metabotropic antagonist of PAR2, we demonstrated that PAR2 antagonism inhibited the PI3K/AKT/NF-κB pathway and attenuated tubular dilation and tubulointerstitial inflammatory cell infiltration. The phospholipid metabolism profiles provided a perfect separation between the normal and hyperuricemic rats. In addition, we also found that AZ3451 can affect phospholipid metabolism. Our work suggests that PAR2 may mediate hyperuricemia-mediated renal injury by activating the PI3K/AKT/NF-κB pathway. The PAR2 antagonist AZ3451 may be a promising therapeutic strategy for hyperuricemia-induced inflammatory responses.

Crosstalk Between Histone and m6A Modifications and Emerging Roles of m6A RNA Methylation.

RNA, like DNA and proteins, has been discovered to undergo dynamic and reversible chemical alterations, increasing the diversity and functional complexity of the molecule. N-6-methyladenosine (m6A) RNA methylation serves as a bridge between transcription and translation and is critical for many diseases' progression. There is a complex interrelationship between m6A modifications and other epigenetic modifications. Their crosstalk significantly affects transcriptional outputs, translation, recruitment of chromatin modifiers, as well as the deployment of the m6A methyltransferase complex at target sites. This article outlines the potential function of m6A RNA methylation in epigenetics and summarizes its interactions with histone modifications.

Strengthened Optical Nonlinearity of V2C Hybrids Inlaid with Silver Nanoparticles.

The investigation of nonlinear optical characteristics resulting from the light-matter interactions of two-dimensional (2D) nano materials has contributed to the extensive use of photonics. In this study, we synthesize a 2D MXene (V2C) monolayer nanosheet by the selective etching of Al from V2AlC at room temperature and use the nanosecond Z-scan technique with 532 nm to determine the nonlinear optical characters of the Ag@V2C hybrid. The z-scan experiment reveals that Ag@V2C hybrids usually exhibits saturable absorption owing to the bleaching of the ground state plasma, and the switch from saturable absorption to reverse saturable absorption takes place. The findings demonstrate that Ag@V2C has optical nonlinear characters. The quantitative data of the nonlinear absorption of Ag@V2C varies with the wavelength and the reverse saturable absorption results from the two-photon absorption, which proves that Ag@V2C hybrids have great potential for future ultrathin optoelectronic devices.

The Significance of INHBE Expression in the Cancer Cells of Clear-Cell Renal Cell Carcinoma.

BACKGROUND: Activins and inhibins are structurally related dimeric glycoprotein hormones belonging to the transforming growth factor-ß superfamily but whether they are also involved in malignancy is far from clear. No study has reported the expression of INHBE in kidney cancer. The purpose of this study was to examine the expressions of INHBE in the tumor tissue of patients with clear-cell renal cell carcinoma (ccRCC) and to explore the pathologic significance. METHODS: The INHBE mRNA expression in the tumor tissue of ccRCC patients was analyzed by using RNA sequencing data from the TCGA database. To examine the expression of inhibin ßE protein, 241 ccRCC patients were recruited and immunohistochemistry was performed on the tumor tissue of these patients along with 39 normal renal samples. The association between the inhibin ßE expression level and patient's clinicopathological indices was evaluated. RESULTS: In the normal renal tissue, inhibin ßE was found to be expressed mainly by renal tubular epithelial cells. In the tumor tissue, inhibin ßE was expressed mainly in cancer cells. The expressions of INHBE mRNA and protein in the tumor tissue of ccRCC patients increased significantly compared with those in normal renal samples. There was a significant correlation between the level of inhibin ßE in the tumor tissue and tumor grade. Patients with a lower inhibin ßE expression in the tumor tissue were found to have a longer overall survival and disease-specific survival. CONCLUSIONS: INHBE might be involved in the pathogenesis of ccRCC and function as a tumor promoter.

Elimination of amino trimethylene phosphonic acid (ATMP) antiscalant in reverse osmosis concentrate using ozone: Anti-precipitation property changes and phosphorus removal.

