Expansion microscopy using a single anchor molecule for high-yield multiplexed imaging of proteins and RNAs.

Expansion microscopy (ExM), by physically enlarging specimens in an isotropic fashion, enables nanoimaging on standard light microscopes. Key to existing ExM protocols is the equipping of different kinds of molecules, with different kinds of anchoring moieties, so they can all be pulled apart from each other by polymer swelling. Here we present a multifunctional anchor, an acrylate epoxide, that enables proteins and RNAs to be equipped with anchors in a single experimental step. This reagent simplifies ExM protocols and reduces cost (by 2-10-fold for a typical multiplexed ExM experiment) compared to previous strategies for equipping RNAs with anchors. We show that this united ExM (uniExM) protocol can be used to preserve and visualize RNA transcripts, proteins in biologically relevant ultrastructures, and sets of RNA transcripts in patient-derived xenograft (PDX) cancer tissues and may support the visualization of other kinds of biomolecular species as well. uniExM may find many uses in the simple, multimodal nanoscale analysis of cells and tissues.

Thermal immuno-nanomedicine in cancer.

Immunotherapy has revolutionized the treatment of patients with cancer. However, promoting antitumour immunity in patients with tumours that are resistant to these therapies remains a challenge. Thermal therapies provide a promising immune-adjuvant strategy for use with immunotherapy, mostly owing to the capacity to reprogramme the tumour microenvironment through induction of immunogenic cell death, which also promotes the recruitment of endogenous immune cells. Thus, thermal immunotherapeutic strategies for various cancers are an area of considerable research interest. In this Review, we describe the role of the various thermal therapies and provide an update on attempts to combine these with immunotherapies in clinical trials. We also provide an overview of the preclinical development of various thermal immuno-nanomedicines, which are capable of combining thermal therapies with various immunotherapy strategies in a single therapeutic platform. Finally, we discuss the challenges associated with the clinical translation of thermal immuno-nanomedicines and emphasize the importance of multidisciplinary and inter-professional collaboration to facilitate the optimal translation of this technology from bench to bedside.

Split-Ring Structured All-Inorganic Perovskite Photodetector Arrays for Masterly Internet of Things.

Photodetectors with long detection distances and fast response are important media in constructing a non-contact human-machine interface for the Masterly Internet of Things (MIT). All-inorganic perovskites have excellent optoelectronic performance with high moisture and oxygen resistance, making them one of the promising candidates for high-performance photodetectors, but a simple, low-cost and reliable fabrication technology is urgently needed. Here, a dual-function laser etching method is developed to complete both the lyophilic split-ring structure and electrode patterning. This novel split-ring structure can capture the perovskite precursor droplet efficiently and achieve the uniform and compact deposition of CsPbBr3 films. Furthermore, our devices based on laterally conducting split-ring structured photodetectors possess outstanding performance, including the maximum responsivity of 1.44 × 105 mA W-1, a response time of 150 µs in 1.5 kHz and one-unit area < 4 × 10-2 mm2. Based on these split-ring photodetector arrays, we realized three-dimensional gesture detection with up to 100 mm distance detection and up to 600 mm s-1 speed detection, for low-cost, integrative, and non-contact human-machine interfaces. Finally, we applied this MIT to wearable and flexible digital gesture recognition watch panel, safe and comfortable central controller integrated on the car screen, and remote control of the robot, demonstrating the broad potential applications.

Bioinspired membrane provides periosteum-mimetic microenvironment for accelerating vascularized bone regeneration.

Periosteum plays a pivotal role in vascularization, ossification and remodeling during the healing process of bone injury. However, there are few studies focused on the construction of artificial implants with periosteum-mimetic effect. To emulate the primary role of natural periosteum or endosteal tissues in bone regeneration, here we provide a functional biomimetic membrane with micropatterns of site-specific biomineralization. The micropattern is generated by using printed hydroxyapatite nanoparticles (HANPs), combined with selective growth of biomineralized apatite and in situ coprecipitation with growth factors. The biomimetic membrane can sustainably provide a periosteum-mimetic microenvironment, such as long-term topographical guidance for cell recruitment and induced cell differentiation, by releasing calcium phosphate and growth factors. We demonstrated that rat mesenchymal stem cells (rMSCs) on such biomimetic membrane exhibited highly aligned organization, leading to enhanced angiogenesis and osteogenesis. In the rat calvarial defect model, our biomimetic membranes with biomineralized micropatterns could significantly enhance vascularized ossification and accelerate new bone formation. The current work suggests that the functionally biomimetic membranes with specific biomineralized micropatterns can be a promising alternative to periosteal autografts, with great potential for bench-to-bedside translation in orthopedics.

