Evaluating the advancements in a recently introduced universal adhesive compared to its predecessor.

Background/purpose: The dental adhesive market is constantly evolving to meet the demands of dentists and patients, but new products and upgrades should be rigorously evaluated before being used in clinical practice. This study investigated the physicomechanical properties and dentin bonding efficacy of a newly upgraded universal adhesive compared to its predecessor. Materials and methods: Twenty-four molars were divided into four groups (n = 6/group) based on adhesive (new vs. predecessor) and application mode [self-etch (SE) vs. etch-and-rinse (ER)] for evaluating their dentin microtensile bond strength (µTBS), failure pattern, and bonding interface. Additional thirty-six molars' crowns were perpendicularly sectioned to obtain flat mid-coronal dentin discs. The opposing dentin surfaces of each disc received contrasting treatments (new/predecessor adhesive applied in SE/ER mode), resulting in six interventions. The bonded discs (n = 6/intervention) were used to assess the adhesives' survival probability employing a double-sided µTBS test. The other physicomechanical properties examined were adhesives' oxygen inhibition layer (OIL), viscosity, hardness, elastic modulus, degree of conversion (DC), and in-situ DC. Results: Both adhesive versions showed similar µTBS (P > 0.05), failure pattern (P > 0.05), and survival probability (P > 0.008). ER mode promoted resin tag formation and exhibited a slender adhesive layer for both adhesives. The newer adhesive version showed a thinner adhesive layer in general with narrower OIL (P < 0.001), less viscosity (P < 0.001), higher hardness (P < 0.05), elastic modulus (P < 0.05), DC (P < 0.001), and in-situ DC (P < 0.001). Conclusion: While the newly updated adhesive had superior physicomechanical properties with more fluidity, its dentin bonding efficacy and survival probability were comparable to its predecessor.

Effect of Simulated Dental Pulpal Pressure Using Fetal Bovine Serum for the Bonding Performance of Contemporary Adhesive to Dentin.

This study evaluated the effect of simulated pulpal pressure (SPP) conditions and storage time on contemporary adhesive systems' microtensile bond strength (µTBS) to dentin. Extracted human molars were prepared and randomly divided into four groups according to the adhesives: Clearfil Megabond 2 (CSE), Beautibond Xtreme Universal (BXU), G2-Bond (G2B), and Scotchbond Universal Plus (SBP). Each adhesive group was further divided following the SPP conditions: control with no simulation (SPP-CTR), SPP with distilled water (SPP-DTW), and SPP with fetal bovine serum (SPP-FBS). Resin composite build-ups were prepared, and teeth were stored in water (37 °C) for 24 h (24 h) and 3 months (3 m). Then, teeth were sectioned to obtain resin-dentin bonded beams and tested to determine the µTBS. Data were analyzed using three-way ANOVA, Tukey post hoc tests (=0.05), and Weibull failure analysis. Failure mode was observed using scanning electron microscopy. The µTBS response was affected by adhesive systems, simulated pulpal pressure conditions, and storage time. SPP-CTR groups presented a higher overall bond strength than SPP-DTW and SPP-FBS, which were not significantly different from each other. Only for SBP, the SPP-FBS group showed higher µTBS than the SPP-DTW group. The Weibull analysis showed that the bonding reliability and durability under SPP-DTW and SPP-FBS were inferior to SPP-CTR, and the 24 h bonding quality of adhesives to dentin was superior to that of 3 m. SPP drastically reduced the µTBS of all adhesives to dentin regardless of solution (distilled water or fetal bovine serum). Storage after 3 m also decreased µTBS despite the SPP condition.

Green synthesis of chitosan- and fluoride-functionalized silver nanoparticles using Camellia sinensis: Characterization and dental applications.