Amino trimethylene phosphonic acid (ATMP) was widely used as an antiscalant in reverse osmosis (RO) systems to prevent membrane scaling, and entered RO concentrate at elevated levels. However, phosphonate antiscalants in RO concentrate might aggravate phosphorus pollution, remobilize heavy metals, and adversely affect the sedimentation treatment of RO concentrate. Ozonation was found an efficient method for ATMP treatment. The ATMP removal efficiencies with 8 mg/L ozone were 100% and 86.5% for ultrapure water and RO concentrate, respectively. The ATMP mineralization efficiency reached 46.5% with 8 mg/L ozone. The rate constant for the reaction between ATMP and ozone was 1.92 × 106 M-1 s-1. Increasing the pH from 3 to 9 decreased the ATMP removal efficiency from 90% to 30.9% but increased the orthophosphate formation to ATMP removal ratio from 0.11 to 0.48. The ATMP intermediates generated with low ozone dosages exhibited moderate chelation and anti-precipitation capacity, and their chelation and anti-precipitation capacity could be further attenuated by increasing the ozone dosage. Ozonation alone enhanced the growth potential for microalgae in RO concentrate because orthophosphate formed. Combining ozonation and coagulation effectively removed 83.0% of the total phosphorus from RO concentrate. The maximum algal density of Scenedesmus sp. LX1 decreased by 78.7% by ozonation and coagulation.

Study on synergistic effect of ozone and monochloramine on the degradation of chloromethylisothiazolinone biocide.

In this study, it was found that monochloramine induced the formation of reactive species during ozonation of chloromethylisothiazolinone (CMIT). CMIT was found recalcitrant to chloramine. However, chloramine promoted the degradation of CMIT by ozonation significantly. Hydroxyl radicals contributed most to CMIT degradation (87%) during ozone/chloramine synergistic oxidation process (SOP). The hydroxyl radical exposure during ozone/chloramine SOP was around 7.9 times higher than that of ozonation process. The hydroxyl radical yield of ozone/chloramine SOP was estimated to be 32%. The reaction mechanisms between ozone and chloramine were postulated to include the oxygen transfer reaction to form singlet oxygen, and the formation of hydroxyl radical by the insertion pathway or electron transfer pathway. Chloramine dosage and pH are essential influencing factors. The degradation of CMIT increased from 41% to 74% with increasing chloramine dosage (0-20 µM), and then decreased to 65% when chloramine dosage continually increased to 40 µM. Ozone/chloramine SOP showed better performance at acidic or neutral conditions than basic condition. Based on the intermediates identified, the degradation pathway of CMIT during ozone/chloramine SOP included the oxidation of sulfur atom and the substitution of chlorine group by hydroxyl group. The oxidation of sulfur atom induced lower toxicities of transformation products. The toxicities of hydroxylation products were lower to fish and algae, but higher to daphnia. Based on the GC-ECD results, only trichloromethane (1.94 µg/L) was detected after ozone/chloramine SOP, accounting for 0.17% (µM/µM) of the CMIT removal.

Assessment and mechanisms of microalgae growth inhibition by phosphonates: Effects of intrinsic toxicity and complexation.

The effects of phosphonates, the heavily-used antiscalants in reverse osmosis systems, on microalgae are controversial, although they are harmless to most aquatic organisms. Herein, we assessed the inhibitory effects of etidronic acid (HEDP) and diethylenetriamine penta(methylene phosphonic acid) (DTPMP) on algal growth and revealed the mechanisms involved in both intrinsic toxicity and complexation. The phosphonates showed weak influences on Scenedesmus sp. LX1 in the first 4 d of cultivation. In contrast, a significant growth inhibition was observed subsequently with half maximal effective concentrations of 57.6 and 35.7 mg/L for HEDP and DTPMP, respectively, at 10 d. The phosphonates had little effect on cellular energy transfer and oxidative stress, quantified by adenosine triphosphate level and superoxide dismutase activity, respectively, demonstrating weak intrinsic toxicities to algal cells. Phosphonates blocked the algal assimilation of iron ions through complexation. Severe iron deficiency limited photosynthetic activity and caused chlorophyll decline, resulting in a functional loss of the photosystem followed by complete algal growth inhibition at the late cultivation stage. Our findings point to a potential ecological impact wherein harmful algal blooms are induced by the natural degradation of phosphonates due to the release of both iron and phosphate ions that stimulate algal regrowth after disinhibition.

