End-to-end learning strategy based on a frequency domain feature decoupling network emulator with joint probabilistic shaping and equalization for a 300-Gbit/s OAM mode division multiplexing transmission.

Mode coupling and device nonlinear impairment appear to be a long-standing challenge in the orbital angular momentum (OAM) mode division multiplexing (MDM) of intensity modulation direct detection (IM/DD) transmission systems. In this paper, we propose an end-to-end (E2E) learning strategy based on a frequency domain feature decoupling network (FDFDnet) emulator with joint probabilistic shaping (PS) and equalization for an OAM-MDM IM/DD transmission with three modes. Our FDFDnet emulator can accurately build a complex nonlinear model of an OAM-MDM system by separating the signal into features from different frequency domains. Furthermore, a FDFDnet-based E2E strategy for joint PS and equalization is presented with the aim of compensating the signal impairment for the OAM-MDM IM/DD system. An experiment is carried out on a 300 Gbit/s carrierless amplitude phase-32 (CAP-32) signal with three OAM modes over a 10 km ring-core fiber transmission, and the results show that the proposed FDFDnet emulator outperforms the traditional CGAN emulator, with improvements in the modelling accuracy of 30.8%, 26.3% and 31% for the three OAM modes. Moreover, the receiver sensitivity of the proposed E2E learning strategy is higher than for the CGAN emulator by 3, 2.5, 2.2 dBm and the real channel by 5.5, 5.1, and 5.3 dBm for the three OAM modes, respectively. Our experimental results demonstrate that the proposed FDFDnet emulator-based E2E learning strategy is a promising contender for achieving ultra-high-capacity interconnectivity between data centers.

Multimode interference methane sensor based on a ZIF-8/PDMS composite film.

A multimode interference methane sensor based on a ZIF-8/PDMS composite film is proposed. The sensing principle is that the refractive index of the ZIF-8/PDMS composite film changes when it adsorbs methane, leading to a measurable optical path difference during the coupling of the cladding higher-order modes and the fundamental mode in the multimode interference fiber (MMI). The environmental methane concentration is then detectable by detecting the wavelength shifts of the interference peaks in the resulted spectrum. Through simulations and experiments aimed at enhancing sensor sensitivity, we optimized three parameters within the sensor structure: the length of the Tapered Single-Mode Fiber (TSMF), the composite film thickness, and the TSMF taper diameter. The experimental results indicate that the sensor's sensitivity reaches a maximum of 0.231 nm%-1. Additionally, the sensor exhibits excellent structural stability and measurement repeatability. The response time is as short as 40 s, and the recovery time ranges between 3 and 5 min. The proposed multimode interferometric methane sensor based on the ZIF-8/PDMS composite film has great potential to support highly sensitive methane concentration detection in many applications.

Highly Sensitive Biomimetic Crack Pressure Sensor with Selective Frequency Response.

High-sensitivity sensors in practical applications face the issue of environmental noise interference, requiring additional noise reduction circuits or filtering algorithms to improve the signal-to-noise ratio (SNR). To address this issue, this study proposes a biomimetic crack pressure sensor with selective frequency response based on hydrogel dampers. The core of this research is to construct a biomimetic crack pressure sensor with selective frequency response using the high-pass filtering characteristics of gelatin-chitosan hydrogels. This design, inspired by the slit sensilla and stratum corneum structure of spider legs, delves into the material properties and principles of hydrogel dampers, exploring their application in biomimetic crack pressure sensors, including parameter selection, structural design, and performance optimization. By delving into the nuanced characteristics and working principles of hydrogel dampers, their integration in biomimetic crack pressure sensors is examined, focusing on aspects like parameter selection, structural engineering, and performance enhancement to selectively sieve out low-frequency noise and transmit target vibrational signals. Experimental results demonstrate that this innovative sensor, while suppressing low-frequency vibration signals, can selectively detect high-frequency signals with high sensitivity. At different vibration frequencies, the relative change in resistance exceeds 200%, and the sensor sensitivity is 7 × 104 kPa-1. Furthermore, this sensor was applied to human voice detection, and the corresponding results verified its frequency-selective performance evidently. This study not only proposes a new design for pressure sensors but also offers fresh insights into the application of biomimetic crack pressure sensors in intricate environments.

