Enhancing irrigation water quality efficiently with potassium feldspar-derived adsorbent: Heavy metal detoxification and nutrient augmentation.

The pollution of Pb2+ and Cd2+ in both irrigation water and soil, coupled with the scarcity of vital mineral nutrition, poses a significant hazard to the security and quality of agricultural products. An economical potassium feldspar-derived adsorbent (PFDA) was synthesized using potassium feldspar as the main raw material through ball milling-thermal activation technology to solve this problem. The synthesis process is cost-effective and the resulting adsorbent demonstrates high efficiency in removing Pb2+ and Cd2+ from water. The removal process is endothermic, spontaneous, and stochastic, and follows the quasi-second-order kinetics, intraparticle diffusion, and Langmuir model. The adsorption and elimination of Pb2+ and Cd2+ is largely dependent on monolayer chemical sorption. The maximum removal capacity of PFDA for Pb2+ and Cd2+ at room temperature is 417 and 56.3 mg·g-1, respectively, which is superior to most mineral-based adsorbents. The desorption of Pb2+/Cd2+ on PFDA is highly challenging at pH≥3, whereas PFDA and Pb2+/Cd2+ are recyclable at pH≤0.5. When Pb2+ and Cd2+ coexisted, Pb2+ was preferentially removed by PFDA. In the case of single adsorption, Pb2+ was mainly adsorbed onto PFDA as Pb2SiO4, PbSiO3·xH2O, Pb3SiO5, PbAl2O4, PbAl2SiO6, PbAl2Si2O8, Pb2SO5, and PbSO4, whereas Cd2+ was primarily adsorbed as CdSiO3, Cd2SiO4, and Cd3Al2Si3O12. After the complex adsorption, the main products were PbSiO3·xH2O, PbAl2Si2O8, Pb2SiO4, Pb4Al2Si2O11, Pb5SiO7, PbSO4, CdSiO3, and Cd3Al2Si3O12. The forms of mineral nutrients in single and complex adsorption were different. The main mechanisms by which PFDA removed Pb2+ and Cd2+ were chemical precipitation, complexation, electrostatic attraction, and ion exchange. In irrigation water, the elimination efficiencies of Pb2+ and Cd2+ by PFDA within 10 min were 96.0 % and 70.3 %, respectively, and the concentrations of K+, Si4+, Ca2+, and Mg2+ increased by 14.0 %, 12.4 %, 55.7 %, and 878 %, respectively, within 60 min. PFDA holds great potential to replace costly methods for treating heavy metal pollution and nutrient deficiency in irrigation water, offering a sustainable, cost-effective solution and paving a new way for the comprehensive utilization of potassium feldspar.

3D Printing of Thermo-Mechano-Responsive Photoluminescent Noncovalent Cross-Linked Ionogels with High-Stretchability and Ultralow-Hysteresis for Wearable Ionotronics and Anti-Counterfeiting.

Ionogel has recently emerged as a promising ionotronic material due to its good ionic conductivity and flexibility. However, low stretchability and significant hysteresis under long-term loading limit their mechanical stability and repeatability. Developing ultralow hysteresis ionogels with high stretchability is of great significance. Here, a simple and effective strategy is developed to fabricate highly stretchable and ultralow-hysteresis noncovalent cross-linked ionogels based on phase separation by 3D printing of 2-hydroxypropyl acrylate (HPA) in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Ingeniously, the sea-island structure of the physically cross-linked network constructed by the smaller nanodomains and larger nanodomain clusters significantly minimizes the energy dissipation, endowing these ionogels with remarkable stretchability (>1000%), ultra-low hysteresis (as low as 0.2%), excellent temperature tolerance (-33-317 °C), extraordinary ionic conductivity (up to 1.7 mS cm-1), and outstanding durability (5000 cycles). Moreover, due to the formation of nanophase separation and cross-linking structure, the as-prepared ionogels exhibit unique thermochromic and multiple photoluminescent properties, which can synergistically be applied for anti-counterfeiting and encrypting. Importantly, flexible thermo-mechano-multimodal visual ionotronic sensors for strain and temperature sensing with highly stable and reproducible electrical response over 20 000 cycles are fabricated, showing synergistically optical and electrical output performances.

