Advances in three-dimensional bioprinted stem cell-based tissue engineering for cardiovascular regeneration.

Three-dimensional (3D) bioprinting of cellular or biological components are an emerging field to develop tissue structures that mimic the spatial, mechanochemical and temporal characteristics of cardiovascular tissues. 3D multi-cellular and multi-domain organotypic biological constructs can better recapitulate in vivo physiology and can be utilized in a variety of applications. Such applications include in vitro cellular studies, high-throughput drug screening, disease modeling, biocompatibility analysis, drug testing and regenerative medicine. A major challenge of 3D bioprinting strategies is the inability of matrix molecules to reconstitute the complexity of the extracellular matrix and the intrinsic cellular morphologies and functions. An important factor is the inclusion of a vascular network to facilitate oxygen and nutrient perfusion in scalable and patterned 3D bioprinted tissues to promote cell viability and functionality. In this review, we summarize the new generation of 3D bioprinting techniques, the kinds of bioinks and printing materials employed for 3D bioprinting, along with the current state-of-the-art in engineered cardiovascular tissue models. We also highlight the translational applications of 3D bioprinting in engineering the myocardium cardiac valves, and vascular grafts. Finally, we discuss current challenges and perspectives of designing effective 3D bioprinted constructs with native vasculature, architecture and functionality for clinical translation and cardiovascular regeneration.

Applying deep learning to quantify empty lacunae in histologic sections of osteonecrosis of the femoral head.

Osteonecrosis of the femoral head (ONFH) is a disease in which inadequate blood supply to the subchondral bone causes the death of cells in the bone marrow. Decalcified histology and assessment of the percentage of empty lacunae are used to quantify the severity of ONFH. However, the current clinical practice of manually counting cells is a tedious and inefficient process. We utilized the power of artificial intelligence by training an established deep convolutional neural network framework, Faster-RCNN, to automatically classify and quantify osteocytes (healthy and pyknotic) and empty lacunae in 135 histology images. The adjusted correlation coefficient between the trained cell classifier and the ground truth was R = 0.98. The methods detailed in this study significantly reduced the manual effort of cell counting in ONFH histological samples and can be translated to other fields of image quantification.

Probing the role of methyl methacrylate release from spacer materials in induced membrane bone healing.

In the induced membrane (IM) technique for bone reconstruction, a poly(methyl methacrylate) (PMMA) spacer is implanted to induce formation of a foreign body membrane around the defect site. Membrane development is essential for later bone grafting success, yet the mechanism by which the IM promotes bone regeneration remains unknown, as are the ways that spacer composition plays a role in the membrane's healing potential. This study investigated the impact of leached methyl methacrylate (MMA)-the major monomeric component of PMMA-on IM development. In vitro cell culture found that MMA elution did not impact endothelial cell or mesenchymal stem cell proliferation. For in vivo analysis, we advanced a streamlined rat femoral model to efficiently study the influence of spacer properties on IM characteristics. Comparison of membrane formation around polycaprolactone (PCL), MMA-eluting PCL (high-dose PCL-MMA and low-dose PCL-MMA), and surgical PMMA revealed robust membranes enveloped all groups after 4 weeks in vivo, with elevated expression of osteogenic bone morphogenetic protein-2 and angiogenic vascular endothelial growth factor compared with the surrounding muscle and bone tissues. Growth factor quantitation in IM tissue found no statistically significant difference between groups. New bone growth, vascularization, and CD163+ macrophage populations surrounding the polymer implants were also quantified; and blood vessel formation around high-dose PCL-MMA was found to be significantly decreased compared with PCL alone. To the best of our knowledge, these findings represent the first time that results have been obtained about the characteristics of membranes formed around PCL in the IM setting.

Combining a Vascular Bundle and 3D Printed Scaffold with BMP-2 Improves Bone Repair and Angiogenesis.

Vascularization is currently considered the biggest challenge in bone tissue engineering due to necrosis in the center of large scaffolds. We established a new expendable vascular bundle model to vascularize a three-dimensional printed channeled scaffold with and without bone morphogenetic protein-2 (BMP-2) for improved healing of large segmental bone defects. Bone formation and angiogenesis in an 8 mm critical-sized bone defect in the rat femur were significantly promoted by inserting a bundle consisting of the superficial epigastric artery and vein into the central channel of a large porous polycaprolactone scaffold. Vessels were observed sprouting from the vascular bundle inserted in the central tunnel. Although the regenerated bone volume in the group receiving the scaffold and vascular bundle was similar to that of the healthy femur, the rate of union of the group was not satisfactory (25% at 8 weeks). BMP-2 delivery was found to promote not only bone formation but also angiogenesis in the critical-sized bone defects. Both insertion of the vascular bundle alone and BMP-2 loading alone induced comparable levels of angiogenesis and when used in combination, significantly greater vascular volume was observed. These findings suggest a promising new modality of treatment in large bone defects. Level of Evidence: Therapeutic level I. Impact statement Vascularization is currently the main challenge in bone tissue engineering. The combination of a vascular bundle and an osteoinductive three-dimensional printed graft significantly improved and accelerated bone regeneration and angiogenesis in critical-sized large bone defects, suggesting a promising new modality of treatment in large bone defects.

The efficacy of core decompression for steroid-associated osteonecrosis of the femoral head in rabbits.

