Migration Rules and Mechanisms of Nano-Biochar in Soil Columns under Various Transport Conditions.

Compared to traditional biochar (BC), nano-biochar (NBC) boasts superior physicochemical properties, promising extensive applications in agriculture, ecological environments, and beyond. Due to its strong adsorption and migration properties, NBC may carry nutrients or pollutants to deeper soil layers or even groundwater, causing serious environmental risks. Nevertheless, the migration rules and mechanisms of NBC in soil are still unclear. Therefore, this study employed soil column migration experiments to systematically explore the migration rules and mechanisms of NBC under various flow rates, initial soil water contents, soil depths, and soil textures. The results showed that regulated by smaller particle size differences and greater surface charges, NBC exhibited a stronger migration ability compared with traditional BC. As the soil texture transitioned from fine to coarse, the migration capability of NBC significantly improved, driven by both pore structure and interaction forces as described by the DLVO theory. The migration ability of NBC was also greatly boosted as the soil transitioned from saturated to unsaturated conditions, primarily because of preferential flow. When the flow rate increased from 70% KS to 100% KS and 130% KS, the migration ability of NBC also increased accordingly, as changes in injection flow rates altered the velocity distribution of pore water. NBC in 25 cm soil columns was more prone to shallow retention compared with 10 cm soil columns, resulting in weaker overall migration ability. In addition, through fitting of the two-site kinetic model and related parameters, the penetration curves of NBC under various variable conditions were effectively characterized. These findings could offer valuable insights for NBC's future efficient, rational, and sustainable utilization, facilitating the evaluation and mitigation of its potential environmental risks.

High specific surface area carbon aerogel derived from starch for methylene blue adsorption and supercapacitors.

Starch based carbon aerogel has attracted significant attention due to the wide source, environmental friendliness and low price of raw materials. Here, starch based carbon aerogel was fabricated by graft reaction and cross-linking reaction of starch. The network structure of starch hydrogel was optimized through graft and cross-linking reaction. After freeze drying and high temperature carbonization, the obtained carbon aerogel that carbonized at 800 °C showed a specific surface area of 1508 m2·g-1 without activation which is far higher than that of other unactivated carbon aerogels. The starch based carbon aerogel carbonized at 800 °C exhibited superior methylene blue adsorption ability with a maximum adsorption capacity of 963.5 mg·g-1 as a result of its rich surface functional groups, high specific surface area, and reasonable pore size distribution. Furthermore, the carbon aerogel carbonized at 700 °C exhibited excellent electrochemical performance with a specific capacitance of 180.1 F·g-1 at a current density of 1 A·g-1as electrode materials for supercapacitors. Overall, this work provides a new method to prepare high performance starch based carbon aerogel.

Shaddock peel-derived N-doped carbon quantum dots coupled with ultrathin BiOBr square nanosheets with boosted visible light response for high-efficiency photodegradation of RhB.

In the present work, we constructed a serials of novel shaddock peel-derived N-doped carbon quantum dots (NCQDs) coupled with BiOBr composites. The result showed that the as-synthesized BiOBr (BOB) was composed of ultrathin square nanosheets and flower-like structure, and NCQDs were uniformly dispersed on the surface of BiOBr. Furthermore, the BOB@NCQDs-5 with optimal NCQDs content displayed the top-flight photodegradation efficiency with ca. 99% of removal rate within 20 min under visible light and possessed excellent recyclability and photostability after 5 cycles. The reason was attributed to relatively large BET surface area, the narrow energy gap, inhibited recombination of charge carriers and excellent photoelectrochemical performances. Meanwhile, the improved photodegradation mechanism and possible reaction pathways were also elucidated in detail. On this basis, the study opens a novel perspective to obtain a highly efficient photocatalyst for practical environment remediation.

The variation in crown-root morphology of anterior teeth assessed with cone-beam computed tomography.