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement.

We propose an air gap fiber Bragg grating (g-FBG) sensor that can measure strain and temperature simultaneously. The sensor is made by aligning two fiber Bragg gratings (FBGs), and an air gap exists between these two sub-gratings. This sensor's architecture allows it to form a spectrum with phase-shifted fiber Bragg grating (PSFBG) spectroscopy and Fabry-Perot interference (FPI) spectroscopy. Since the sensitivity of PSFBG and FPI spectra is different for strain and temperature, it is possible to measure both strain and temperature by measuring one of the reflected dips of PSFBG and the interference dip of FPI. The experimental results show that the strain sensitivity is about 11.95 pm/µÎµ via the dip wavelength detection of FPI, and the temperature sensitivity is about 9.64 pm/°C via the dip wavelength detection of PSFBG. The g-FBG sensor demonstrates a resolution of approximately ±3.7 µÎµ within the strain range of 0 to 1000 µÎµ and about ±0.6 °C within the temperature range of 25 °C to 120 °C. The proposed g-FBG sensor, characterized by its simple structure, compact size, and cost-effectiveness, exhibits significant potential in the field of multi-parameter measurements.

Sensitivity-enhanced optical pressure sensor based on MoS2.

A sensitivity-enhanced optical pressure sensor based on molybdenum disulfide (MoS2) is proposed. The sensing principle is that the pressure causes the deformation of the polydimethylsiloxane (PDMS) pressure structure above the MoS2 film, leading to the change of the ambient refractive index, so that a measurable light propagation difference in the waveguide under the film is created to reflect the micro changes of the pressure. The pressure is finally numerically converted to the wavelength shift of the interference peak of the obtained spectrum. The process is simulated and analyzed using MoS2 dielectric film, in contrast with that using graphene dielectric film. It turns out that under same conditions, the MoS2 film has a more distinct modulation effect on light than that of the graphene film. Experiments using the real sensor prototype are carried out and the results show that the pressure measuring sensitivity is improved to 96.02 nm/kPa in the pressure range of 0-0.6 kPa, which is much higher than the typical optical pressure sensors. The proposed optical pressure sensor based on MoS2 is of high potential to support ultra-sensitive pressure detection in many applications.

Boosting visible light photocatalysis in BiOI/BaFe12O19 magnetic heterojunction.

Many previous studies have underestimated the role of magnetic components in improving photocatalytic performance. It is significance to explore the migration mechanism of photoinduced carriers in magnetic heterojunction. Here, a magnetic heterojunction, BiOI/BaFe12O19, was synthesized by a simple preparation method. The optimal synthesis conditions and photocatalytic reaction conditions were explored. The growth mechanism of bismuth iodide oxide (BiOI) was elaborated by introducing a micromagnetic field stemming from barium ferrite (BaFe12O19). The electrochemical impedance spectroscopy (EIS), Mott-Schottky curve (MS), transient fluorescence spectrometer (PL), and photocurrent response plot (i ~ t) tests indicated that the BiOI/BaFe12O19 possessed a higher transfer capacity of electrons, higher separation efficiency of photoinduced carriers, stronger photocurrent response, and higher carriers density, compared with pure BiOI. The ultraviolet-visible diffuse reflectance spectrophotometer (UV-vis DRS), electron paramagnetic resonance spectrometer (EPR), MS, and quenching experiments revealed band structure configuration and migration mechanism of photoinduced carriers. The enhancement mechanism of photocatalysis and photocatalytic reaction mechanism was clearly proclaimed in BiOI/BaFe12O19 catalytic system.

Essential role of MESP1-RING1A complex in cardiac differentiation.

