Controlling Interfacial Ion-Transport Kinetics Using Polyelectrolyte Membranes for Additive- and Effluent-free, High-Performance Electrodeposition.

The development of high-performance, environmentally friendly electrodeposition processes is critical for emerging coating technologies because current technologies use highly complex baths containing metal salts, supporting electrolytes, and various kinds of organic additives, which are problematic from both environmental and cost perspectives. Here, we show that a 200 µm-thin polyelectrolyte membrane sandwiched between electrodes effectively concentrates metal ions through interfacial penetration, which increases the conductance between the electrodes to 0.30 S and realizes solid-state electrodeposition that produces no mist, sludge, or even waste effluent. Both, experimental results and theoretical calculations, reveal that electrodeposition is controlled by ion penetration at the solution/polyelectrolyte interface, providing an intrinsically different ion-transport mechanism to that of conventional diffusion-controlled electrodeposition. The setup, which includes 0.50 mol L-1 copper sulfate and no additives, delivers a maximum current density of 300 mA cm-2, which is nearly fivefold higher than that of a current commercial plating bath containing organic additives.

Fabrication of silver patterns on polyimide films based on solid-phase electrochemical constructive lithography using ion-exchangeable precursor layers.

We report a fully additive-based electrochemical approach to the site-selective deposition of silver on a polyimide substrate. Using a cathode coated with ion-doped precursor polyimide layers, patterns of metal masks used as anodes were successfully reproduced at the cathode-precursor interface through electrochemical and ion-exchange reactions, which resulted in the generation of silver patterns on the polyimide films after subsequent annealing and removal from the substrate. Excellent interfacial adhesion was achieved through metal nanostructures consisting of interconnecting silver nanoparticles at the metal-polymer interface, which are electrochemically grown "in" the precursor layer. This approach is a resist- and etch-free process and thus provides an effective methodology toward lower-cost and high-throughput microfabrication.

Preparations of polystyrene/aluminum hydroxide and polystyrene/alumina composite particles in an ionic liquid.

Polystyrene (PS)/aluminum hydroxide (Al(OH)(3)) composite particles were successfully prepared by the sol-gel process of aluminum isopropoxide (Al(OPr(i))(3)) in a hydrophilic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]) using ammonium hydroxide (NH(4)OH) as a catalyst in the presence of PS seed. Transmission electron microscopy observation of ultrathin cross-sections of the composite particles revealed that the composite particles had a core-shell morphology consisting of a PS core and a Al(OH)(3) shell having high crystallinity. The amount of secondary nucleated Al(OH)(3) could be reduced by dropwise addition of NH(4)OH. Moreover, PS/η-Al(2)O(3) composite particles were successfully prepared by heat treatment of PS/Al(OH)(3) at 300 °C in N(2) atmosphere, which is below the decomposition temperature of PS.

Relationship between body temperature and ovarian cycle in Asian and African elephants.

The aim of the present study was to investigate whether changes in body temperature are related to the ovarian cycle in elephants. Rectal, tongue or fecal temperature was measured for 2 Asian and 5 African elephants using an electric thermometer. Evaluation of ovarian cycles was based on the changes in serum or fecal progestin. The mean +/- SD values of the rectal, tongue, and fecal temperatures were 36.3 +/- 0.3 (2 Asian), 36.2 +/- 0.5 (1 African) and 36.5 +/- 0.3 C (4 African), respectively; the fecal temperature was the highest of the 3 temperatures (P<0.01). The longitudinal changes in body temperatures correlated with the ovarian cycle, with higher temperatures occurring during the luteal phase. The fecal temperatures of one acyclic African elephant did not change cyclically. These results suggest that measurement of body temperature can be used to easily evaluate the ovarian cyclicity of an individual animal, although it might not be able to determine the ovarian cycle length.

Direct patterning of copper on polyimide using ion exchangeable surface templates generated by site-selective surface modification.

We demonstrate site-selective chemical surface modification by dispensing potassium hydroxide solution onto polyimide, which confines source metallic ions that can subsequently be used in resist- and mask-free fabrication of copper circuit patterns. Metallization can be achieved by a wet chemical method, providing control over metal/polymer interfacial structures. Because the approach is compatible with other existing printing technologies and much simpler than conventional lithography-based methods, we propose that the present surface template method may be of general application in fabrication of metallized polymers as well as in development of integrated circuits with a variety of electronic circuit elements.