The development of new biocompatible and eco-friendly materials is essential for the future of dental practice, especially for the management of dental caries. In this study, a novel and simple method was applied for the green synthesis of silver nanoparticles (AgNPs) from the aqueous extract of Camellia sinensis (WT) and functionalized with chitosan (CHS) and NaF. The effects of WT_AgNPs application on demineralized dentin were evaluated for potential dental applications. The WT_AgNPs showed molecular groups related to organic compounds, potentially acting as reducing and capping agents. All AgNPs presented spherical shapes with crystal sizes of approximately 20 nm. Forty human molars were assigned to control: sound (SD) and demineralised dentine (DD), and experimental groups: WT_AgNPs, WT_AgNPs_NaF, and WT_AgNPs_CHS. Then, the NPs were applied to DD to evaluate the chemical, crystallographic, and microstructural characteristics of treated-dentine. In addition, a three-point bending test was employed to assess mechanical response. The application of WT_AgNPs indicated a higher mineralisation degree and crystallites sizes of hydroxyapatite than the DD group. SEM images showed that WT_AgNPs presented different degrees of aggregation and distribution patterns. The dentine flexural strength was significantly increased in all WT_AgNPs. The application of WT_AgNPs demonstrated remineralising and strengthening potential on demineralised dentine.

Effects of Short-Term Exposure of Chloramine-T Solution on the Characteristics of Light-Cured and Chemical-Cured Adhesives.

This study evaluated the effect of a 0.5% chloramine T solution on a chemical-cured universal adhesive by comparing the light-cured, one-step, self-etch adhesive for the bonding performance, mechanical properties, and resin-dentin interfacial characteristics. Caries-free human molars were randomly assigned into eight groups based on the bonding systems employed (Bond Force II, BF and Bondmer Lightless, BL), the immersion solutions used before bonding (0.5% chloramine T solution and distilled water), and the immersion durations (5 and 60 min). Microtensile bond strength (µTBS), nanoleakage evaluation, and nanoindentation tests were performed, and the surface morphology of the resin-dentin interface was examined using a focus ion beam/scanning ion microscopy system. Immersion in chloramine-T for 5 min significantly decreased the µTBS of Bondmer Lightless (from 22.62 to 12.87 MPa) compared with that in distilled water. Moreover, there was also a decreasing trend after immersing in chloramine-T for 60 min (from 19.11 to 13.93 MPa). Chloramine T was found to have no effect on the hardness, elastic modulus, or morphological characteristics of the ion-beam milled resin-dentin interfacial surfaces in the tested adhesives, suggesting that chloramine T might reduce the bond strength by interfering with the interaction and the sealing between the adhesive resin and dentin in the chemical-cured universal adhesive, albeit without affecting the mechanical properties.

Digitally Guided Direct Composite Injection Technique with a Bi-layer Clear Mini-Index for the Management of Extensive Occlusal Caries in a Pediatric Patient: A Case Report.

PURPOSE: This case report presents a direct composite inverse injection technique using a bi-layer clear mini-index fabricated with a digital workflow to restore extensive posterior occlusal cavities in a 13-year-old patient. MATERIALS AND METHODS: After a root canal treatment in the right mandibular first molar and step-wise excavation of deep caries in the left mandibular first molar, the extensive occlusal restorations were digitally designed using CAD software, upon which digital wax-ups were 3D-printed. Bi-layer clear mini-indices consisting of a hard outer plastic layer and an elastic inner silicone layer were prepared from the 3D-printed cast. The bonding surfaces were deproteinized using a 6% sodium hypochlorite solution, and an antioxidant (Clearfil DC Activator; Kuraray Noritake) was utilized to improve the dentin bonding durability of a 2-step self-etch adhesive (Clearfil SE Bond 2; Kuraray Noritake). Subsequently, a highly filled universal-shade flowable resin composite (RC) was incrementally placed into the cavities. To create the final occlusal morphology, the same RC was inversely injected through the opening of the bi-layer indices. RESULTS: The workflow was feasible, and the occlusal cavities were efficiently restored using the injection technique. Occlusal carving and adjustments of the morphology were not necessary, leading to less chair time. At the 1-year follow-up, the clinical outcome was excellent. CONCLUSION: The injection technique with a bi-layer clear mini-index accurately translated the digital wax-ups into large, final restorations. Precise morphology and shortened chair time enhanced patient satisfaction, but at the expense of multiple visits.

Release of leachable products from resinous compounds in the saliva of children with anterior open bite treated with spur.

