An Ultrahigh Mobility in Isomorphic Fluorobenzo[c][1,2,5]thiadiazole-Based Polymers.

To understand the effects rendered on the relevant basic physical properties and device function by controlling the regiochemistry of the cyclopenta[1,2-b:5,4-b']dithiophene-fluorobenzo[c][1,2,5]thiadiazole polymer (hereafter referred to as the CDT-FBT polymer), two polymers, the regiorandom polymer (RA) and regioregular version (RR), respectively, are synthesized and characterized. In addition, an efficient route for synthesizing a key monomer for RR using various synthesis scope and optimizing the reaction conditions is discussed. Although RA exhibits optical, electrochemical, and morphological properties similar to RR, it shows better field-effect transistor (FET) performance. Surprisingly, by employing a capillarity-mediated sandwich-casting process on a nanogrooved substrate, an unprecedented mobility of 17.8 cm2 V-1 s-1 is obtained for RA-based FETs; this mobility value is almost twofold greater than those of the corresponding RR-based FETs. For the first time, this study challenges previously reported results in that high carrier mobility is related to the high degree of polymer order induced by the backbone regioregularity.

Fabrication of non-enzymatic biosensor based on metallic catalyst-TiO2 hollow sphere nanocomposite for determining biomolecules.

A PtRu@TiO2-hollow nanocomposite for the detection of biomolecules was synthesized by chemical reduction. First, poly(styrene-co-vinylphenylboronic acid), PSB, was prepared as a template (approximately 250 nm) by surfactant-free emulsion polymerization. Second, PSB/TiO2 core-shell spheres were prepared by sol-gel reaction. Finally, TiO2 hollow spheres (TiO2-H) were then formed after removing the PSB template by calcination at 450 degrees C under air atmosphere. To prepare the electrocatalyst, PtRu nanoparticles (NPs) were deposited onto the TiO2-H surface by chemical reduction. The prepared PtRu@TiO2-H nanocomposite was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and elemental analysis. A non-enzymatic sensor was fabricated by depositing the as-prepared PtRu@TiO2-H nanocomposite on the surface of a glassy carbon electrode (GCE), which was prepared by a hand casting method with Nafion solution as a binder. The sensor was tested as a biomolecule sensor, especially for the detection of glucose and dopamine. The cyclic voltammograms (CV) obtained during the oxidation studies revealed that the PtRu@TiO2-H nanocomposite showed better catalytic function toward the oxidation of dopamine. The sensing range of the non-enzymatic sensor for glucose was 5.0-100 mM in a phosphate buffer. The results demonstrated the potential usefulness of this bimetallic@TiO2-H bifunctional catalyst for biosensor applications.