Heart development is controlled by a complex transcriptional network composed of transcription factors and epigenetic regulators. Mutations in key developmental transcription factor MESP1 and chromatin factors, such as PRC1 and cohesin components, have been found in human congenital heart diseases (CHDs), although their functional mechanism during heart development remains elusive. Here, we find that MESP1 interacts with RING1A/RING1, the core component of PRC1. RING1A depletion impairs human cardiomyocyte differentiation, and cardiac abnormalities similar to those in patients with MESP1 mutations were observed in Ring1A knockout mice. Mechanistically, MESP1 associates with RING1A to activate cardiogenic genes through promoter-enhancer interactions regulated by cohesin and CTCF and histone acetylation mediated by p300. Importantly, CHD mutations of MESP1 significantly affect such mechanisms and impair target gene activation. Together, our results demonstrate the importance of MESP1-RING1A complex in heart development and provide insights into the pathogenic mechanisms of CHDs caused by mutations in MESP1, PRC1, and cohesin components.

Graphene composite structure based optical absorption pressure sensor.

In this paper, a graphene composite structure based optical absorption pressure sensor is proposed. First, a composite structure which is composed of PDMS micro-pyramid structure, graphene film, and waveguide is introduced. The sensitive mechanism and dynamic working state of the pressure sensor are analyzed continuously. Second, the mapping between the pressure on PDMS and its contact area with the graphene film is deeply analyzed, as well as the optical transmission properties of graphene combined with waveguides, followed by a series of simulations about the optical power output performance facing different pressure conditions. Finally, the designed sensor samples are prepared and a series of performance verification experiments were carried out. The experimental results show that the range of the pressure sensor is 0-870kPa. The sensitivity in the pressure range of 0-100kPa is 2.83×10-1µW/kPa. The experimental results effectively prove that the designed graphene composite structure based optical absorption pressure sensor has high sensitivity and good repeatability, which further verifies the feasibility of the design and analysis method.

Flow reversal triggers discontinuous shear thickening response across an erodible granular bed in a Couette-Poiseuille-like flow.

Granular rheology is experimentally investigated in a vertical Couette-Poiseuille-like channel flow of photoelastic disks, where an erodible bed is sheared intermittently by an upward-moving shear band and a gravity-induced reverse flow. The shear band conforms to the existing nonlocal Eyring-like rheology but the bed exhibits discontinuous shear thickening from the Bagnold inertial regime near the band-bed interface to the Herschel-Bulkley plastic regime near the static wall. This newly discovered bed rheology is rate dependent and is associated with the fragility of the contact networks indicated by the statistics of local stress states inferred from the material photoelastic responses.

Design and modeling of a graphene-based composite structure optical pressure sensor.

In this paper, a novel graphene-based composite structure optical pressure sensor is designed and built with the aid of modeling. A PDMS force-sensitive structural mechanics model is established to optimize the size of the pyramid array distributed on the PDMS layer so that to support high levels of sensitivity and stability. Meanwhile, a graphene waveguide optical model is established to obtain the optimized interference length (L), arm spacing (H) and core width (W), with the objectives of advanced sensitivity, low propagation loss, high resolution. The experimental results show that the pressure sensitivity of the proposed sensor is 17.86 nm/kPa and the maximum pressure that can be detected is 3.40 kPa, which is consistent with the theoretical analysis and verifies the feasibility of the design, also the modeling methods of the graphene-based composite structure optical pressure sensor.

Enhanced flow rate by the concentration mechanism of Tetris particles when discharged from a hopper with an obstacle.