BACKGROUND: To evaluate the release of bisphenol-A glycidyl methacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), bisphenol A (BPA), and phthalates of the composite resin used in the bonding of spurs applied in the treatment of children with anterior open bite and its effects on human keratinocytes. METHODOLOGY: Saliva samples of 22 children were collected before spur attachment (baseline) and 30 minutes (min) and 24 hours (h) after spur bonding. Analysis was performed using high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry (HPLC-MS/MS) and gas chromatography coupled to mass spectrometry (GC-MS). Standardized resin increments were added to three different dilutions of the cell culture medium. Keratinocytes (HaCaT) were cultivated in the conditioned media and evaluated for cell viability (MTT) and cell scratch assay. RESULTS: The levels of BisGMA (1.74±0.27 µg/mL), TEGDMA (2.29±0.36 µg/mL), and BPA (3.264±0.88 µg/L) in the saliva after 30 min, in comparison to baseline (0±0 µg/mL, 0±0 µg/mL, and 1.15±0.21 µg/L, respectively), presented higher numbers. After 24 h, the levels of the monomers were similar to the baseline. Phthalates showed no significant difference among groups. HaCat cells showed increased viability and reduced cell migration over time after exposure to methacrylate-based resin composites. CONCLUSION: Resin composites, used to attach spurs in children with anterior open bite during orthodontic treatment, release monomers after polymerization and can influence the behavior of human keratinocytes, even at very low concentrations. Orthodontists should be aware of the risks of the resinous compounds release and preventive procedures should be held to reduce patient exposure.

Hydroxyapatite Affects the Physicochemical Properties of Contemporary One-Step Self-Etch Adhesives.

The study aimed to evaluate the influence of the manipulation surfaces on the physical properties of one-step self-etch adhesives (1-SEAs). Scotchbond Universal (SBU), Clearfil Universal Bond Quick ER (UBQ), and an experimental adhesive (UBQexp) were manipulated on different surfaces: manufacturer's Teflon-based dispensing dish (TD) or hydroxyapatite plate (HA). After manipulation of the adhesives, the pH of each 1-SEA was measured. Samples of each adhesive/manipulation surface were prepared and subjected to water sorption (WS)/solubility (SL) and flexural strength tests. The modulus of elasticity (E) was measured in dry and wet conditions before and after 24 h water storage, and the percentage of variation of E (ΔE) was calculated. Results were analyzed using the t-test with Bonferroni corrections (α = 0.05). When adhesives were manipulated on the HA plate, there was a significant increase in the adhesives' pH. WS and SL of all 1-SEAs decreased when the HA was used. Only SBU showed higher flexural strength when manipulated on the HA compared to the manipulation on TD under dry and wet conditions. For each 1-SEA, the use of HA resulted in significantly higher E in dry and wet conditions. ΔE of all adhesives was smaller with the manipulation on HA than on TD. It was concluded that the manipulation of 1-SEA on a hydroxyapatite plate considerably affected the adhesives' properties.

Enhanced mechanical properties, anti-biofilm activity, and cytocompatibility of a methacrylate-based polymer loaded with native multiwalled carbon nanotubes.

OBJECTIVES: We aimed to optimize the mechanical and biological properties of a conventional methacrylate-based dental polymer by loading it with double- and triple-walled carbon nanotubes as growth (DTWCNTG). METHODS: A formulation of bisphenol A-glycidyl methacrylate and triethylene glycol dimethacrylate (mass ratio = 2:1) was mixed with DTWCNTG at concentrations of 0.0% (control), 0.001%, 0.005%, and 0.010%. The concentrations were physicochemical and morphologically evaluated, and antibacterial activity was assessed by seeding a Streptococcus mutans strain (ATCC 25175) on the experimental polymeric surfaces. Cellular survival and osteodifferentiation were evaluated in epithelial (HaCat) and preosteoblast cells (MC3T3-E1). RESULTS: The 0.001% DTWCNTG concentration yielded higher compressive strength, elastic modulus, flexural strength, flexural modulus, water sorption, and solubility than the control. The degree of conversion and color did not significantly change with a low amount of DTWCNTG incorporated into the polymer. Antibacterial activity significantly improved when tested on the 0.001% DTWCNTG discs. No groups showed cytotoxicity in a short-term analysis and adding DTWCNTG favored MC3T3-E1 mineralization over the control, particularly in the 0.001% formulation. SIGNIFICANCE: The micro-addition of 0.001% DTWCNTG confers mechanical resistance, antimicrobial properties, and bioactivity to methacrylate-based polymers without significantly compromising color. Incorporating DTWCNTG improved dental composite properties and could be a biomodified material for minimally invasive procedures.