Mechanism and kinetics of methylisothiazolinone removal by cultivation of Scenedesmus sp. LX1.

Methylisothiazolinone (MIT) is a widely used non-oxidizing biocide for membrane biofouling control in reverse osmosis (RO) systems usually with high dosages. However, few investigations have focused on MIT removal through bio-processes, since it is highly bio-toxic. This study proposed a novel biotreatment approach for efficient MIT degradation by Scenedesmus sp. LX1, a microalga with strong resistance capability against extreme MIT toxicity. Results showed that MIT (3 mg/L) could be completely removed within 4 days' cultivation with a half-life of only 0.79 d. Biodegradation was the primary removal mechanism and this metabolic process did not rely on bacterial consortia, soluble algal products secretion or algal growth. The main pathway was proposed as ring cleavage followed by methylation and carboxylation through the identification of MIT transformation products. MIT biodegradation followed the pseudo-first-order kinetics under growth control. A new kinetic model was presented to depict the MIT removal considering algal growth, and this model could be used for generally describing non-nutritive contaminants biodegradation. The algal biodegradation capability was independent of the initial biocide concentration, and MIT removal could be enhanced by increasing the initial algal density. Our results highlight the potential application of algal cultivation for MIT-containing wastewater biotreatment, such as RO concentrate.

Comparison of carbonized and graphitized carbon fiber electrodes under flow-through electrode system (FES) for high-efficiency bacterial inactivation.

The disinfection performance of a flow-through electrode system (FES) was systematically evaluated using different carbonized (C1, C2, and C3) and corresponding graphitized (G1, G2, and G3) carbon fiber felt (CFF) electrodes. The physicochemical and electrochemical properties were characterized to identify the differences among CFFs. Graphitized CFFs (gCFFs) can achieve complete inactivation of Escherichia coli (>6 log) at the voltage of 3 V and flux of 120-3600 L/(m2 h) for high conductivity and chemical stability, while carbonized CFFs (cCFFs) only achieved around 1 log removal with obvious carbon corrosion. For the gCFFs, G1 (>6 log removal) with higher conductivity, better graphite structure, and larger surface area (related to fiber diameter and density) presented better disinfection performance at the flow rate of 30 mL/min than G2 (∼3 log) and G3(∼1 log). Furthermore, no regrowth and reactivation of bacteria occurred during the storage under visible light illumination after FES treatment. Three parallel FESs with G1 were operated continuously for one week (24 h per day, 7 days) treating the solution with an E. coli concentration ranging from 106 to 107 CFU/mL at the applied voltage of 3 V and the flow rate of 20 mL/min. No live bacteria were detected in the effluent of any of these three FESs. In-situ sampling experiments demonstrated that the inactivation of bacteria on anode was the dominant mechanism for FES treatment, which can be attributed to the sequential adsorption, direct-oxidation and desorption process on anode, instead of indirect oxidation by generating chemical oxidants. In addition, hydroxide ion generated from cathode reaction enhanced anode adsorption and inactivation of bacteria by providing alkaline environment. Combining the analysis results of material properties and disinfection performance, the gCFF-based FES was suggested to be a low-cost, high-efficiency, and safe alternative for future water disinfection.

UV/chlorine oxidation of the phosphonate antiscalant 1-Hydroxyethane-1, 1-diphosphonic acid (HEDP) used for reverse osmosis processes: Organic phosphorus removal and scale inhibition properties changes.