Transcriptome and metabolome analysis reveal key genes and metabolic pathway responses in Leersia hexandra Swartz under Cr and Ni co-stress.

Phytoremediation, an eco-friendly approach for mitigating heavy metal contamination, is reliant on hyperaccumulators. This study focused on Leersia hexandra Swart, a known chromium (Cr) hyperaccumulator with demonstrated tolerance to multiple heavy metals. Our objective was to investigate its response to simultaneous Cr and nickel (Ni) stress over 12 days. Results from physiological experiments demonstrated a significant increase in the activities of antioxidant enzymes (APX, SOD, CAT) and glutathione (GSH) content under Cr and Ni stress, indicating enhanced antioxidant mechanisms. Transcriptome analysis revealed that stress resulted in the differential expression of 27 genes associated with antioxidant activity and metal binding, including APX, SOD, CAT, GSH, metallothionein (MT), and nicotinamide (NA). Among them, twenty differentially expressed genes (DEGs) related to GSH metabolic cycle were identified. Notably, GSTU6, GND1, and PGD were the top three related genes, showing upregulation with fold changes of 4.57, 6.07, and 3.76, respectively, indicating their crucial role in metal tolerance. The expression of selected DEGs was validated by quantitative real-time PCR, confirming the reliability of RNA-Seq data. Metabolomic analysis revealed changes in 1121 metabolites, with amino acids, flavonoids, and carbohydrates being the most affected. Furthermore, glucosinolate biosynthesis and amino acid biosynthesis pathways were represented in the KEGG pathway of differentially expressed metabolites (DEMs). This study provides insights into the tolerance mechanisms of L. hexandra under the co-stress of Cr and Ni, offering a new perspective for enhancing its remediation performance.

Stretchable and recyclable gelatin Ionogel based ionic skin with extensive temperature tolerant, self-healing, UV-shielding, and sensing capabilities.

Fabricating sustainable ionic skin with multi-functional outstanding performances using biocompatible natural polymer-based ionogel is highly desired but remains a great challenge up to now. Herein, a green and recyclable ionogel has been fabricated by in-situ cross-linking of gelatin with a green bio-based multifunctional cross-linker of Triglycidyl Naringenin in ionic liquid. Benefiting from the unique multifunctional chemical crosslinking networks along with multiple reversible non-covalent interactions, the as-prepared ionogels exhibit high stretchability (>1000 %), excellent elasticity, fast room-temperature self-healability (>98 % healing efficiency at 6 min), and good recyclability. These ionogels are also highly conductive (up to 30.7 mS/cm at 150 °C), and exhibit extensive temperature tolerance (-23 to 252 °C) and outstanding UV-shielding ability. As a result, the as-prepared ionogel can easily be applied as stretchable ionic skin for wearable sensors, which exhibits high sensitivity, fast response time (102 ms), excellent temperature tolerance, and stability over 5000 stretching-relaxing cycles. More importantly, the gelatin-based sensor can be used in signal monitor system for various human motion real-time detection. This sustainable and multifunctional ionogel provides a new idea for easy and green preparation of advanced ionic skins.

A systematic review on the flavor of soy-based fermented foods: Core fermentation microbiome, multisensory flavor substances, key enzymes, and metabolic pathways.

The characteristic flavor of fermented foods has an important impact on the purchasing decisions of consumers, and its production mechanisms are a concern for scientists worldwide. The perception of food flavor is a complex process involving olfaction, taste, vision, and oral touch, with various senses contributing to specific properties of the flavor. Soy-based fermented products are popular because of their unique flavors, especially in Asian countries, where they occupy an important place in the dietary structure. Microorganisms, known as the souls of fermented foods, can influence the sensory properties of soy-based fermented foods through various metabolic pathways, and are closely related to the formation of multisensory properties. Therefore, this review systematically summarizes the core microbiome and its interactions that play an active role in representative soy-based fermented foods, such as fermented soymilk, soy sauce, soybean paste, sufu, and douchi. The mechanism of action of the core microbial community on multisensory flavor quality is revealed here. Revealing the fermentation core microbiome and related enzymes provides important guidance for the development of flavor-enhancement strategies and related genetically engineered bacteria.