Cause-Effect Relationship of Varying Bonding Thicknesses in Dentin Adhesion of Universal Adhesives.

PURPOSE: To evaluate whether varying thicknesses of universal adhesives utilizing the additional coating strategy would affect their microtensile bond strength (µTBS) to dentin, hardness, and elastic modulus (mechanical properties). MATERIALS AND METHODS: Ninety-nine human maxillary premolars were cut to expose coronal dentin, ground with regular-grit diamond burs, and randomly distributed into 9 groups based on 1. adhesive: Scotchbond Universal Adhesive (SB; universal), G Premio Bond (GP; universal) and Clearfil Megabond 2 (MB; two-step self-etch; control); and 2. application strategy (one, two or three coats; each coat light cured). After adhesive application and resin composite buildup, the bonded teeth were stored in distilled water (37°C; 24 h). Resin-dentin sticks from eight premolars per group (each premolar yielded 3 sticks; n = 24 sticks altogether) were prepared for the µTBS test, followed by measurement of the adhesive thicknesses at their fractured ends using SEM. The mechanical properties of the adhesive layers produced by different coats were evaluated on separate resin-dentin slices (n = 3 teeth per group). RESULTS: Two coats significantly increased the µTBS (p < 0.001) of all the adhesives. The correlation between adhesive thickness and bond strength was positive for GP but negative for SB. MB did not show any correlation. Additional coating significantly increased the mechanical properties of GP (p < 0.05) but did not affect SB and MB (p < 0.05). CONCLUSION: An additional adhesive coating over the manufacturers' recommendations improved the bond strength of all the adhesives tested. However, the increased mechanical properties of the adhesives with additional curing was material dependent.

Evaluation of the clinical performance of GIOMERs and comparison with other conventional restorative materials in permanent teeth: a systematic review and meta-analysis.

Aim The aim of this systematic review and meta-analysis was to analyse the clinical performance of GIOMER restorative composites and compare them with other conventional restorative materials in permanent teeth.Methods Searches in PubMed, Web of Science, Scopus, Ovid and Cochrane Library were conducted. Grey literature search was also performed. Clinical trials that evaluated the clinical performance of restorations with GIOMER restorative composites in permanent teeth compared to those using composite resin, glass ionomer cement, resin-modified glass ionomer cement (RMGIC) and other GIOMERs were included. Meta-analyses comparing GIOMER restorative composites with RMGIC at 6- and 12-month follow-ups and comparing two types of GIOMER were feasible.Results Ten studies fulfilled the inclusion criteria. In these studies, GIOMER was compared to different types of dental restoration materials. Dental restorations were evaluated by United States Public Health Service criteria in all included studies. Four studies were suitable for meta-analysis, which showed significant differences between GIOMER and RMGIC surface roughness at 6-month (odds ratio [OR] = 6.56; 95% confidence interval [CI] = 2.38-18.13) and 12-month (OR = 8.76; CI = 3.19-24.07) follow-ups. No significant differences between GIOMER restorative composites and RMGIC for marginal adaptation were found at 6- and 12-month follow-ups. When comparing two GIOMERs, significant differences were seen between Beautifil II and Beautifil Flowable Plus F00 for marginal staining (OR = 2.58; CI = 1.42-23.27; I2 = 0%) and surface roughness (OR = 4.59; CI = 1.11-18.97; I2 = 0%) at the 36-month follow-up. No significant differences between Beautifil II and Beautifil Flowable Plus F00 were seen for marginal adaptation and anatomic form at 6-, 18- and 36-month follow-ups.Conclusions GIOMER restorative composites presented similar performance concerning marginal adaptation and better surface roughness when compared to RMGIC. GIOMER Beautifil II presented similar performance to GIOMER Beautifil Flow Plus F00 concerning marginal adaptation and anatomic form and worse marginal staining and surface roughness when compared to Beautifil Flowable Plus F00.

