Advanced Ag nanoparticles for the catalyzation of glyoxylic acid oxidation in through-holes electroless copper metallization.

Advanced Ag nanoparticles (Ag NPs) were prepared by wet chemical oxidation-reduction method, using mainly the tannic acid as reducing agent and carboxymethylcellulose sodium as stabilizer. The prepared Ag NPs uniformly disperse and are stable for more than one month without agglomeration. The studies of transmission electron microscopy (TEM) and ultraviolet-visible (UV-vis) absorption spectroscopy indicate that the Ag NPs are in homogeneous sphere with only 4.4 nm average size and narrow particle size distribution. Electrochemical measurements reveal that the Ag NPs behave excellent catalytic activity for electroless copper plating using glyoxylic acid as reducing agent. In situ fourier transform infrared (in situ FTIR) spectroscopic analysis combined with density functional theory (DFT) calculation illustrate that the molecular oxidation of glyoxylic acid catalyzed by Ag NPs is as the following routes: glyoxylic acid molecule first is adsorbed on Ag atoms with carboxyl oxygen terminal, then hydrolyzed to diol anionic intermediate, and last oxidized to oxalic acid. Time-resolved in situ FTIR spectroscopy further reveals the real-time reactions of electroless copper plating as follows: glyoxylic acid is continuously oxidized to oxalic acid and releases electrons at the active catalyzing spots of Ag NPs, and Cu(II) coordination ions are in situ reduced by the electrons. Based on the excellent catalytic activity, the advanced Ag NPs can replace the expensive Pd colloids catalyst and successfully apply in through-holes metallization of printed circuit board (PCB) by electroless copper plating.

Suppressing Sulfite Dimerization at a Polarized Gold Electrode/Water Solution Interface for High-Quality Gold Electrodeposition.

Solid/liquid interfacial structure occupies great importance in chemistry, biology, and materials. In this paper, by combining EC-SERS study and DFT calculation, we reveal the adsorption and dimerization of sulfite (SO32-) at a gold electrode/water solution interface, and establish an adsorption displacement strategy to suppress the dimerization of sulfite. At the gold electrode/sodium sulfite solution interface, at least two layers of SO32- anions are adsorbed on the electrode surface. As the applied potential shifts negatively, the adsorption strength of the first SO32- layer is weakened gradually and then is dimerized with the second orientated SO32- layer to form S2O52-, and S2O52- is further reduced to S2O32-. After hydroxyethylene disphosphonic acid (HEDP) is introduced to the gold electrode/sodium sulfite solution interface, the second oriented SO32- layer is replaced by a HEDP coadsorption layer. This results in the first layer of SO32- being desorbed directly without any structural transformation or chemical reaction as the potential shifts negatively. The suppression of sulfite dimerization by HEDP is more clear at the gold electrode/gold sulfite solution interface owing to the electroreduction of gold ions. Furthermore, the electrochemical studies and electrodeposition experiments show that as the sulfite dimerization reaction is suppressed, the electroreduction of gold ions is accelerated, and the deposited gold coating is bright and dense with finer grains.

Illuminating nanostructured gold electrode: surface plasmons or electron ejection?

Recently, the photoelectric effect in metals in electrolyte environments has aroused the interest of researchers. However, direct evidence for surface plasmons-enhanced electrochemical reactions involving classic outer-sphere reactions of reversible redox couples is seldom reported. We used a surface plasmons-active gold-mushroom-array as a working electrode and observed enhanced faradaic current from ferrocenemethanol following illumination with a xenon lamp. The photoelectric current behaved differently in the presence and absence of oxygen in the solution. The preliminary results are discussed with consideration of the possible mechanisms of electron transfer, although they are very complex, due to the lack of direct evidence. Some consideration was also taken of the research on photoelectrochemical reactions on metallic electrodes.

Rational fabrication of silver-coated AFM TERS tips with a high enhancement and long lifetime.