In vitro and in vivo osteogenesis up-regulated by two-dimensional nanosheets through a macrophage-mediated pathway.

Two-dimensional (2D) nanomaterials are attracting more and more interest in regenerative medicine due to their unique properties; however 2D biomimetic calcium mineral has not yet been developed and demonstrated application for bone tissue engineering. Here we described a novel calcium phosphate material with a 2D nanostructure that was synthesized using collagen and sodium alginate as the template. In vitro performance of the nanocrystalline material was evaluated, and we found that 2D CaP nanoparticles (NPs) enhanced the in vitro osteogenic differentiation of rat mesenchymal stem cells (rMSCs) through a macrophage-mediated signal pathway, when co-cultured with RAW 264.7 cells, rather than direct NP/stem cell interaction. A 2D topology structured surface was constructed by encapsulating the CaP nanomaterials in a gelatin hydrogel, which was demonstrated to be able to mediate in vivo ossification through a macrophage polarization related pathway in a femur defect rat model, and allowed the optimal therapeutic outcome compared to normal CaP counterparts. Our current work may have enlightened a new mechanism regarding NP-induced stem cell differentiation through immunoregulation, and the 2D CaP encapsulated hydrogel scaffold may serve as a potential alternative to autograft bone for orthopedic applications.

Non-full-length Water-Soluble CXCR4QTY and CCR5QTY Chemokine Receptors: Implication for Overlooked Truncated but Functional Membrane Receptors.

It was posited that functionalities of GPCRs require full-length sequences that are negated by residue deletions. Here we report that significantly truncated nfCCR5QTY and nfCXCR4QTY still bind native ligands. Receptor-ligand interactions were discovered from yeast 2-hybrid screening and confirmed by mating selection. Two nfCCR5QTY (SZ218a, SZ190b) and two nfCXCR4QTY (SZ158a, SZ146a) were expressed in E. coli. Synthesized receptors exhibited α-helical structures and bound respective ligands with reduced affinities. SZ190b and SZ158a were reconverted into non-QTY forms and expressed in HEK293T cells. Reconverted receptors localized on cell membranes and functioned as negative regulators for ligand-induced signaling when co-expressed with full-length receptors. CCR5-SZ190b individually can perform signaling at a reduced level with higher ligand concentration. Our findings provide insight into essential structural components for CCR5 and CXCR4 functionality, while raising the possibility that non-full-length receptors may be resulted from alternative splicing and that pseudo-genes in genomes may be present and functional in living organisms.

Delivering Proangiogenic Factors from 3D-Printed Polycaprolactone Scaffolds for Vascularized Bone Regeneration.

Natural bone is a highly vascularized tissue that relies on the vasculature for blood and nutrients supply to maintain skeletal integrity. Inadequacy of neovascularization may compromise the tissue ingrowth to the implanted scaffolds, and eventually results in failure for the repair. To tackle this issue and enhance self-vascularized bone regeneration, herein a 3D biomimetic selective lasersintering (SLS) derived scaffold, with an angiogenic growth factor immobilized on its surface, that can be released in a controlled manner is proposed. To this end, a porous polycaprolactone/hydroxyapatite (PCL/HA) scaffold is prepared via the SLS technique, which is further modified with vascular endothelial growth factor (VEGF) by coprecipitation with apatite. The resultant scaffold (PCL/HA/VEGF) has an excellent cytocompatibility, and subcutaneous implantation experiment shows that the VEGF-loaded scaffold significantly enhances the blood vessel formation compared with the VEGF-free control. It is further demonstrated that the PCL/HA/VEGF scaffold is able to enhance the in vivo bone regeneration in a rat cranial defect model. Taken together, the current study provides not only a feasible and promising scaffold candidate to enhance the vascularized bone regeneration, but also a general strategy to overcome the inadequate vascularization issue for the repair of other tissue and organs.

Bioenergetic-active materials enhance tissue regeneration by modulating cellular metabolic state.

