Life Table Parameters of the Tomato Leaf Miner Tuta absoluta (Lepidoptera: Gelechiidae) on Five Tomato Cultivars in China.

Tomato is the most preferred host plant for Tuta absoluta, a newly emerged devastating invasive pest in China. However, no study has evaluated the damage risk of T. absoluta on processed tomato worldwide. In the current study, the life table parameters of T. absoluta were systematically investigated on five tomato cultivars (one fresh tomato cultivar, four processed tomato cultivars) to determine their susceptibility to T. absoluta infestation. T. absoluta had a better population growth ability on the fresh tomato, "Dafen", showing shorter duration of the preadult stage, higher lifetime fecundity, and a higher intrinsic rate of increase compared to four processed tomato cultivars. Meanwhile, the life table parameters of T. absoluta among different processed tomato cultivars also showed significant differences. Th9 was the most susceptible to T. absoluta attack, while Th1902, Heinz1015, and Dimen2272 were the least suitable ones for its development and reproduction. In summary, these tomato cultivars are the most recommended for commercial tomato production to reduce the damage caused by T. absoluta and improve the integrated pest management strategy.

Experimental investigation of expansive bending pipe flow separation control using a surface dielectric barrier discharge plasma actuator.

Adverse pressure gradients can cause severe flow separation within typical S-shaped inlets. This results in a total pressure distortion at the aerodynamic interface plane (AIP). The expansive bending pipe, where flow separation also occurs due to the adverse pressure gradient, is the basis for investigations into S-shaped inlets. In this study, surface dielectric barrier discharge (SDBD) plasma actuators are used to moderate the total pressure distortion in the AIP of an expansive bending pipe under a 10 m/s incoming flow. Also, the influences of actuation voltage amplitude and pulsed frequency on the total pressure distortion of the AIP are investigated under two plasma actuation modes, nanosecond pulsed SDBD and alternating current (AC) SDBD. Under optimal actuation parameters, the nanosecond pulsed SDBD and the AC-SDBD can reduce the distortion index by 14.93% and 32.22%, respectively. The results demonstrate the effectiveness of SDBD plasma actuators in suppressing flow separation within expansive bending pipes.