Reverse osmosis (RO) technology plays an increasingly important role in municipal wastewater reclamation. However, the antiscalants used in RO systems showed adverse effects to the ecosystem: impending the removal of hardness from RO concentrates; inducing phosphorus pollution in receiving water; enhancing the trace metal migration in the environment. In this study, UV/chlorine advanced oxidation process was used to oxidize a typical phosphoric antiscalant (1-Hydroxyethane-1, 1-diphosphonic Acid, HEDP). UV/chlorine showed significant synergetic effects on HEDP degradation compared to UV irradiation or chlorination alone. Compared to UV/H2O2 oxidation, UV/chlorine process is more efficient for HEDP transformation with chlorine dosages ranging from 0.1 to 0.4 mmoL/L. Chorine dosage showed dual effects on HEDP oxidation by UV/chlorine: the increasing trend of transformation efficiency of HEDP got slower with increasing chlorine dosage. The transformation efficiency of HEDP by UV/chlorine oxidation decreased from 39% to 14% with pH increasing from 4.5 to 9.0, likely due to the higher quantum yields and lower radical quenching rates of HOCl than those of OCl-. The transformation efficiency of HEDP decreased 14% and 42% with 30 mM of chloride and bicarbonate, respectively. The presence of nitrate promoted the oxidation of HEDP by UV/chlorine: the transformation efficiency increased 5% and 83% with the presence of 5 mM and 30 mM nitrate, respectively. Based on the static scale inhibition tests, UV/chlorine oxidation is effective at removing the scale inhibition ability of HEDP. During UV/chlorine process, the maximum scale inhibition ratio decreased from 66% to 34% as the removal of phosphonate ligand from HEDP increased to 80%.

2-Phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) degradation by ozonation: Kinetics, phosphorus transformation, anti-precipitation property changes and phosphorus removal.

2-Phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) is an antiscalant that is widely used in reverse osmosis (RO) systems. Because of its high concentration in RO concentrate, eutrophication risk and anti-precipitation properties may affect subsequent treatments, therefore treatment strategies are needed to eliminate such substances. In this study, PBTCA was degraded by ozonation. The results show that PBTCA reacted with ozone molecules and hydroxyl radicals, with second-order rate constants of (0.12 ±â€¯0.002) and (7.83 ±â€¯1.51) × 108 L mol-1 s-1, respectively. The phosphorus in PBTCA (PP) was transformed into organic phosphorus except for PBTCA (PO), and inorganic phosphorus (PI); PO was further transformed into PI. The changes in the concentrations of these phosphorus forms were investigated by model simulation. Simulation showed that the rate of PP transformation into PO was 5.5 times higher than that into PI. PBTCA was ozonated much faster at alkaline pH than at acidic pH. This is ascribed to different amounts of ozone molecules and hydroxyl radicals, and their different reaction rates with PBTCA. Furthermore, anti-precipitation property was reduced during ozonation, as shown by the amounts and morphology changes of the precipitates. PBTCA concentration for 50% anti-precipitation (AP50) did not change during ozonation, indicating that the transformation products generated during ozonation did not have anti-precipitation effects. Phosphorus in PBTCA was removed by ozonation-coagulation treatment. Total phosphorus and inorganic phosphorus were removed efficiently by using ferric chloride as a coagulant. The coagulants tended to bind with inorganic phosphorus to form flocs. Meanwhile, flocs were more easily to aggregate and precipitate as anti-precipitation effect was gradually removed, thus more phosphorus was removed. A combination of ozonation and coagulation removed PBTCA effectively and simultaneously reduced its anti-precipitation property and phosphorus.

The application of UV/PS oxidation for removal of a quaternary ammonium compound of dodecyl trimethyl ammonium chloride (DTAC): The kinetics and mechanism.