Cellular bioenergetics (CBE) plays a critical role in tissue regeneration. Physiologically, an enhanced metabolic state facilitates anabolic biosynthesis and mitosis to accelerate regeneration. However, the development of approaches to reprogram CBE, toward the treatment of substantial tissue injuries, has been limited thus far. Here, we show that induced repair in a rabbit model of weight-bearing bone defects is greatly enhanced using a bioenergetic-active material (BAM) scaffold compared to commercialized poly(lactic acid) and calcium phosphate ceramic scaffolds. This material was composed of energy-active units that can be released in a sustained degradation-mediated fashion once implanted. By establishing an intramitochondrial metabolic bypass, the internalized energy-active units significantly elevate mitochondrial membrane potential (ΔΨm) to supply increased bioenergetic levels and accelerate bone formation. The ready-to-use material developed here represents a highly efficient and easy-to-implement therapeutic approach toward tissue regeneration, with promise for bench-to-bedside translation.

LINC01354 enhances the proliferation and invasion of lung cancer cells by regulating miR-340-5p/ATF1 signaling pathway.

Recent studies showed that long non-coding RNAs (lncRNAs) could play critical roles in tumors progression. However, the performance of LINC01354 is still limited in non-small cell lung cancer (NSCLC). In the current study, our results showed that LINC01354 was significantly increased in NSCLC tissues and cell lines. High LINC01354 expression was associated with advanced TNM stage and poor prognosis in NSCLC patients. Loss-of-function assays revealed that knockdown of LINC01354 reduced lung cancer cells proliferation and invasive ability in vitro. Subsequently, mechanism studies showed that LINC01354 positively regulated the ATF1 expression via competitive binding to miR-340-5p. Therefore, our results illustrated that LINC01354 might act as an oncogenic role by modulating the miR-340-5p/ATF1 axis, providing a novel therapeutic therapy for NSCLC treatment.

Bio-inspired hybrid nanoparticles promote vascularized bone regeneration in a morphology-dependent manner.

Current major obstacles for translating the nanoparticle (NP) morphology-related function into therapeutic purposes come from the challenges in understanding the mechanisms that determine cell lineage commitment and constructing a NP-based 3D functional structure, and few studies have successfully demonstrated clear evidence of regulating in vivo tissue regeneration by NP morphology so far. Here, we show that nanoparticle geometry can be harnessed to mediate bone regeneration in a rat cranial defect model. We successfully synthesized hydroxyapatite NPs with well-defined morphologies using a modified liquid-solution-solid (LSS) method. The NPs showed differential effects on stem cell behaviors such as particle uptake, autophagy activation and osteogenic differentiation. By integrating nanoparticles within gelatin, we achieved 3D scaffolds with uniformly-distributed nano-topologies which, can mediate in vivo osteogenesis through stimulation of autophagy, with spherical particles demonstrating the most robust bone formation capacity compared to other NPs. Our current work proposes a morphology-dependent effect of NPs on vascularization and bone formation and provides an innovative and feasible strategy for bone regenerative therapies.

Selenite-Releasing Bone Mineral Nanoparticles Retard Bone Tumor Growth and Improve Healthy Tissue Functions In Vivo.

Selenite-doped bone mineral nanoparticles can retard the growth of osteosarcoma in a nude mice model, through sustained release of selenite ions. The selenite ions released from the nanoparticles through a degradation-mediated fashion inhibit tumor metastasis. Blood routine analysis indicates that selenite ions can also improve the functions of liver, kidney, and heart.

Chimeric Protein Template-Induced Shape Control of Bone Mineral Nanoparticles and Its Impact on Mesenchymal Stem Cell Fate.

Protein-mediated molecular self-assembly has become a powerful strategy to fabricate biomimetic biomaterials with controlled shapes. Here we designed a novel chimeric molecular template made of two proteins, silk fibroin (SF) and albumin (ALB), which serve as a promoter and an inhibitor for hydroxyapatite (HA) formation, respectively, to synthesize HA nanoparticles with controlled shapes. HA nanospheres were produced by the chimeric ALB-SF template, whereas HA nanorods were generated by the SF template alone. The success in controlling the shape of HA nanoparticles allowed us to further study the effect of the shape of HA nanoparticles on the fate of rat mesenchymal stem cells (MSCs). We found that the nanoparticle shape had a crucial impact on the cellular uptake and HA nanospheres were internalized in MSCs at a faster rate. Both HA nanospheres and nanorods showed no significant influence on cell proliferation and migration. However, HA nanospheres significantly promoted the osteoblastic differentiation of MSCs in comparison to HA nanorods. Our work suggests that a chimeric combination of promoter and inhibitor proteins is a promising approach to tuning the shape of nanoparticles. It also sheds new light into the role of the shape of the HA nanoparticles in directing stem cell fate.