Revisiting the thermal decomposition mechanism of MAPbI3.

The thermal stability of MAPbI3 poses a challenge for the industry. To overcome this limitation, a thorough investigation of MAPbI3 is necessary. In this work, thermal gravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy were conducted to identify the thermal decomposition products of MAPbI3, which were found to be CH3I, NH3, and PbI2. In situ X-ray diffraction (XRD) measurements were then performed in the temperature range from 300 to 700 K, which revealed the significant decomposition of the (110), (220), and (310) surfaces of MAPbI3 between 550 and 600 K. Density functional theory (DFT) calculations demonstrated that the (220) surface exhibited the highest stability. Additionally, the transition states of thermal decomposition showed that the energy barrier for the decomposition of the (110) surface was 2.07 eV. Our combined experimental and theoretical results provide a better understanding of the thermal decomposition mechanism of MAPbI3, providing valuable theoretical support for the design of long-term stable devices.

Alkaline-assisted screw press pretreatment affecting enzymatic hydrolysis of wheat straw.

Screw press processing of biomass can be considered as a suitable mechanically based pretreatment for biofuel production since it disrupts the structure of lignocellulosic biomass with high shear and pressure forces. The combination with chemical treatment has been suggested to increase the conversion of lignocellulosic biomass to fermentable sugars. Within the study, the synergetic effect of alkaline (sodium hydroxide, NaOH) soaking and screw press pretreatment on wheat straw was evaluated based on, e.g., sugar recovery and energy efficiency. After alkaline soaking (at 0.1 M for 30 min) and sequential screw press pretreatment with various screw press configurations and modified screw barrel, the lignin content of pretreated wheat straw was quantified. In addition, the structure of pretreated wheat straw was investigated by scanning electron microscopy and measurement of specific surface area. It could be shown that removal of lignin is more important than increase of surface area of the biomass to reach a high sugar recovery. The rate constant of the enzymatic hydrolysis increased from 1.1 × 10-3 1/h for the non-treated material over 2.3 × 10-3 1/h for the alkaline-soaked material to 26.9 × 10-3 1/h for alkaline-assisted screw press pretreated material, indicating a nearly 25-fold improvement of the digestibility by the combined chemo-mechanical pretreatment. Finally, the screw configuration was found to be an important factor for improving the sugar recovery and for reducing the specific energy consumption of the screw press pretreatment.