Solid-State-Activated Sintering of ZnAl2O4 Ceramics Containing Cu3Nb2O8 with Superior Dielectric and Thermal Properties.

Low-temperature co-fired ceramics (LTCCs) are dielectric materials that can be co-fired with Ag or Cu; however, conventional LTCC materials are mostly poorly thermally conductive, which is problematic and requires improvement. We focused on ZnAl2O4 (gahnite) as a base material. With its high thermal conductivity (~59 W·m-1·K-1 reported for 0.83ZnAl2O4-0.17TiO2), ZnAl2O4 is potentially more thermally conductive than Al2O3 (alumina); however, it sinters densely at a moderate temperature (~1500 °C). The addition of only 4 wt.% of Cu3Nb2O8 significantly lowered the sintering temperature of ZnAl2O4 to 910 °C, which is lower than the melting point of silver (961 °C). The sample fired at 960 °C for 384 h exhibited a relative permittivity (εr) of 9.2, a quality factor by resonant frequency (Q × f) value of 105,000 GHz, and a temperature coefficient of the resonant frequency (τf) of -56 ppm·K-1. The sample exhibited a thermal conductivity of 10.1 W·m-1·K-1, which exceeds that of conventional LTCCs (~2-7 W·m-1·K-1); hence, it is a superior LTCC candidate. In addition, a mixed powder of the Cu3Nb2O8 additive and ZnAl2O4 has a melting temperature that is not significantly different from that (~970 °C) of the pristine Cu3Nb2O8 additive. The sample appears to densify in the solid state through a solid-state-activated sintering mechanism.

Co(III) Complexes with N2S3-Type Ligands as Structural/Functional Models for the Isocyanide Hydrolysis Reaction Catalyzed by Nitrile Hydratase.

It has been before reported that, in addition to hydration of nitriles, the Fe-type nitrile hydratase (NHase) also catalyzes the hydrolysis of tert-butylisocyanide ( tBuNC). In order to investigate the unique isocyanide hydrolysis by NHase, we prepared three related Co(III) model complexes, PPh4[Co(L)] (1), PPh4[Co(L-O3)] (2), and PPh4[Co(L-O4)] (3), where L is bis( N-(2-mercapto-2-methylpropionyl)aminopropyl)sulfide. The suffixes L-O3 and L-O4 indicate ligands with a sulfenate and a sulfinate and with two sulfinates, respectively, instead of the two thiolates of L. The X-ray analyses of 1 and 3 reveal trigonal bipyramidal and square pyramidal structures, respectively. Complex 2, however, has five-coordinate trigonal-bipyramidal geometry with η2-type S-O coordination by a sulfenyl group. Addition of tBuNC to 1, 2, and 3 induces an absorption spectral change as a result of formation of an octahedral Co(III) complex. This interpretation is also supported by the crystal structures of PPh4[Co(L-O4)( tBuNC)] (4) and (PPh4)2[Co(L-O4)(CN)] (5). A water molecule interacts with 3 but cannot be activated as reported previously, as demonstrated by the lack of absorption spectral change in the pH range of 5.5-10.2. Interestingly, the coordinated tBuNC is hydrolyzed by 2 and 3 at pH 10.2 to produce tBuNH2 and CO molecule, but 1 does not react. These findings provide strong evidence that hydrolysis of tBuNC by NHase proceeds not by activation of the coordinated water molecule but by coordination of the substrate. The mechanism of the hydrolysis reaction of tBuNC is explained with support provided by DFT calculations; a positively polarized C atom of tBuNC on the Co(III) center is nucleophilically attacked by a hydroxide anion activated through an interaction of the sulfenyl/sulfinyl oxygen with the nucleophile.

Co(III) complexes with N2(SO)2-type equatorial planar ligands similar to the active center of nitrile hydratase: role of the sulfenate group in the enzymatic reaction.

In order to gain an understanding of the role of the sulfenyl group of nitrile hydratase (NHase), a new Co(III) complex with a sulfenyl-type ligand (LC=O:N2(SO)2), Na[CoIII(LC=O:N2(SO)2)(tBuNC)2] (2), was synthesized. The compound includes two amide groups, two sulfenate sulfurs in the equatorial plane, and two tBuNC molecules in the axial positions. Characterization of the compound was performed by UV-vis spectroscopic, IR spectral, thermogravimetric (TG), and X-ray structure analytical methods. The results are discussed in the context of Co(III) complexes containing the corresponding sulfur-type (LC=O:N2S2) (1) and sulfinyl-type ligands (LC=O:N2(SO2)2) (3). Complex 2 crystallized with the formula Na[CoIII(LC=O:N2(SO)2)(tBuNC)2].urea.2H2O.0.5EtOH. The X-ray structure revealed that the Co(III) complex has an octahedral geometry with Co-S=av. 2.221 A, Co-N=av. 1.998 A, and Co-C=av. 1.87 A. The sulfenyl oxygen and amidate carbonyl oxygen are linked to urea, water, EtOH, and Na+ and participate in a hydrogen-bond and an electrostatic interaction. IR and TG measurements demonstrated that the coordination strength of tBuNC to the Co atom increases as follows: 1<2<3. Complex 2 has almost the same stability as 3 in all solutions tested, although 1 exhibits a release of axial ligands in nonaqueous solutions. DFT calculations for 1, 2, and 3 demonstrated that Milliken atomic charges of the Co(III) centers are +1.466, +1.536, and +1.542, respectively, indicating that the extent of oxidation of the sulfur atoms increases the Lewis acidity of the Co(III) centers. Interestingly, the solution-state IR spectrum of 2 exhibits a solvent-dependent S-O stretching frequency. The frequency decreases with an increase in the electrophilicity (acceptor number) of the solvent. This solvent dependence was not observed for 3, which has a sulfinate (SO2) group, suggesting that the sulfenyl oxygen atom has nucleophilic character and promotes strong binding of the tBuNC molecule to lower the reaction barrier. These findings may suggest that the sulfenate oxygen in native NHase acts as a base (proton acceptor) and contributes to the activation of a water molecule and/or nitrile molecule.