Teledentistry as an Effective Tool for the Communication Improvement between Dentists and Patients: An Overview.

Teledentistry is an online dental care service that allows patients and dentists to meet in real time, safely, without being at the same location. During the COVID-19 pandemic, real-time videoconferencing has gained popularity in the field of teledentistry, with numerous benefits for both patients and dentists. Online consultations can minimize costs, maximize time, and provide more convenient care options for both patients and dentists. When practicing teledentistry, a dentist must establish a good doctor-patient relationship. Dentists must ensure that the telecommunication solution that they choose meets their clinical requirements and complies with privacy laws. Dentists should provide adequate information to patients about the limitations, advantages, and disadvantages that may occur during online consultation. Dentists must follow guidelines and procedures regarding informed consent, patient details, personal communications, and consultancies' privacy and confidentiality. The patient should be aware of the limitations of teledentistry, and dentists will provide the best advice possible in the absence of a face-to-face consultation. This article discusses how teledentistry could be an effective tool for dentists and patients.

Evaluation of Color and Spectral Behavior of a Novel Flowable Resin Composite after Water Aging: An In Vitro Study.

BACKGROUND: This study aimed to evaluate the color matching, light transmittance, and reflectance characteristics of the novel flowable resin composite OCF-001 (OCF). METHODS: Fifty-four resin composite molds were made with simulated class I cavities of A2, A3, and A4 shades by filling the rubber mold interspace with Estelite Sigma Quick (ESQ), Gracefil Putty (GP) and Filtek Supremme Ultra (FSU). After applying the adhesive, three different flowable resin composites (n = 6), OCF, Gracefil LoFlo (GLF), and Supreme Ultra Flowable (SUF), were used to fill the cavities. A colorimeter was used to measure the color parameters (CIEDE2000). The color measurements were taken immediately and after 28 days. Data were analyzed using the nonparametric Kruskal-Wallis (α = 0.05) and Wilcoxon tests. The light transmittance and reflection characteristics were measured with a black background using a spectrophotometer under D65 illumination. RESULTS: The ΔE00, and ΔC of OCF was lower than other tested materials in A2 and A3 shades both immediately and after 28 days. OCF showed the highest transmittance characteristic, and a relatively stable reflectance curve in all the wavelengths. CONCLUSIONS: OCF showed better shade matching with the surrounding shades of A2 and A3, a relative uniform reflectance and higher light transmission properties.

Evaluation of periodontal parameters and gingival crevicular fluid cytokines in children with anterior open bite receiving passive orthodontic treatment with a spur.

Objective: To evaluate clinical parameters and gingival crevicular fluid (GCF) cytokines in children with anterior open bite receiving passive orthodontic treatment with spurs. Methods: Twenty children with indications for interceptive orthodontic treatment, an anterior open bite, and good oral hygiene and periodontal health were included in this study. GCF samples were collected from the mandibular and maxillary central incisors before (baseline) and 24 hours and 7 days after spur bonding. Clinical and periodontal examinations and cytokine analyses were performed. Results: At 7 days after spur attachment, gingival bleeding in the mandibular group was increased relative to that in the maxillary group. Visible plaque was correlated with gingival bleeding at 7 days and the GCF volume at 24 hours after spur attachment. Compared with those at baseline, interleukin (IL)-8 levels in the maxillary group and IL-1ß levels in both tooth groups increased at both 24 hours and 7 days and at 7 days, respectively. At 24 hours, IL-8, IL-1ß, and IL-6 levels were higher in the maxillary group than in the mandibular group. Cytokine production was positively correlated with increased GCF volume, but not with gingival bleeding, visible plaque, or probing depth. Conclusions: Although orthodontic treatment with spurs in children resulted in increased gingival bleeding around the mandibular incisors, IL levels were higher around the maxillary incisors and not correlated with periodontal parameters. Increased cytokine levels in GCF may be associated with the initial tooth movement during open bite correction with a passive orthodontic appliance in children.

Comparison of instrumental methods for color change assessment of Giomer resins.

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

Antibacterial potential of colloidal platinum nanoparticles against Streptococcus mutans.