Highly Tough, Stretchable, and Recyclable Ionogels with Crosslink-Enhanced Emission Characteristics for Anti-Counterfeiting and Motion Detection.

Traditional luminescent ionogels often suffer from poor mechanical properties and a lack of recyclability and regeneration, which limits their further application and sustainable development. Herein, a luminescent ionogel with strong mechanical properties and good recyclability has been designed and fabricated by introducing dynamic coordination bonds via in situ one-step crosslinking of acrylic acid in ionic liquid of 1-ethyl-3-methylimidazolium diethylphosphate by zinc dimethacrylate. Due to the special crosslinking of dynamic coordination bonds along with the hydrogen bond interaction, the as-prepared ionogel displays excellent stretchability and toughness, good self-adhesiveness, fast self-healability, and recyclability. Interestingly, the obtained ionogels exhibit tunable photoluminescence caused by the crosslink-enhanced emission (CEE) effect from the coordination bonds. Importantly, ionogels can be applied in information storage, information encryption, anti-counterfeiting due to their simple and in situ preparation method, and their special fluorescence performances. Moreover, an ionogel-based wearable sensor has rapid response time and a high gauge factor of 3.22 within a wide strain range from 1 to 700%, which can monitor various human movements accurately from subtle to large-scale motions. This paper offers a promising way to fabricate sustainable functional ionic liquid-based composites with CEE characteristics via an in situ one-step polymerization method.

Muscle-Mimetic Highly Tough, Conductive, and Stretchable Poly(ionic liquid) Liquid Crystalline Ionogels with Ultrafast Self-Healing, Super Adhesive, and Remarkable Shape Memory Properties.

Here, we report a simple method for preparing muscle-mimetic highly tough, conductive, and stretchable liquid crystalline ionogels which contains only one poly(ionic liquid) (PIL) in an ionic liquid via in situ free radical photohomopolymerization by using nitrogen gas instead of air atmosphere. Due to eliminating the inhibition caused by dissolved oxygen, the polymerization under nitrogen gas has much higher molecular weight, lower critical sol-gel concentration, and stronger mechanical properties. More importantly, benefiting from the unique loofah-like microstructures along with the strong internal ionic interactions, entanglements of long PIL chains and liquid crystalline domains, the ionogels show special optical anisotropic, superstretchability (>8000%), high fracture strength (up to 16.52 MPa), high toughness (up to 39.22 MJ/m3), and have ultrafast self-healing, ultrastrong adhesive, and excellent shape memory properties. Due to its excellent stretchability and good conductive-strain responsiveness, the as-prepared ionogel can be easily applied for high-performance flexible and wearable sensors for motion detecting. Therefore, this paper provides an effective route and developed method to generate highly stretchable conductive liquid crystalline ionogels/elastomers that can be used in widespread flexible and wearable electronics.

Dual Thermo-Responsive and Strain-Responsive Ionogels for Smart Windows and Temperature/Motion Monitoring.

In this work, a stretchable, dual thermo-responsive and strain-responsive ionogel has been synthesized by one-step photopolymerization. The obtained ionogel shows an ultrahigh stretchability (∼3000%), a high ionic conductivity (up to 3.1 mS/cm), and a good temperature tolerance (-40 to 300 °C). Importantly, these ionogels show an upper critical solution temperature-type phase transition with a wide tunable phase-transition temperature (17.5-42.5 °C) and reversible color/transparency switching. In particular, the as-prepared ionogel-based flexible/wearable temperature monitors and smart windows show an excellent designability and programmability, temperature modulation ability, and thermal responsiveness. Moreover, the ionogels-based strain sensors have temperature- and strain-dual responsibility and a broad strain-sensing range (1-700%), which can effectively monitor various motions. This strategy of fabricating dual thermo- and strain-responsive ionogels by using a one-step method and only one polymer holds great promise for the next generation of multifunctional stimuli-responsive materials.

Structure characterization, antioxidant and emulsifying capacities of exopolysaccharide derived from Tetragenococcus halophilus SNTH-8.