Tip-enhanced Raman spectroscopy (TERS), known as nanospectroscopy, has received increasing interest as it can provide nanometer spatial resolution and chemical fingerprint information of samples simultaneously. Since Ag tips are well accepted to show a higher TERS enhancement than that of gold tips, there is an urgent quest for Ag TERS tips with a high enhancement, long lifetime, and high reproducibility, especially for atomic force microscopy (AFM)-based TERS. Herein, we developed an electrodeposition method to fabricate Ag-coated AFM TERS tips in a highly controllable and reproducible way. We investigated the influence of the electrodeposition potential and time on the morphology and radius of the tip. The radii of Ag-coated AFM tips can be rationally controlled at a few to hundreds nanometers, which allows us to systematically study the dependence of the TERS enhancement on the tip radius. The Ag-coated AFM tips show the highest TERS enhancement under 632.8 nm laser excitation and a broad localized surface plasmon resonance (LSPR) response when coupled to a Au substrate. The tips exhibit a lifetime of 13 days, which is particularly important for applications that need a long measuring time.

Competing Mechanisms in the Acetaldehyde Functionalization of Positively Charged Hydrogenated Silicene.

Density functional theory calculations were used to elucidate the mechanism of the addition reaction of acetaldehyde to positively charged hydrogenated silicene (H-silicene). We found that the positively charged H-silicene plane could be partially restructured to form a vacant Si site, which enabled an additional nucleophilic addition reaction. After attachment of the acetaldehyde molecule to the H-silicene plane, two competing pathways were found to be involved in the hydrogen-abstraction process: a random-reaction mechanism and a chain-reaction mechanism. The theoretical results provided detailed information about stable structures and thermodynamic parameters of the reaction pathways, such as equilibrium geometries, Gibbs free energies, and the evolution of the spin densities and atomic charges. Our results reveal that the existence of a positive charge can significantly activate the grafting of unsaturated species on hydrogenated silicene, even if no silicon dangling bond is created proactively. The simulated Raman spectra of the two products were analyzed to elucidate the features of the competing mechanisms.

Rational fabrication of a gold-coated AFM TERS tip by pulsed electrodeposition.

Reproducible fabrication of sharp gold- or silver-coated tips has become the bottleneck issue in tip-enhanced Raman spectroscopy, especially for atomic force microscopy (AFM)-based TERS. Herein, we developed a novel method based on pulsed electrodeposition to coat a thin gold layer over atomic force microscopy (AFM) tips to produce plasmonic TERS tips with high reproducibility. We systematically investigated the influence of the deposition potential and step time on the surface roughness and sharpness. This method allows the rational control of the radii of gold-coated TERS tips from a few to hundreds of nanometers, which allows us to systematically study the dependence of the TERS enhancement on the radius of the gold-coated AFM tip. The maximum TERS enhancement was achieved for the tip radius in the range of 60-75 nm in the gap mode. The coated gold layer has a strong adhesion with the silicon tip surface, which is highly stable in water, showing the great potential for application in the aqueous environment.

White-light induced grafting of 3-MPA on the Si(111)-H surface for catalyzing Au nanoparticles' in situ growth.

A novel, mild and effective method was designed for grafting of high-quality organic monolayers on a silicon surface to catalyze nanoparticles' growth. By using a white-light source, 3-mercaptopropionic acid (3-MPA) molecules were attached to hydrogen-terminated Si(111) surfaces at room temperature. The attached monolayers were characterized using X-ray photoelectron spectroscopy to provide detailed information. The in situ growth of Au nanoparticles (AuNPs) with dimensions below 20 nm was catalyzed on a silicon surface with highly uniform and compact structure morphology. The AuNPs can grow selectively in a certain region on a patterned Si-Si3N4 chip. p-Nitrothiophenol (p-NTP) was used as the probe to evaluate the SERS enhancement of the highly uniform and compact AuNP-Si substrate. In order to better understand the white light initiation of the addition reaction of 3-MPA on the Si(111)-H surface, the mechanism was elucidated by density functional theoretical (DFT) calculations, which indicated that the formation of the Si-O bond occurred at the PEC of the first singlet excited state (S1) with a very low activation barrier about 30% of the ground state (S0) value.