OBJECTIVE: To determine the discrepancy of crown-root morphology of anterior teeth, using cone-beam computed tomography (CBCT), and to provide a guidance for proper torque expression. METHODS: A total of eligible 200 CBCT were imported into Invivo v. 5.4 software, to obtain the middle labio-lingual sections of anterior teeth. AutoCAD 2007 software was applied to measure the crown-root angulation (Collum angle) and the angle formed by a tangent to the center of the labial surface and the long axis of the crown (labial surface angle). SPSS 18.0 was used for statistical comparisons of the two measurements, at the level of p< 0.05, and the Pearson correlation analysis was applied to investigate the association between the two measurements. RESULTS: The value of Collum angle in maxillary central incisor was close to 0°. Significantly negative Collum angle in lateral incisors and maxillary canine, and positive value in mandibular canine were detected (p < 0.001). The labial surface angle in canine was significantly greater than the intra-arch incisors (p< 0.001), and no significant difference was detected between the central and lateral incisors (p > 0.05). Notably, there was also a significant positive correlation between the two measurements. CONCLUSIONS: The crown-root angulations were greatly different among anterior teeth. Accompanying the obvious crown-root angulations, the canines both in maxillary and mandibular arches presented considerable labial surface curvatures. Hence, equivalent deviation during bracket bonding might cause greater torque expression error and increase the risk of alveolar fenestration and dehiscence.

Structural engineering of BiOBr nanosheets for boosted photodegradation performance toward rhodamine B.

A series of BiOBr nanosheets were synthesized through a facile solvothermal method, whose structures were adjusted by changing solvent ratios. Their photodegradation properties toward rhodamine B (RhB) were further investigated under visible light irradiation. The photocatalytic results indicated that the B-1:3 sample showed superior photoactivity and the RhB removal efficiency attained 97% within 30 min. The outstanding photodegradation activity can be ascribed to the small particle size and thickness, suppressed e--h+ pair recombination and more active electrons and holes. Moreover, free radical quenching experiments suggest that ·O2 - and h+ play a crucial role in improving photoactivity. This work opens a new avenue to boost the removal rate of organic pollutants by engineering the solvent ratios of photocatalysts in the wastewater treatment field.

Transcription factor Foxp1 is essential for the induction of choroidal neovascularization.

BACKGROUND: The exudative form of age-related macular degeneration (AMD) is characterized by abnormal blood vessel growth, which is stimulated by vascular endothelial growth factor (VEGF) released from retinal pigment epithelium (RPE). The angiogenic behaviors of vascular endothelial cells in vitro depend on forkhead box protein P1 (Foxp1), a transcription repressor widely expressed in human and murine tissues during development. In this study, we aimed to determine whether loss of Foxp1 affects laser-induced choroidal neovascularization (CNV) in mouse. METHODS: Eye-selective deletion of Foxp1 was obtained by crossing Foxp1flox/flox with Six3-Cre mice. Laser photocoagulation was delivered to six- to eight-week-old mice to induce CNV. The expression of Foxp1 and Cre was determined by immunofluorescence in cryostat sections of the eyes. Fundus fluorescein angiography (FFA), optical coherence tomography (OCT), and B4 isolectin staining were applied to analyze the leakage, bulge height, and area of CNV lesions, respectively. RPE-choroid tissues were isolated for the determination of VEGF and pigment epithelium derived factor (PEDF) by Western blotting. RESULTS: Foxp1 was expressed in retinal ganglion cells, RPE, and the choroidal endothelial cells. Laser photocoagulation increased the number of Foxp1+-endothelial cells and induced CNV. Six3-Cre reduced Foxp1 expression in RPE but not the endothelium, leading to a lower level of VEGF in the RPE-choroid. Foxp1 knockout inhibited pathological angiogenesis and vascular leakage of the laser-induced CNV lesions. CONCLUSIONS: Foxp1 regulates the expression of VEGF in the RPE, and inhibition of Foxp1 could potentially be a novel strategy for the prevention and therapy of neovascularization related to AMD.