Although core decompression (CD) is often performed in the early stage of osteonecrosis of the femoral head (ONFH), the procedure does not always prevent subsequent deterioration and the effects of CD are not fully clarified. The aim of this study is to evaluate the efficacy of CD for steroid-associated ONFH in rabbits. Twelve male and 12 female New Zealand rabbits were injected intramuscularly 20 mg/kg of methylprednisolone once and were divided into the disease control and CD groups. In the disease control group, rabbits had no treatment and were euthanized at 12 weeks postinjection. In the CD group, rabbits underwent left femoral CD at 4 weeks postinjection and were euthanized 8 weeks postoperatively. The left femurs were collected to perform morphological, biomechanical, and histological analysis. Bone mineral density and bone volume fraction in the femoral head in the CD group were significantly higher than in the disease control group. However, no difference in the mechanical strength was observed between the two groups. Histological analysis showed that alkaline phosphatase and CD31 positive cells significantly increased in the males after CD treatment. The number of empty lacunae in the surrounding trabecular bone was significantly higher in the CD group. The current study indicated that CD improved the morphological properties, but did not improve the mechanical strength in the femoral head at early-stage ONFH. These data suggest the need for additional biological, mechanical strategies, and therapeutic windows to improve the outcome of early-stage steroid-associated ONFH.

Synthetic and Bone tissue engineering graft substitutes: What is the future?

The management of large segmental bone defects caused by trauma or disease remains clinically challenging within orthopaedics. The major impediment to bone healing with current treatment options is insufficient vascularization and incorporation of graft material. Lack of rapid adequate vascularization leads to cellular necrosis within the inner regions of the implanted material and a failure of bone regeneration. Current treatment options for critical size bone defects include the continued "gold standard" autograft, allograft, synthetic bone graft substitutes, vascularized fibular graft, induced membrane technique, and distraction osteogenesis. Bone tissue engineering (BTE) remains an exciting prospect for the treatment of large segmental bone defects; however, current clinical integration of engineered scaffolds remains low. We believe that the barrier to clinical application of bone tissue engineering constructs lies in the lack of concomitant vascularization of these scaffolds. This mini-review outlines the progress made and the significant limitations remaining in successful clinical incorporation of engineered synthetic bone substitutes for segmental defects.

Preclinical induced membrane model to evaluate synthetic implants for healing critical bone defects without autograft.

Critical bone defects pose a formidable orthopaedic problem in patients with bone loss. We developed a preclinical model based on the induced membrane technique using a synthetic graft to replace autograft for healing critical bone defects. Additionally, we used a novel osteoconductive scaffold coupled with a synthetic membrane to evaluate the potential for single-stage bone regeneration. Three experimental conditions were investigated in critical femoral defects in rats. Group A underwent a two-stage procedure with insertion of a polymethylmethacrylate (PMMA) spacer followed by replacement with a 3D printed polycaprolactone(PCL)/ß-tricalcium phosphate (ß-TCP) osteoconductive scaffold after 4 weeks. Group B received a single-stage PCL/ß-TCP scaffold wrapped in a PCL-based microporous polymer film creating a synthetic membrane. Group C received a single-stage bare PCL/ß-TCP scaffold. All groups were examined by serial radiographs for callus formation. After 12 weeks, the femurs were explanted and analyzed with micro-CT and histology. Mean callus scores tended to be higher in Group A. Group A showed statistically significant greater bone formation on micro-CT compared with other groups, although bone volume fraction was similar between groups. Histology results suggested extensive bone ingrowth and new bone formation within the macroporous scaffolds in all groups and cell infiltration into the microporous synthetic membrane. This study supports the use of a critical size femoral defect in rats as a suitable model for investigating modifications to the induced membrane technique without autograft harvest. Future investigations should focus on bioactive synthetic membranes coupled with growth factors for single-stage bone healing. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Customized, degradable, functionally graded scaffold for potential treatment of early stage osteonecrosis of the femoral head.

Osteonecrosis of the femoral head (ONFH) is a debilitating disease that results in progressive collapse of the femoral head and subsequent degenerative arthritis. Few treatments provide both sufficient mechanical support and biological cues for regeneration of bone and vascularity when the femoral head is still round and therefore salvageable. We designed and 3D printed a functionally graded scaffold (FGS) made of polycaprolactone (PCL) and ß-tricalcium phosphate (ß-TCP) with spatially controlled porosity, degradation, and mechanical strength properties to reconstruct necrotic bone tissue in the femoral head. The FGS was designed to have low porosity segments (15% in proximal and distal segments) and a high porosity segment (60% in middle segment) according to the desired mechanical and osteoconductive properties at each specific site after implantation into the femoral head. The FGS was inserted into a bone tunnel drilled in rabbit femoral neck and head, and at 8 weeks after implantation, the tissue formation as well as scaffold degradation was analyzed. Micro-CT analysis demonstrated that the FGS-filled group had a significantly higher bone ingrowth ratio compared to the empty-tunnel group, and the difference was higher at the distal low porosity segments. The in vivo degradation rate of the scaffold was higher in the proximal and distal segments than in the middle segment. Histological analysis of both non-decalcified and calcified samples clearly indicated new bone ingrowth and bone marrow-containing bone formation across the FGS. A 3D printed PCL-ß-TCP FGS appears to be a promising customized resorbable load-bearing implant for treatment of early stage ONFH. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1002-1011, 2018.

Treatment of critical-sized bone defects: clinical and tissue engineering perspectives.

Critical-sized bone defects are defined as those that will not heal spontaneously within a patient's lifetime. Current treatment options include vascularized bone grafts, distraction osteogenesis, and the induced membrane technique. The induced membrane technique is an increasingly utilized method with favorable results including high rates of union. Tissue engineering holds promise in the treatment of large bone defects due to advancement of stem cell biology, novel biomaterials, and 3D bioprinting. In this review, we provide an overview of the current operative treatment strategies of critical-sized bone defects as well as the current state of tissue engineering for such defects.