Conductance histogram evolution of an EC-MCBJ fabricated Au atomic point contact.

This work presents a study of Au conductance quantization based on a combined electrochemical deposition and mechanically controllable break junction (MCBJ) method. We describe the microfabrication process and discuss improved features of our microchip structure compared to the previous one. The improved structure prolongs the available life of the microchip and also increases the success rate of the MCBJ experiment. Stepwise changes in the current were observed at the last stage of atomic point contact breakdown and conductance histograms were constructed. The evolution of 1G0 peak height in conductance histograms was used to investigate the probability of formation of an atomic point contact. It has been shown that the success rate in forming an atomic point contact can be improved by decreasing the stretching speed and the degree that the two electrodes are brought into contact. The repeated breakdown and formation over thousands of cycles led to a distinctive increase of 1G0 peak height in the conductance histograms, and this increased probability of forming a single atomic point contact is discussed.

A density functional theory approach to mushroom-like platinum clusters on palladium-shell over Au core nanoparticles for high electrocatalytic activity.

Recently, it was found that Pt clusters deposited on Pd shell over Au core nanoparticles (Au@Pd@Pt NPs) exhibit unusually high electrocatalytic activity for the electro-oxidation of formic acid (P. P. Fang, S. Duan, et al., Chem. Sci., 2011, 2, 531-539). In an attempt to offer an explanation, we used here carbon monoxide (CO) as probed molecules, and applied density functional theory (DFT) to simulate the surface Raman spectra of CO at this core-shell-cluster NPs with a two monolayer thickness of Pd shell and various Pt cluster coverage. Our DFT results show that the calculated Pt coverage dependent spectra fit the experimental ones well only if the Pt clusters adopt a mushroom-like structure, while currently the island-like structure is the widely accepted model, which follows the Volmer-Weber growth mode. This result infers that there should be a new growth mode, i.e., the mushroom growth mode as proposed in the present work, for Au@Pd@Pt NPs. We suggest that such a mushroom-like structure may offer novel active sites, which accounts for the observed high electrocatalytic activity of Au@Pd@Pt NPs.

Electrochemically assisted fabrication of metal atomic wires and molecular junctions by MCBJ and STM-BJ methods.

Atomic wires (point contacts) and molecular junctions are two fundamental units in the fields of nanoelectronics and devices. This Minireview introduces our recent approaches aiming to develop versatile methods to fabricate and characterize these unique metallic and molecular structures reliably. Electrochemical methods are coupled with mechanically controllable break junction (EC-MCBJ) or scanning tunneling microscopy (STM) break junction (EC-STMBJ) methods to fabricate metallic point contacts and metal/molecule/metal junctions. With the designed electrodeposition method, the metal of interest (e.g. Au, Cu, Fe or Pd) is deposited in a controlled way on the original electrode pair, on a chip for MCBJ or on the STM tip, to make the metallic contact. Then, various metal atomic wires and molecular junctions can be fabricated and characterized systematically. Herein, we measured the quantized conductance through the construction of histograms of these metal atomic point contacts and of single molecules including benzene-1,4-dithiol (BDT), ferrocene-bisvinylphenylmethyl dithiol (Fc-VPM), 4,4'-bipyridine (BPY), 1,2-di(pyridin-4-yl)ethene (BPY-EE), and 1,2-di(pyridin-4-yl)ethane (BPY-EA). Finally, we briefly discussed the future of EC-MCBJ and EC-STM for nanoelectronics and devices, for example, for the formation of heterogeneous metal-based atomic point contacts and molecular junctions.