The variation in crown-root morphology of anterior teeth assessed with cone-beam computed tomography

ABSTRACT Objective: To determine the discrepancy of crown-root morphology of anterior teeth, using cone-beam computed tomography (CBCT), and to provide a guidance for proper torque expression. Methods: A total of eligible 200 CBCT were imported into Invivo v. 5.4 software, to obtain the middle labio-lingual sections of anterior teeth. AutoCAD 2007 software was applied to measure the crown-root angulation (Collum angle) and the angle formed by a tangent to the center of the labial surface and the long axis of the crown (labial surface angle). SPSS 18.0 was used for statistical comparisons of the two measurements, at the level of p< 0.05, and the Pearson correlation analysis was applied to investigate the association between the two measurements. Results: The value of Collum angle in maxillary central incisor was close to 0°. Significantly negative Collum angle in lateral incisors and maxillary canine, and positive value in mandibular canine were detected (p < 0.001). The labial surface angle in canine was significantly greater than the intra-arch incisors (p< 0.001), and no significant difference was detected between the central and lateral incisors (p > 0.05). Notably, there was also a significant positive correlation between the two measurements. Conclusions: The crown-root angulations were greatly different among anterior teeth. Accompanying the obvious crown-root angulations, the canines both in maxillary and mandibular arches presented considerable labial surface curvatures. Hence, equivalent deviation during bracket bonding might cause greater torque expression error and increase the risk of alveolar fenestration and dehiscence.

RESUMO Objetivo: Determinar a discrepância na morfologia coroa-raiz de dentes anteriores, utilizando tomografia computadorizada de feixe cônico (TCFC), e fornecer parâmetros para a expressão apropriada do torque. Método: No total, 200 tomografias elegíveis foram importadas para o software Invivo 5.4 para obtenção das secções médias vestibulolinguais dos dentes anteriores. Osoftware AutoCAD 2007 foi usado para medir a angulação coroa-raiz (ângulo Collum) e o ângulo formado por uma tangente ao centro da superfície vestibular da coroa e o longo eixo da coroa (ângulo da superfície vestibular). O software SPSS 18.0 foi utilizado para as comparações estatísticas das duas medições, com nível de significância de p< 0,05, e a análise de correlação de Pearson foi aplicada para investigar a associação entre as duas medições. Resultados: O valor do ângulo Collum do incisivo central superior foi próximo a 0°. Foram detectados valores significativamente negativos para o ângulo Collum nos incisivos laterais e caninos superiores, mas valores positivos nos caninos inferiores (p< 0,001). O ângulo da superfície vestibular no canino foi significativamente maior do que nos incisivos intra-arcada (p< 0,001), e nenhuma diferença significativa foi detectada entre incisivos centrais e laterais (p> 0,05). Também foi observada uma correlação positiva significativa entre as duas medições. Conclusões: As angulações coroa-raiz foram muito diferentes entre os dentes anteriores. Os caninos superiores e inferiores apresentaram considerável curvatura na superfície vestibular, associada a uma evidente angulação coroa-raiz. Consequentemente, desvios durante a colagem de braquetes podem desencadear maior erro na expressão de torque e aumentar o risco de fenestração alveolar e deiscência, sendo necessária uma avaliação antes da colagem.

Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature.

This study investigates the very-high-cycle fatigue (VHCF) behavior at elevated temperature (650 °C) of the Inconel 718 alloy fabricated by selective laser melting (SLM). The results are compared with those of the wrought alloy. Large columnar grain with a cellular structure in the grain interior and Laves/δ phases precipitated along the grain boundaries were exhibited in the SLM alloy, while fine equiaxed grains were present in the wrought alloy. The elevated temperature had a minor effect on the fatigue resistance in the regime below 108 cycles for the SLM alloy but significantly reduced the fatigue strength in the VHCF regime above 108 cycles. Both the SLM and wrought specimens exhibited similar fatigue resistance in the fatigue life regime of fewer than 107-108 cycles at elevated temperature, and the surface initiation mechanism was dominant in both alloys. In a VHCF regime above 107-108 cycles at elevated temperature, the wrought material exhibited slightly better fatigue resistance than the SLM alloy. All fatigue cracks are initiated from the internal defects or the microstructure discontinuities. The precipitation of Laves and δ phases is examined after fatigue tests at high temperatures, and the effect of microstructure on the formation and the propagation of the microstructural small cracks is also discussed.