This study evaluated the antibacterial activity of colloidal platinum nanoparticles (CPNs) toward Streptococcus mutans (S. mutans) viability. S. mutans 109c was treated with water and three CPN solutions at 37°C for 24 h (i.e., control, PAA-Pt, C-Pt, C-CyD-Pt). Dilution series (10-1-10-5) were prepared using brain heart infusion (BHI) broth for all samples, and a 100 µL suspension of each dilution was spread onto a BHI agar plate. Colony-forming units (CFU/mL) were determined after 24 h. The effects of CPNs on S. mutans survival and biofilm formation were investigated using fluorescence and scanning electron microscopies. The antibacterial rate of S. mutans increased with increasing concentrations of all three CPNs, with PAA-Pt nanoparticles exhibiting the highest antibacterial efficacy. CPNs were found to reduce S. mutans growth and inhibit biofilm formation remarkably.

Release of leachable products from resinous compounds in the saliva of children with anterior open bite treated with spur

Abstract To evaluate the release of bisphenol-A glycidyl methacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), bisphenol A (BPA), and phthalates of the composite resin used in the bonding of spurs applied in the treatment of children with anterior open bite and its effects on human keratinocytes. Methodology Saliva samples of 22 children were collected before spur attachment (baseline) and 30 minutes (min) and 24 hours (h) after spur bonding. Analysis was performed using high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry (HPLC-MS/MS) and gas chromatography coupled to mass spectrometry (GC-MS). Standardized resin increments were added to three different dilutions of the cell culture medium. Keratinocytes (HaCaT) were cultivated in the conditioned media and evaluated for cell viability (MTT) and cell scratch assay. Results The levels of BisGMA (1.74±0.27 μg/mL), TEGDMA (2.29±0.36 μg/mL), and BPA (3.264±0.88 μg/L) in the saliva after 30 min, in comparison to baseline (0±0 μg/mL, 0±0 μg/mL, and 1.15±0.21 μg/L, respectively), presented higher numbers. After 24 h, the levels of the monomers were similar to the baseline. Phthalates showed no significant difference among groups. HaCat cells showed increased viability and reduced cell migration over time after exposure to methacrylate-based resin composites. Conclusion Resin composites, used to attach spurs in children with anterior open bite during orthodontic treatment, release monomers after polymerization and can influence the behavior of human keratinocytes, even at very low concentrations. Orthodontists should be aware of the risks of the resinous compounds release and preventive procedures should be held to reduce patient exposure.

UV-Mediated Photofunctionalization of Indirect Restorative Materials Enhances Bonding to a Resin-Based Luting Agent.

PURPOSE: The potential of UV-mediated photofunctionalization to enhance the resin-based luting agent bonding performance to aged materials was investigated. METHODS: Sixty samples of each material were prepared. Yttria-stabilized zirconia (YZr) and Pd-Au alloy (Pd-Au) plates were fabricated and sandblasted. Lithium disilicate glass-ceramic (LDS) was CAD-CAM prepared and ground with #800 SiC paper. Half of the specimens were immersed in machine oil for 24 h to simulate the carbon adsorption. Then, all of the specimens (noncarbon- and carbon-adsorbed) were submitted to UV-mediated photofunctionalization with a 15 W UV-LED (265 nm, 300 mA, 7692 µW/cm2) for 0 (control groups), 5, and 15 min and subjected to contact angle (Ɵ) measurement and bonded using a resin cement (Panavia™ V5, Kuraray Noritake, Japan). The tensile bond strength (TBS) test was performed after 24 h. The Ɵ (°) and TBS (MPa) data were statistically analyzed using two-way ANOVA and Bonferroni correction tests (α = 0.05). RESULTS: In the carbon-adsorbed groups, UV-mediated photofunctionalization for 5 min significantly decreased Ɵ of all materials and increased TBS of YZr, and UV for 15 min significantly increased the TBS of LDS and Pd-Au. In noncarbon-adsorbed groups, UV-photofunctionalization did not significantly change the Ɵ or TBS except YZr specimens UV-photofunctionalized for 15 min. CONCLUSION: UV-mediated photofunctionalization might have removed the adsorbed hydrocarbon molecules from the materials' surfaces and enhanced bond strengths of Panavia™ V5 to YZr, LDS, and Pd-Au. Additionally, UV-mediated photofunctionalization improved the overall TBS of YZr. Further investigation on the optimum conditions of UV photofunctionalization on indirect restorative materials should be conducted.