We apply a holistic two-dimensional (2D) Tetris-like model, where particles move based on prescribed rules, to investigate the flow rate enhancement from a hopper. This phenomenon was originally reported in the literature as a feature of placing an obstacle at an optimal location near the exit of a hopper discharging athermal granular particles under gravity. We find that this phenomenon is limited to a system of sufficiently many particles. In addition to the waiting room effect, another mechanism able to explain and create the flow rate enhancement is the concentration mechanism of particles on their way to reaching the hopper exit after passing the obstacle. We elucidate the concentration mechanism by decomposing the flow rate into its constituent variables: the local area packing fraction ϕ_{l}^{E} and the averaged particle velocity v_{y}^{E} at the hopper exit. In comparison to the case without an obstacle, our results show that an optimally placed obstacle can create a net flow rate enhancement of relatively weakly driven particles, caused by the exit-bottleneck coupling if ϕ_{l}^{E}>ϕ_{o}^{c}, where ϕ_{o}^{c} is a characteristic area packing fraction marking a transition from fast to slow flow regimes of Tetris particles. Utilizing the concentration mechanism by artificially guiding particles into the central sparse space under the obstacle or narrowing the hopper exit angle under the obstacle, we can create a manmade flow rate peak of relatively strongly driven particles that initially exhibit no flow rate peak. Additionally, the enhanced flow rate can be maximized by an optimal obstacle shape, particle acceleration rate toward the hopper exit, or exit geometry of the hopper.

Status and prospects of the application of root exudates in the restoration of polluted or desertated soil.

Ecological and environmental problems including heavy metal pollution have received increasing concerns. Given the shortage of physical and chemical remediation methods in high cost and secondary pollution, using plants and microorganisms for joint remediation of environment has become one of the most important strategies. Root exudates are an important medium for information and nutrient exchange between plants and soil. The roles of plant root exudates in remediation of polluted and degradated soil have been widely studied. In this review, we described the composition, secretion mechanism and functions of root exudates and summarized the functions of root exudate in heavy metal absorption, allelopathy, interaction between roots and rhizosphere microorga-nisms, and changes in soil physical and chemical properties. The progress, challenges and prospect of applying root exdudates and rhizosphere microorganisms in the remediation of ecology and environment have also been discussed. This review could provide theoretical support for the application of plant-microorganism based environmental remediation.

Design and Optimization of the Resonator in a Resonant Accelerometer Based on Mode and Frequency Analysis.

This study aims to develop methods to design and optimize the resonator in a resonant accelerometer based on mode and frequency analysis. First, according to the working principle of a resonant accelerometer, the resonator is divided into three parts: beam I, beam II, and beam III. Using Hamilton's principle, the undamped dynamic control equation and the ordinary differential dynamic equation of the resonant beam are obtained. Moreover, the structural parameters of the accelerometer are designed and optimized by using resonator mode and frequency analysis, then using finite element simulation to verify it. Finally, 1 g acceleration tumbling experiments are built to verify the feasibility of the proposed design and optimization method. The experimental results demonstrate that the proposed accelerometer has a sensitivity of 98 Hz/g, a resolution of 0.917 mg, and a bias stability of 1.323 mg/h. The research findings suggest that according to the resonator mode and frequency analysis, the values of the resonator structural parameters are determined so that the working mode of the resonator is far away from the interference mode and avoids resonance points effectively. The research results are expected to be beneficial for a practical resonant sensor design.

Chicken interferon regulatory factor 7 (IRF7) can control ALV-J virus infection by triggering type I interferon production through affecting genes related with innate immune signaling pathway.

In order to breed new birds with strong disease resistance, it is necessary to first understand the mechanism of avian antiviral response. Interferon regulatory factor 7 (IRF7) is not only a member of type I interferons (IFNs) regulatory factor (IRFs) family, but also a major regulator of the IFN response in mammals. However, whether IRF7 is involved in the host innate immune response remains unclear in poultry, due to the absence of IRF3. Here, we first observed by HE stains that with the increase of the time of ALV-J challenge, the thymus was obviously loose and swollen, the arrangement of liver cell was disordered, and the bursa of fabricius formed vacuolated. Real-time PCR detection showed that the expression level of IRF7 gene and related immune genes in ALV-J group was significantly higher than that in control group (P < 0.05). To further study the role of chicken IRF7 during avian leukosis virus subgroup J (ALV-J) infection, we constructed an induced IRF7 overexpression and interfered chicken embryo fibroblasts (CEFs) cell and performed in vitro infection using low pathogenic ALV-J and virus analog poly(I:C). In ALV-J and poly(I:C) stimulated CEFs cells, the expression level of STAT1, IFN-α, IFN-ß, TLR3 and TLR7 were increased after IRF7 overexpressed, while the results were just the opposite after IRF7 interfered, which indicating that IRF7 may be associated with Toll-like receptor signaling pathway and JAK-STAT signaling pathway. These findings suggest that chicken IRF7 is an important regulator of IFN and is involved in chicken anti-ALV-J innate immunity.