Inhibition of Sar1b, the Gene Implicated in Chylomicron Retention Disease, Impairs Migration and Morphogenesis of Developing Cortical Neurons.

Chylomicron Retention Disease (CMRD) is a rare inherited lipid malabsorption syndrome that exhibits a recessive hypocholesterolemia in infants. CMRD has been associated with genetic mutations of SAR1B-a member of the Arf GTPase family involved in the secretory pathway from the endoplasmic reticulum to the Golgi. CMRD patients suffer from multiple neurological deficits, the etiologies of which remain unclear. In this study, we found that Sar1b protein is expressed in developing mouse neocortex. The knockdown of Sar1b does not affect the proliferation and mitotic exit of the neural progenitors but inhibits the radial migration of the newborn cortical neurons. At postnatal day 3, the neurons stalled in the white matter fail to develop axons across the midline of the corpus callosum, resulting in the loss of the neurons later on. hSAR1B(D137N), a CMRD-associated mutant of SAR1B, also impairs the positioning of the cortical neurons in the mouse brain, suggesting a dominant-negative effect by the human heterozygous mutant. The results indicate that SAR1B is crucial to radial migration and axon morphogenesis of the cortical neurons. Our study reveals a cell-autonomous action of Sar1b, which is unrelated to lipid absorption from the gut, on the development of the cerebral cortex.

Synthesis and Application of a Phosphorous-Free and Non-Nitrogen Polymer as an Environmentally Friendly Scale Inhibition and Dispersion Agent in Simulated Cooling Water Systems.

A novel phosphorus-free and non-nitrogen scale inhibition and dispersion agent was synthesized from epoxysuccinic acid (ESA), itaconic acid (IA), and sodium methyl propylene sulfonate (SMAS). It was characterized by infrared spectroscopy (IR), nuclear magnetic resonance (NMR), and elemental analysis, and its molecular weight and distribution were determined by gel permeation chromatography (GPC). Static experimental methods were used to evaluate the scale inhibition against CaCO3, Ca3(PO4)2, and CaSO4. The dispersion ability was evaluated by measuring the dispersive property of iron oxide. By observing the morphology of the CaCO3 scale, the scale inhibition mechanism was discussed. The results showed that when the ratio of raw materials (ESA/IA/SMAS) was 10:10:5, the scale inhibition rate of CaCO3 and CaSO4 reached 100% with the dosages of 20 and 10 mg/L, respectively. In addition, the scale inhibition rate against Ca3(PO4)2 was up to 96.64% with a dosage of 100 mg/L. The property of dispersing iron oxide exhibited the best results with 50 mg/L of the agent. On the 21st day, the biodegradation rate reached 63.33%. This polymer was an environmentally friendly antiscale and dispersant with good scale inhibition and biodegradability.

Inhibition of Autism-Related Crm1 Disrupts Mitosis and Induces Apoptosis of the Cortical Neural Progenitors.

De novo microdeletion of chromosome 2p15-16.1 presents clinically recognizable phenotypes that include mental retardation, autism, and microcephaly. Chromosomal maintenance 1 (CRM1) is a gene commonly missing in patients with 2p15-16.1 microdeletion and one of two genes found in the smallest deletion case. In this study, we investigate the role and mechanism of Crm1 in the developing mouse brain by inhibiting the protein or knocking down the gene in vivo. Inhibition of Crm1 reduces the proliferation and increases p53-dependent apoptosis of the cortical neural progenitors, thereby impeding the growth of embryonic cerebral cortex. Live imaging of mitosis in ex vivo embryonic brain slices reveals that inhibition of CRM1 arrests the cortical progenitors at metaphase. The arrested cells eventually slip into a pseudo-G1 phase without chromosome segregation. The mitotic slippage cells are marked by persistent expression of the spindle assembly checkpoint (SAC), repressing of which rescues the cells from apoptosis. Our study reveals that activating the SAC and inducing the mitotic slippage may lead to apoptosis of the cortical neural progenitors. The resulting cell death may well contribute to microcephaly associated with microdeletion of chromosome 2p15-16.1 involving CRM1.