Characterization of an Experimental Two-Step Self-Etch Adhesive's Bonding Performance and Resin-Dentin Interfacial Properties.

This study evaluated an experimental two-step self-etch adhesive (BZF-29, BZF) by comparing it with a reference two-step self-etch adhesive (Clearfil Megabond 2, MB) and a universal adhesive (G-Premio Bond, GP) for microtensile bond strength (µTBS) and resin-dentin interfacial characteristics. Twenty-four human third molars were used for the µTBS test. Bonded peripheral dentin slices were separated to observe the resin-dentin interface and measure the adhesive layer thickness with SEM. µTBS data of the central beams were obtained after 24 h and 6 months of water storage. Fracture modes were determined using a stereomicroscope and SEM. Nine additional third molars were used to determine the elastic modulus (E) employing an ultra microhardness tester. Water storage did not affect µTBS of the tested adhesives (p > 0.05). µTBS of BZF and MB were similar but significantly higher than GP (p < 0.05). BZF achieved the highest adhesive layer thickness, while GP the lowest. E of BZF and MB were comparable but significantly lower than GP (p < 0.05). Except for GP, the predominant fracture mode was nonadhesive. The superior bonding performance of BZF and MB could be attributed to their better mechanical property and increased adhesive thickness imparting better stress relief at the interface.

Effects of remaining dentin thickness, smear layer and aging on the bond strengths of self-etch adhesives to dentin.

This study evaluated the effects of remaining dentin thickness (RDT), different smear layers, and aging on the microtensile bond strength (µTBS) of universal adhesives to dentin when applied in self-etch mode. Ninety-six human third molars were randomly allocated to 12 groups (n=8) based on adhesives: ClearfilTM SE Bond 2 (SE, control), ClearfilTM Universal Bond (CU) and ScotchBondTM Universal Adhesive (SB); smear layers: prepared either with 600-grit SiC paper (P) or regular diamond bur (B); and aging: stored in distilled water at 37ºC for 24 hours (24h) or 1 year (1y). µTBS was significantly affected by the type of adhesives, smear layers, and aging (p<0.001). A statistically significant and positive linear relationship was also observed between µTBS and RDT (p<0.05) in all the tested groups, except for SEB1y and CUB24h (p>0.05). RDT, smear layer types, and aging can influence the bonding performances of universal adhesives when applied in self-etch mode.

Evaluation of shade matching of a novel supra-nano filled esthetic resin composite employing structural color using simplified simulated clinical cavities.

OBJECTIVE: To evaluate the shade matching ability of a novel supra-nano filled esthetic resin composite employing structural color technology using simplified simulated clinical cavities. Filler morphology and light transmittance characteristics were also evaluated. MATERIALS AND METHODS: One-hundred and twenty frames of resin composite were built in A1, A2, A3, and A4 shades to simulate Class I cavities (diameter = 4 mm, height = 2 mm). For each shaded frame, cavities were filled with three different types of filler containing resin composites (n = 10): supra-nano filled (SN filled) resin composite, microhybrid filled (MH filled) resin composite, and clustered-nano filled (CN filled) resin composite. Color parameters were calculated using CIELAB (△Eab ) and CIEDE2000 (△E00 ). Data were analyzed using one-way analysis of variance (ANOVA), followed by Duncan's test (α = .05). Filler morphology and light transmittance characteristics were measured to explore the role of structural color on shade matching. RESULTS: △Eab and △E00 of SN filled resin composite were significantly lower in A2, A3, and A4 shades (P < .05). CONCLUSIONS: The SN filled resin composite showed better shade matching with A2, A3, and A4 shades of resin composite frames compared to MH filled resin composite, and CN filled resin composite. CLINICAL SIGNIFICANCE: Universal-shade resin composites, which were expected to match nearly all shades, simplify the restorative procedure. Resin composite, which contained spherical supra-nano filler particles, could contribute most to its shade matching by stimulating structural color. Structural color technology may provide additional benefits for shade matching of resin composites.