Tetragenococcus halophilus exopolysaccharides (THPS) are metabolites released by T. halophilus SNTH-8 to resist a high-salt environment. Although many studies have investigated the mechanisms underlying salt tolerance shown by T. halophilus, structural characteristics as well as antioxidant and emulsifying capacities of THPS remain unclear. In this study, we isolated and purified two components, THPS-1 and THPS-2, from T. halophilus SNTH-8. Purified THPS-1 and THPS-2 were composed of arabinose, xylose, fucose, galactose, glucose, and glucuronic acid at a molar ratio of 1.66:38.95:2.11:26.12:29.73:1.43 and 0.46:40.3:0.54:30.8:1.36:25.54, respectively. The average molecular weights of THPS-1 and THPS-2 were 14.98 kDa and 21.03 kDa, respectively. Moreover, the structures of THPS-1 and THPS-2 were investigated via fourier-transform infrared spectroscopy(FT-IR), nuclear magnetic resonance spectroscopy(NMR), scanning electron microscopy(SEM), and methylation analysis. THPS-1 was a highly branched polysaccharide with a backbone of α-D-(1,4)-Xyl, α-D-(1,6)-Glc and α-D-Xyl as the terminal, while THPS-2 was a highly branched polysaccharide with a backbone of α-D-(1,4)-Xyl and ß-D-GlcA as the terminal. The branches were identified as ß-D-(1,4,6)-Gal and ß-D-(1,6)-Gal. Both THPS-1 and THPS-2 exhibited high antioxidant and emulsifying capacities. Overall, our structural analysis of THPS may further enhance research on natural emulsifiers and antioxidants.

Ultrastretchable, Adhesive, Fast Self-Healable, and Three-Dimensional Printable Photoluminescent Ionic Skin Based on Hybrid Network Ionogels.

Developing multifunctional stretchable ionic skin (I-Skin) to mimic the sensations of the human skin is of great interest and shows promising potential in wearable sensors and human-machine interfaces (HMIs). However, common ionogels prepared with small-molecule cross-linkers and single networks can hardly satisfy the requirements of adjustable mechanical properties, strong adhesion, fast self-healability, and good stability in extreme environments. Herein, an ultrastretchable (>10,000%), ultrastrong adhesive (>6.8 MPa), ultrafast self-healable (10 s), high thermally stable (-60 to 250 °C), and three-dimensional (3D)-printable photoluminescent ionogel with shape memory properties has been designed. The ionogel consists of hyperbranched polymer covalent-cross-linked poly(zwitterionic ionic liquid)-co-poly(acrylic acid) and multiple dynamic bonding cross-linked networks. The excellent performance of the ionogel-based high-stretchable strain sensor and the triboelectric nanogenerator (TENG)-based self-powered touch sensor is further demonstrated over a wide temperature range (-40 to 150 °C). More importantly, ionogel-based I-Skin can work as an HMI for human gesture recognition and real-time wireless control of robots under extreme vacuum conditions and can also self-heal immediately along with function recovery after mechanical damage.

Reconstruction of Structurally-Incomplete Matrices With Reweighted Low-Rank and Sparsity Priors.

Most matrix reconstruction methods assume that missing entries randomly distribute in the incomplete matrix, and the low-rank prior or its variants are used to well pose the problem. However, in practical applications, missing entries are structurally rather than randomly distributed, and cannot be handled by the rank minimization prior individually. To remedy this, this paper introduces new matrix reconstruction models using double priors on the latent matrix, named Reweighted Low-rank and Sparsity Priors (ReLaSP). In the proposed ReLaSP models, the matrix is regularized by a low-rank prior to exploit the inter-column and inter-row correlations, and its columns (rows) are regularized by a sparsity prior under a dictionary to exploit intra-column (-row) correlations. Both the low-rank and sparse priors are reweighted on the fly to promote low-rankness and sparsity, respectively. Numerical algorithms to solve our ReLaSP models are derived via the alternating direction method under the augmented Lagrangian multiplier framework. Results on synthetic data, image restoration tasks, and seismic data interpolation show that the proposed ReLaSP models are quite effective in recovering matrices degraded by highly structural missing and various types of noise, complementing the classic matrix reconstruction models that handle random missing only.