Nonlinear Vibration Study Based on Uncertainty Analysis in MEMS Resonant Accelerometer.

This paper aims to develop a resonant accelerometer for high-sensitivity detection and to investigate the nonlinear vibration of the MEMS resonant accelerometer driven by electrostatic comb fingers. First, a nonlinear vibration model of the resonator with comb fingers in a MEMS resonant accelerometer is established. Then, the nonlinear and nonlinear stiffness coefficients are calculated and analyzed with the Galérkin principle. The linear natural frequency, tracking error, and nonlinear frequency offset are obtained by multi-scale method. Finally, to further analyze the nonlinear vibration, a sample-based stochastic model is established, and the uncertainty analysis method is applied. It is concluded from the results that nonlinear vibration can be reduced by reducing the resonant beam length and increasing the resonant beam width and thickness. In addition, the resonant beam length and thickness have more significant effects, while the resonant beam width and the single concentrated mass of comb fingers have little effect, which are verified by experiments. The results of this research have proved that uncertainty analysis is an effective approach in nonlinear vibration analysis and instructional in practical resonant accelerometer design.

Energy Balance-Related Behaviors and Body Mass Index in Asian School-Aged Children With Congenital Heart Disease.

BACKGROUND: Overweight/obesity is a substantial global public health concern, which can be caused by genetic factors and energy balance-related behaviors (EBRBs). If it occurs in children with congenital heart disease (CCHD), it can yield an extra burden on their health. Most studies on CCHD have taken place in Western societies, leaving Asian populations understudied, especially children. OBJECTIVE: We sought (1) to determine body mass index distribution among school-aged CCHD in Taiwan, (2) to ascertain whether the body mass index of CCHD differs from that of the general population, (3) to describe EBRBs in CCHD, and (4) to identify factors associated with underweight and overweight/obesity among CCHD. METHODS: In this cross-sectional study, 97 child-parent dyads (53.6% boys; mean age, 9.73 years; 25.8% moderate-to-severe heart conditions) were enrolled. Self-administered questionnaires were used to collect demographics, medical factors, food frequency, physical activity, and sedentary behaviors. Anthropometric measurements were taken in the hospital. Independent predictors of EBRBs and health conditions were calculated through logistic regression analysis. RESULTS: Among Taiwanese CCHD, 19.6% were underweight and 14.4% were overweight/obese. Children with moderate-to-severe heart defects were more often underweight. Body mass index did not differ between CCHD and children in the general population. More complex heart defects and asthma were associated with being underweight, whereas sedentary behaviors, cardiomegaly, and the New York Heart Association classification II to IV were associated with being overweight/obese. CONCLUSIONS: Sedentary lifestyle is seemingly the only EBRB correlated with being overweight. Physical activity programs for children may help prevent and treat overweight or obesity in Asian CCHD, similar to Western countries.

Deep, sub-wavelength acoustic patterning of complex and non-periodic shapes on soft membranes supported by air cavities.

Arbitrary patterning of micro-objects in liquid is crucial to many biomedical applications. Among conventional methodologies, acoustic approaches provide superior biocompatibility but are intrinsically limited to producing periodic patterns at low resolution due to the nature of standing waves and the coupling between fluid and structure vibrations. This work demonstrates a near-field acoustic platform capable of synthesizing high resolution, complex and non-periodic energy potential wells. A thin and viscoelastic membrane is utilized to modulate the acoustic wavefront on a deep, sub-wavelength scale by suppressing the structural vibration selectively on the platform. Using 3 MHz excitation (λ∼ 500 µm in water), we have experimentally validated such a concept by realizing patterning of microparticles and cells with a line resolution of 50 µm (one tenth of the wavelength). Furthermore, massively parallel patterning across a 3 × 3 mm2 area has been achieved. This new acoustic wavefront modulation mechanism is powerful for manufacturing complex biologic products.