Dodecyltrimethylammonium chloride (DTAC) is a quaternary ammonium compound (QAC) that is a widespread contaminant in environmental media and therefore of increasing concern. The synergistic effect with UV irradiation and persulfate (UV/PS) was used to degrade DTAC. The removal of DTAC was 91% with the PS dosage of 75.6 µM (UV/PS) and UV fluence of 870 mJ·cm-2. The second-order rate constants of DTAC with HO and SO4- were determined to be kHO, DTAC (4.2 ±â€¯0.18) × 109 M-1 s-1 and kSO4∙-, DTAC (2.5 ±â€¯0.27) × 109 M-1 s-1, respectively. The contributions of HO and SO4- to DTAC degradation in the UV/PS were found to be 30% and 62% at pH 7, respectively. The contributions of SO4- and HO were not significantly influenced by acidic medium (pH 3-pH 7), whereas they were significantly affected by basic medium (pH 7-pH 11). The wastewater matrixes of HCO3-, Cl- and humic acid inhibited the DTAC elimination, whereas NO3- and SO42- had no significant impact on its elimination. Moreover, the kobs,DTAC in the reverse osmosis influent (ROI) and reverse osmosis concentrate (ROC) were examined to be 0.04 to 0.1 min-1 and 0.02 to 0.05 min-1, respectively, as the PS dosage increased from 18.9 to 113.4 µM. The inhibitive effects of matrix in ROI and ROC was 70% and 81%, respectively. The contribution of radical scavenging effect by matrix ROI and ROC was more significant to DTAC degradation than UV scattering effect in ROI and ROC matrices. A UV fluence of 1305 mJ·cm-2 was necessitated for complete detoxification and DTAC solution by UV/PS.

Potential risks from UV/H2O2 oxidation and UV photocatalysis: A review of toxic, assimilable, and sensory-unpleasant transformation products.

UV based advanced oxidation processes (UV-AOPs) that efficiently eliminate organic pollutants during water treatment have been the subject of numerous investigations. Most organic pollutants are not completely mineralized during UV-AOPs but are partially oxidized into transformation products (TPs), thereby adding complexity to the treated water and posing risks to humans, ecological systems, and the environment. While the degradation kinetics and mechanisms of pollutants have been widely documented, there is little information about the risks associated with TPs. In this review, we have collated recent knowledge about the harmful TPs that are generated in UV/H2O2 and UV photocatalysis, two UV-AOPs that have been studied extensively. Toxic and assimilable TPs were ubiquitously observed in more than 80% of UV-AOPs of organic pollutants, of which the toxicity and assimilability levels changed with variations in the reaction conditions, such as the UV fluence and oxidant dosage. Previous studies and modeling assessments showed that toxic and assimilable TPs may be generated during hydroxylation, dealkylation, decarboxylation, and deamination. Among various reactions, TPs generated from dealkylation and decarboxylation were generally less and more toxic than the parent pollutants, respectively; TPs generated from decarboxylation and deamination were generally less and more assimilable than the parent pollutants, respectively. There is also potential concern about the sensory-unpleasant TPs generated by oxidations and subsequent metabolism of microorganisms. In this overview, we stress the need to include both the concentrations of organic pollutants and the evaluations of the risks from TPs for the quality assessments of the water treated by UV-AOPs.

Enhanced high-solids anaerobic digestion of waste activated sludge by the addition of scrap iron.

Anaerobic digestion of waste activated sludge usually requires pretreatment procedure to improve the bioavailability of sludge, which involves considerable energy and high expenditures. This study proposes a cost-effective method for enhanced anaerobic digestion of sludge without a pretreatment by directly adding iron into the digester. The results showed that addition of Fe(0) powder could enhance 14.46% methane yield, and Fe scrap (clean scrap) could further enhance methane yield (improving rate 21.28%) because the scrap has better mass transfer efficiency with sludge and liquid than Fe(0) powder. The scrap of Fe with rust (rusty scrap) could induce microbial Fe(III) reduction, which resulted in achieving the highest methane yield (improving rate 29.51%), and the reduction rate of volatile suspended solids (VSS) was also highest (48.27%) among Fe powder, clean scrap and rusty scrap. PCR-DGGE proved that the addition of rusty scrap could enhance diversity of acetobacteria and enrich iron-reducing bacteria to enhance degradation of complex substrates.