Interconnected Three-Dimensional Porous Alginate-Based Gel Electrolytes for Lithium Metal Batteries.

Lithium batteries have been widely used in our daily lives for their high energy density and long-term stability. However, their safety problems are of paramount concern for consumers, which restricts their scale applications. Gel polymer electrolytes (GPEs) compensate for the defects of liquid leakage and lower ionic conductivity of solid electrolytes, which have attracted a lot of attention. Herein, a 3D interconnected highly porous structural gel electrolyte was prepared with alginate dressing as a host material, poly(ethylene oxide) (PEO), and a commercial liquid electrolyte. With rich polar functional groups and (CH2-CH2-O) segments on the polymer matrix, the transportation of Li+ is faster and uniform; thus, the formations of lithium dendrite were significantly inhibited. The cycle stability of symmetrical Li||Li batteries with modified composite electrolytes (SAA) is greatly improved, and the overpotential remains stable after more than 1000 h. Meanwhile, under the same conditions, the cycle performance of batteries with unmodified electrolytes is inferior and overpotentials are nearly 1 V after 100 h. Additionally, the capacity retention of Li||LiFePO4 with SAA is more than 95% after 200 cycles, while those of the others declined sharply. The alginate dressing-based GPEs can greatly enhance the mechanical and thermal stability of PEO-based GPEs, which provides an environmentally friendly avenue for gel electrolytes' applications in lithium batteries.

Thermodynamic modelling of solubility and preferential solvation for ribavirin (II) in co-solvent mixtures of (methanol, n-propanol, acetonitrile or 1,4-dioxane) + water.

The equilibrium solubility of ribavirin in solvent mixtures of {methanol (1) + water (2)}, {n-propanol (1) + water (2)}, {acetonitrile (1) + water (2)} and {1,4-dioxane (1) + water (2)} was determined experimentally by using isothermal dissolution equilibrium method within the temperature range from (278.15 to 318.15) K under atmospheric pressure (101.1 kPa). At the same temperature and mass fraction of methanol (n-propanol, acetonitrile or 1,4-dioxane), the mole fraction solubility of ribavirin is greater in (methanol + water) than in the other three solvent mixtures. The preferential solvation parameters were derived from their thermodynamic solution properties by means of the inverse Kirkwood-Buff integrals. The preferential solvation parameters for methanol, n-propanol, acetonitrile or 1,4-dioxane (δx 1,3) were negative in the four solvent mixtures with a very wide compositions, which indicated that ribavirin was preferentially solvated by water. Temperature had little effect on the preferential solvation magnitudes. The higher solvation by water could be explained in terms of the higher acidic behaviour of water interacting with the Lewis basic groups of the ribavirin. Besides, the solubility of the drugs was mathematically represented by using the Jouyban-Acree model, van't Hoff-Jouyban-Acree model and Apelblat-Jouyban-Acree model obtaining average relative deviations lower than 1.57% for correlative studies. It is noteworthy that the solubility data presented in this work contribute to expansion of the physicochemical information about the solubility of drugs in binary solvent mixtures and also allows the thermodynamic analysis of the respective dissolution and specific solvation process.