Data-independent acquisition of the proteomics of spleens from chickens infected by avian leukosis virus.

Immunosuppression caused by avian leukemia virus J subgroup (ALV-J) infection includes atrophy or regeneration disorders of the lymphoid organs, decreased immune response, and termination of B lymphocyte maturation process and inhibition of T-lymphocyte development. The regulatory mechanism of the related resistance genes and protein expression is not clear. While searching for a molecular marker for the immune response to ALV-J infection, we detected differentially expressed proteins (DEPs) of spleens from chicken infected by ALV-J at 15th day and 30th day by the data-independent acquisition technique. Approximately 220 DEPs from the spleens of chickens infected by ALV-J were detected. To find a relatively stable biomarker molecule, we summarized the DEPs at two timepoints and selected activating signal cointegrator 1 complex subunit 3 (ASCC3), TBC1 domain family member 2 (TBC1D2), MHC class II beta chain 1 (BLB2), ensconsin (MAP7), complement component 1 Q subcomponent B chain (C1QB), and Follistatin-like 1 (FSTL1) from both comparisons for protein interaction network analysis. ASCC3, BLB2, C1QB, and FSTL1 were potential biomarkers for the complex infection mechanism of ALV-J and the dynamic immune mechanism of the body.

FOXO3 Is Expressed in Ovarian Tissues and Acts as an Apoptosis Initiator in Granulosa Cells of Chickens.

FOXO3, which encodes the transcription factor forkhead box O-3 (FoxO3), is a member of the FOXO subfamily of the forkhead box (FOX) family. FOXO3 can be negatively regulated by its phosphorylation by the PI3K/Akt signaling pathway and ultimately drives apoptosis when activated. In mammalian ovaries, the FOXO3 protein regulates atresia and follicle growth by promoting apoptosis of ovarian granulosa cells. Nonetheless, the specific effects of the FOXO3 protein on granulosa apoptosis of avian ovaries have not been elucidated. Therefore, we studied FOXO3 expression in follicles with different organization and at all hierarchical levels of chicken follicles. Via an immunofluorescence assay, the chicken follicular theca at all hierarchical levels were found to be strongly stained with an anti-FOXO3 antibody. In chicken primary ovarian granulosa cells, mRNA levels of proapoptotic factors BNIP3 and BCL2L11 decreased in the absence of FOXO3, and so did PARP-1 and cleaved caspase 3 protein levels. After treatment with a recombinant FOXO3 protein, PARP-1 and caspase 3 protein levels increased, along with mRNA levels of Bnip3 and BCL2L11 (significantly, p<0.05). In addition, FOXO3 was downregulated in chicken granulosa cells when different estradiol or FSH concentrations were applied. In conclusion, FOXO3 is expressed in chicken reproductive tissues, including follicles and ovarian granulosa cells, and promotes apoptosis of chicken ovarian granulosa cells.

Estimation of gyro bias drift due to distributed polarization cross coupling in the fiber coil.

Distributed polarization cross coupling (PCC) along the polarization-maintaining fiber (PMF), obtained from an optical coherence domain polarimetry (OCDP) system, is analyzed. It is found that the measured PCC data at each measurement location is the sum of the OCDP source coherence function centered at a series of discrete PCC points, which do not represent the true PCC information. An algorithm is developed to extract the "true" location and strength of the PCC and the extracted PCC data are no longer source dependent. A model is developed to relate the extracted PCC data in the PMF coil to the fiber optic gyro (FOG) bias drift due to coherent PCC. Experimental results obtained with a FOG with a ~3 km PMF coil and light sources of different bandwidths agree with the theoretically estimated bias drifts.